Images found here:
http://openwrt.crc.id.au/
Steve
The code you first sent was merged with revision 39213 for the N750.
If I use your image with this patch ( the one marked ) r39211 - I can get
connected with both radios. LuCI responds in a timely fashion.
There is no lag when applying changes.
gt; happens?)
>
> Best Regards,
> Chirag
>
> PS I own 2 N750s and they run in WDS AP and WDS AP+CLIENT mode and the
> devices see each other just fine.
>
> On Thu, Feb 6, 2014 at 5:37 PM, Luis E. Garcia wrote:
>
>>
>> Images found here:
>> http://op
is busy.
I do have confirmation from another tester that the patch has now enabled
the 5GHz radio on his N750
( Check comment 25 & 26 on the following page:
https://www.crc.id.au/2014/01/10/wd-mynet-n600-n750-openwrt-update/ )
Luis
On Thu, Feb 6, 2014 at 4:59 PM, Luis E. Garcia wrote:
&g
Steve, Chirag,
I'll be testing the signal strength on both bands this week ( I don't want
to rush any results, while we wait for Gabor's answer).
For the test I'll use 3 firmware images:
- original WD N750 firmware (latest version).
- r39542 with patch.
- r39542 without patch.
I'll take note of t
Steve, Chirag,
I found where the issue is in the code.
Chirag - you're right the code in the patch submited by Gabor in the
helper-patch is where we should be putting our corrections.
File:
https://dev.openwrt.org/browser/trunk/target/linux/ar71xx/patches-3.10/613-MIPS-ath79-add-ath79_wmac_setup_e
Felix,
If I've understood correctly this fix should only be tested with Clients on
the 2.4 GHz bands right?
Let me know and I'll run the tests.
Luis
On Wed, Feb 12, 2014 at 3:40 AM, Felix Kaechele wrote:
> I cannot reproduce the issue.
>
> To test this it would be great if you could send me th
Felix,
Do you know of a way to check the status of the GPIOs from the command line?
I tried:
echo 15 > /sys/class/gpio/export
This returned an error:
write error: Device or resource busy
Luis
On Wed, Feb 12, 2014 at 6:56 AM, Luis E. Garcia wrote:
> Felix,
> If I've understood
It would seem that I get a bit better signal results with the patch.
The computer I used to test this is a Mac Mini that is stationary about 6
meter away from the N750
(There are few concrete walls in the way). For the patch I'm using the code
that you submitted on r39213:
err = gpio_request_one(gp
/gpio" was very useful.
For Radio1 (5 GHz) what is the way to test if the LNAs for that radio are
enabled/disabled??
Luis
On Wed, Feb 12, 2014 at 10:13 PM, Luis E. Garcia wrote:
> It would seem that I get a bit better signal results with the patch.
> The computer I used to test this
I've done some research about OpenWRT and saw that thew Ubicom32 targets
were removed a while back. It was my understanding that IP5K and IP7K
didn't have a Memory Management Unit (MMU) and that caused this
architecture to be not very maintainable.
The IP8K does have a MMU and in that sense it wou
Constantine,
I'm looking into porting OpenWRT to the WD MyNet N900.
Since the IP8K has an mmu it should be able to compile without too much
issues.
I'm currently trying to get the toolchain from trunk to work.
Regards,
Luis E. Garcia
On Thu, Apr 3, 2014 at 3:55 AM, José Vázquez wrot
install my custom version of the
original firmware on my N900.
The WD MyNet range are really developer friendly and very hard to brick.
Regards,
Luis E. Garcia
On Sat, Apr 5, 2014 at 2:16 PM, Constantine A. Murenin
wrote:
> Hi Luis,
>
> I'm also interested in trying out the waters
orm
optimized: speed
Built_for__WD_Stingray_Pro_2012-04-02
On Mon, Apr 7, 2014 at 4:48 AM, José Vázquez wrote:
> Seems that these boards have u-boot as bootloader so you should can
> upload your firms to RAM and boot them in it.
>
> 2014-04-06 1:30 GMT+02:00, Luis E. Garcia :
> &
der)ro,14080k(upgrade),1536k(rootfs_data),256k(fw_env)
mtdparts=mtdparts=ubicom32fc.0:512k(bootloader)ro,14080k(upgrade),1536k(rootfs_data),256k(fw_env)
stdin=serial
stdout=serial
stderr=serial
Environment size: 386/65532 bytes
On Mon, Apr 7, 2014 at 8:30 AM, Luis E. Garcia wrote:
> A
Good evening,
I just tried the BB RC2 build for this router and it seems the image is
much larger than the one for AA. Checking the installed kernel modules I
found the kmod-usb-core and an other related module. Is it possible to
eliminate these modules for this router ( and probably for the DIR-30
Hello,
When I type make menuconfig, then select "Global Build settings", then in
there the is one "compile kernel with debug filesystem enabled" is marked
as enabled by dependencies.
Its permanently checked, how do I get it to uncheck, no matter what I do it
will NOT un-check? What are it's depen
I've noticed this issue with dnsmasq, I think that miniupnp is also having
a similar issue where it dies silently after a few days.
Can I apply the same method to debug miniupnp ??
Regards,
Luis Garcia
On Tue, Aug 19, 2014 at 10:45 AM, Bastian Bittorf
wrote:
> * Steven Barth [19.08.2014 12:49
Ubicom support was removed a while back.
That specific router is using a Ubicom IP7K chip.
Within DLinks opensource files for this router there is a OpenWRT code base
but I don't how old or what version it is.
I have a small pet project to port OpenWRT to Ubicom but the more recent
IP8K chpset.
L
commendations would greatly appreciated. If no router meeting this
> specs is available then we will need to build one (probably using an
> MT7620a) although would really rather not go down this road.
>
> Suggestions are greatly appreciated.
>
> --luis
>
>
> On 9/15/14, 3
Please excuse my dumb question or just point me to the right documentation.
But is there an easy way to run AQM/Codel on BB 14.07 ?? I'm running BB on
a MyNETN750 that looks like it meets the HW requirements.
Regards,
Luis Garcia
On Thu, Oct 9, 2014 at 12:57 PM, Sebastian Moeller wrote:
> Hi Ri
Steve,
Thanks for the fix. I had also experienced this issue.
Do you know if it is possible to back-port the fix BB14.07??
Regards,
Luis Garcia
On Thu, Oct 16, 2014 at 2:20 PM, Kao Kevin
wrote:
> Hi Steve,
>
> The solution works great. I have tested it.
>
> Thanks
> Kevin
>
> -Original Mess
on the main OpenWRT distribution that can be
used to provide this functionality? ( the 2 CeroWRT packages above make
really simple to setup ).
Regards,
Luis Garcia
On Thu, Oct 9, 2014 at 2:59 PM, Sebastian Moeller wrote:
> Hi Luis,
>
>
> On Oct 9, 2014, at 20:05 , Luis E. G
back.
>
> On Thu, Feb 12, 2015 at 6:02 PM, Luis E. Garcia > wrote:
> > Sebastian , Dave,
> > Thanks for these instructions.
> > I just finished a round of 3 months testing this setup on a couple of
> MyNet
> > N750 ( AR71xx based ) in several locations.
> >
23 matches
Mail list logo
