its definatley possible to do 12-14km links with the internal antennas as
ive done so with them using OpenWRT and no external antennas connected
but i do agree setting external or internal is a bit confusing, i read here
that setting both to 0 uses the external antenna, though nobody specifies
Thank you Ulf. Just one question, how do you switch on and off the
diversities?
Message: 1
Date: Wed, 15 Oct 2008 14:18:49 +0200
From: ulf kypke [EMAIL PROTECTED]
Subject: Re: [OpenWrt-Devel] Nanostation antenna selection support
To: OpenWrt Development List openwrt-devel
?
Message: 1
Date: Wed, 15 Oct 2008 14:18:49 +0200
From: ulf kypke [EMAIL PROTECTED]
Subject: Re: [OpenWrt-Devel] Nanostation antenna selection support
To: OpenWrt Development List openwrt-devel@lists.openwrt.org
Message-ID:
[EMAIL PROTECTED]
Content-Type: text/plain; charset=ISO-8859-1
hi
2008/10/19 Xavier Martinez [EMAIL PROTECTED]:
Thank you Ulf. Just one question, how do you switch on and off the
diversities?
hi xavier,
well on and off may not the best words for this,
general you use gpios to switch between off/on or left/right, or
high/low, or 0/1.
and the nanostation has
hi, i was working with the nanostations some weeks ago,
the big deal with the diversity is, that the nanostations has two
diversity switches,
so, as fare as i know, if diversity is complete disabled, the external
antenna plug is the default one.
if the first diversity in on and the second
Travis Kemen wrote:
If you are using the internal antenna's on a ns2 they currently work
via the madwifi rx(tx)antenna settings but to use the external antenna
you need to install gpioctl and set softled to 0 for wifi0 in sysctl,
then use gpioctl to set pin 7 low.
I've tried this procedure to
On Sat, Jul 26, 2008 at 4:07 PM, Alberto Botti
[EMAIL PROTECTED] wrote:
Hi,
I know that madwifi in OpenWrt doesn't support the Nanostation antenna
selection* , but by looking at the DD-WRT changelog I've found an
interesting patch antenna selection for ns2
Il giorno dom, 27/07/2008 alle 13.49 -0500, Travis Kemen ha scritto:
If you are using the internal antenna's on a ns2 they currently work
via the madwifi rx(tx)antenna settings but to use the external antenna
you need to install gpioctl and set softled to 0 for wifi0 in sysctl,
then use
