On 5 December 2014 at 20:28, Weedy weedy2...@gmail.com wrote:
Are you connected to BTs network? Reseller?
Erm, I'm not sure how to answer the questions. My dsl is provided over
my home (POTS) land-line. My adsl contract is with Sky (I used to be a
BE customer, which was then sold to O2, which
On 17 November 2014 at 18:42, Sebastian Moeller moell...@gmx.de wrote:
Hi Richard, hi Jaime
After changing the pop values have a look at the output of “ps w” on
the router, when I tried to p;ay with these from the luci GUI I noticed that
pppd was called with lcp-echo-failure 5 while
On Dec 5, 2014 5:12 AM, Jaime T enopa...@gmail.com wrote:
Problem fixed! After hours of trying to diagnose what was going wrong,
I took a long shot and tried overwriting the openwrt-distributed adsl
firmware blob (/lib/firmware/ltq-dsl-fw-a-danube.bin) with the
firmware blob that was
On 20 November 2014 20:49, Sebastian Moeller moell...@gmx.de wrote:
Hi Jaime,
not an expert on adel modem errors, let alone lantiq, here is my attempt at
helping out:
Hi Sebastien. Thank you for trying to help me - I appreciate it.
Maybe
Hi Jaime,
On Nov 21, 2014, at 12:49 , Jaime T enopa...@gmail.com wrote:
On 20 November 2014 20:49, Sebastian Moeller moell...@gmx.de wrote:
Hi Jaime,
not an expert on adel modem errors, let alone lantiq, here is my attempt at
helping out:
Hi Sebastien. Thank you for trying to help me - I
On 17 November 2014 18:36, Sebastian Moeller moell...@gmx.de wrote:
Hi Jaime,
maybe you should also look at the rror counters. Especially the CRC and HEC
errors short before the connection drops might be interesting.
Best Regards
Sebastian
Hi everyone.
I've set lcp-echo-failure to
Hi Jaime,
not an expert on adel modem errors, let alone lantiq, here is my attempt at
helping out:
On Nov 20, 2014, at 17:26 , Jaime T enopa...@gmail.com wrote:
On 17 November 2014 18:36, Sebastian Moeller moell...@gmx.de wrote:
Hi Jaime,
maybe you should also look at the rror counters.
Hi,
On 15/11/2014 10:40, Jaime T wrote:
Hi all.
I'm running barrier breaker (r42625) on a BTHOMEHUBV2B and it's
great apart from frequent adsl disconnections (approx 40 per day). My
adsl-type is POTS so the relevant part of /etc/config/network is:
config adsl 'dsl'
option annex
On 16 November 2014 23:47, Weedy weedy2...@gmail.com wrote:
I had issues in the past with Bell sympatico stingers (made by Ikanos). They
had firmware bugs verified by both Bell and Ikanos with anything that didn't
run a broadcom DSP. There was nothing I could do except find a decent bridge
On Nov 17, 2014 12:08 PM, Jaime T enopa...@gmail.com wrote:
On 16 November 2014 23:47, Weedy weedy2...@gmail.com wrote:
I had issues in the past with Bell sympatico stingers (made by Ikanos).
They
had firmware bugs verified by both Bell and Ikanos with anything that
didn't
run a broadcom
Richard Mortimer richm+open...@oldelvet.org.uk wrote:
I think I saw something similar when I was using an ADSL connection.
When the connection was under full load (I don't remember whether it
was upstream, downstream or both) the LCP echo requests that PPPD does
seem to get
Hi Jaime,
maybe you should also look at the rror counters. Especially the CRC and HEC
errors short before the connection drops might be interesting.
Best Regards
Sebastian
On Nov 16, 2014, at 15:43 , Jaime T enopa...@gmail.com wrote:
On 15 November 2014 20:46, Michael Richardson
Hi Richard, hi Jaime
On Nov 17, 2014, at 12:33 , Richard Mortimer richm+open...@oldelvet.org.uk
wrote:
Hi,
On 15/11/2014 10:40, Jaime T wrote:
Hi all.
I'm running barrier breaker (r42625) on a BTHOMEHUBV2B and it's
great apart from frequent adsl disconnections (approx 40 per day). My
Hi Michael,
On Nov 17, 2014, at 18:39 , Michael Richardson m...@sandelman.ca wrote:
Richard Mortimer richm+open...@oldelvet.org.uk wrote:
I think I saw something similar when I was using an ADSL connection.
When the connection was under full load (I don't remember whether it
was
Sebastian Moeller moell...@gmx.de wrote:
Sounds like the something a proper BQL limit on the etherne/ATM part
of the PPPoE coud fix. For PPPoE, traffic shapping should occur on
the PPP interface
Note SQM does not care too much where you put the shaper,but if you
shape
Depending on the CO/stinger equipment it might just be your chipset is
incompatible.
I had issues in the past with Bell sympatico stingers (made by Ikanos).
They had firmware bugs verified by both Bell and Ikanos with anything that
didn't run a broadcom DSP. There was nothing I could do except
Hi all.
I'm running barrier breaker (r42625) on a BTHOMEHUBV2B and it's
great apart from frequent adsl disconnections (approx 40 per day). My
adsl-type is POTS so the relevant part of /etc/config/network is:
config adsl 'dsl'
option annex 'a2p'
option firmware
How do you know it's not the DSLAM being unstable?
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
18 matches
Mail list logo
