;;
+ pinctrl-names = "default";
Hi Tim,
In an effort to get camera working on Pico Pi i.MX7 board, I rebased the
remaining patches and put that on Github:
https://github.com/Leo-PL/openwrt/commits/pico-pi-imx7-camera-6.1
Hi Linus,
W dniu 2023-11-11 o 23:02, Linus Walleij pisze:
For devices using USB gadget serial we need to probe the modules
usb_f_acm and g_serial in order, then the available UDC (USB device
controller) interface will be hooked up to a serial port as
/dev/ttyGS0. (On the host side this appears a
W dniu 2022-08-14 o 21:15, Bjørn Mork pisze:
Lech Perczak writes:
W dniu 2022-08-14 o 18:40, Bjørn Mork pisze:
Lech Perczak writes:
I'll try your settings, on MF286D and on older MF286 as well.
My setup is a bit more convoluted, since my build has patches to use
split APN for IPv4v6
W dniu 2022-08-14 o 18:40, Bjørn Mork pisze:
Lech Perczak writes:
I'll try your settings, on MF286D and on older MF286 as well.
My setup is a bit more convoluted, since my build has patches to use
split APN for IPv4v6 dual stack and I use DHCP.
Are patches still required for dual-stack
stack and I use DHCP.
But AFAICS the gpio-restart is not required for proper modem reset. The
modem works just fine without it.
Please check what happens if you set the "power button blocker" GPIO
switch high instead of default low. It will bloc
enwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
--
Pozdrawiam,
Lech Perczak
lech.perc...@gmail.com
Mobile: +48 694 309 185
__
enwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
--
Pozdrawiam,
Lech Perczak
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
W dniu 2022-04-23 o 22:32, Hauke Mehrtens pisze:
On 4/16/22 22:26, Lech Perczak wrote:
Hello,
Recently my PR #9670 [1] which includes fixes needed to support
built-in modem of ZTE MF286R router was merged to master. The
(incomplete) support for MF286R landed together with MF286A before
sults. Also, skipping that patch can yield
merge conflicts.
[1] https://github.com/openwrt/openwrt/pull/9670
--
Pozdrawiam/Kind regards,
Lech Perczak
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/lis
kernel. This avoids changing of the flash layout
for the device.
While at that, reactivate the build for the device.
Fixes: 5d8ea6d34f9 ("ath79: Deactivate ZyXEL NBG6716 by default")
Cc: André Valentin
Cc: Hauke Mehrtens
Tested-by: Alex Henrie
Signed-off-by: Lech Perczak
---
target/l
SUPPORTED_DEVICES += onion-omega
+ KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
+ IMAGE_SIZE := 16192k
+ TPLINK_HWID := 0x0471
+endef
+TARGET_DEVICES += onion_omega
+
define Device/openmesh_common_64k
DEVICE_VENDOR := OpenMesh
DEVICE_PACKAGES := uboot-envtools
-
W dniu 2021-08-15 o 13:03, open...@aiyionpri.me pisze:
On 8/15/21 11:39 AM, Lech Perczak wrote:
[...]
I rather meant checking if it is possible to 'saveenv' from within stock
U-boot, rebooting and seeing if changes to the environment change stay
there.
Given, that the typical SPI-
W dniu 2021-08-15 o 10:30, Jan-Niklas Burfeind pisze:
On 8/14/21 7:08 PM, Lech Perczak wrote:
[...]
The six bytes at 001fd00 spell OMEGA.
Is this the only data in 0x1-0x2? What's in 0x1-0x11000?
+ read-only;
+ compatible = "n
W dniu 2021-08-14 o 17:43, Tomasz Maciej Nowak pisze:
W dniu 14.08.2021 o 16:37, Jan-Niklas Burfeind pisze:
Hey there; answer is inline too.
Thanks for picking this up!
On 8/14/21 3:54 PM, Tomasz Maciej Nowak wrote:
Hi,
one comment inline.
W dniu 14.08.2021 o 14:33, Jan-Niklas Burfeind pisze:
W dniu 2021-06-29 o 01:07, Sergey Ryazanov pisze:
On Mon, Jun 28, 2021 at 11:57 PM Lech Perczak wrote:
W dniu 2021-06-28 o 21:55, Paul Spooren pisze:
On 6/28/21 9:53 AM, John Crispin wrote:
On 28.06.21 21:14, Paul Spooren wrote:
I'm in favor of this too but if it's a core feature
W dniu 2021-06-28 o 21:55, Paul Spooren pisze:
On 6/28/21 9:53 AM, John Crispin wrote:
On 28.06.21 21:14, Paul Spooren wrote:
I'm in favor of this too but if it's a core feature (i.e. SIM card
support) we should provide the package by default to, not?
this should be explained in the wiki,
.org/mailman/listinfo/openwrt-devel
I'd very much like to see this merged too:
https://github.com/openwrt/openwrt/pull/2683
As I stated in PR:
Tested-By: Lech Perczak
--
With kind regards,
Lech Perczak
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Hi,
Answers inline.
W dniu 2019-12-24 o 20:47, Paul Fertser pisze:
Hi Lech,
Any reason you omit the list from Cc? This way nobody but me is going
to comment on your message and I'm obviously biased :)
Just forgot to use "reply to all".
On Tue, Dec 24, 2019 at 08:26:09PM +010
W dniu 2019-12-06 o 18:44, Joe Ayers pisze:
Possibly the same symptoms don't exist on 128MB RAM devices.
Like there is some if condition, which is doing some nasty things on 64M
devices? I admit, that I don't have ath10k-ct source code under my pillow, but
it doesn't make much sense to me.
C
g list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
RE450 is Wifi-only.
There is actually one supported:
https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wpa8630
--
Pozdrawiam,
Lech Perczak
___
openwrt-devel mailin
sts.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
--
Pozdrawiam,
Lech Perczak
lech.perc...@gmail.com
Mobile: +48 694 309 185
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Hello Petr,
W dniu 2018-11-18 o 21:18, Petr Štetiar pisze:
Lech Perczak [2018-11-18 17:21:46]:
well as checking if rssileds package was indeed pulled in via "opkg list
Somehow the rssileds package wasn't enabled even if I've selected building of
nano-xm-w via menu config. I
Hi Petr,
Thanks for testing!
W dniu 2018-11-18 o 17:05, Petr Štetiar pisze:
Lech Perczak [2018-11-18 01:29:08]:
Hi,
Actually, I meant building and testing on ar71xx target instead of ath79.
But anyway, you might include this little change in your patch,
because when I added this support
ably need someone more experienced with this platform (Lech?) to tell us
what might be wrong here.
-- ynezz
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
--
Pozdrawiam,
Lech Perczak
lech.perc...@gmail.com
Mobile: +48 694 309 185
Hello Petr,
W dniu 2018-11-17 o 14:04, Petr Štetiar pisze:
Lech Perczak [2018-11-17 10:25:30]:
ar9342_ubnt_xw.dtsi, and then secondary ethernet and USB only enabled in
respective .dts files. It'd be even better if someone on the list had a
Rocket M XW to test, as it is the fullest va
ector one),
and it lacks 2nd ethernet port.
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
--
Pozdrawiam,
Lech Perczak
lech.perc...@gmail.com
Mobile: +48 694 309 185
_
feedback is appreciated. Thanks!
Wasn't this possible with downgrading to AirOS 5 first just as it is
done for XM series?
Please take a look for instructions for them, on XM the procedure is
quite easy.
-- ynezz
--
Pozdrawiam,
Lech Perczak
lech.perc...@gmail.com
Mobile: +48 694 309 185
W dniu 2018-11-17 o 07:33, Petr Štetiar pisze:
Lech Perczak [2018-11-16 18:46:40]:
Hi,
For example, Nanostation is basically a Bullet with extra ethernet port, and
Rocket is a Bullet with added USB port.
Ah, thanks for explanation.
You're welcome
It'd be great if support for a
Hi,
W dniu 2018-11-16 o 16:13, Petr Štetiar pisze:
Lech Perczak [2018-11-15 19:30:00]:
Hi,
Just a couple of remarks inline, based on my knowledge about XM series.
thanks for the review!
+ ubnt,bullet-m2hp|\
I'd call it ubnt,bullet-m-xw, as this patch will very likely su
Hi,
Just a couple of remarks inline, based on my knowledge about XM series.
W dniu 2018-11-15 o 13:32, Petr Štetiar pisze:
From: Petr Štetiar
CPU: AR9342 SoC
RAM: 64 MB DDR2
Flash:8 MB NOR SPI
Ports: 100 MBit (24V PoE in)
WLAN: 2.4 GHz
UART: 1 UART on PCB marked as J1 with 1152
Hello Daniel,
Answers inline.
W dniu 2018-09-12 o 04:24, Daniel F. Dickinson pisze:
Hi,
I'm having trouble finding a concise summary of what is the policy for
using multiple leds for boot/failsafe, etc status (in this case
updating CAP324 to use both colours of the 'power' led, now that such
Hi,
W dniu 2018-08-28 o 22:29, Michael Heimpold pisze:
Hi,
"DHCP Client", even with an alternative static IP address, might not
work for some home users.
to make this work better, some companies are choosing the static fallback
IP address in the AutoIP range 169.254.x.x/16. At least Windows w
32 matches
Mail list logo
