Martin-
Yes, it does. The LOCO images are only in the trunk, not in 14.07 - only
the nanostation xw images are currently in 14.07.
Is there any chance we could get the LOCO xw images (which, I suspect,
would also be the Bullet/Pico xw images) built for the final 14.07?
-Bill
On 09/24/2014
I just got 5 LOCO M5 units that won't run OpenWRT. They are datestamped
1422K; when I try to flash them, they give me:
received ERROR code=2, msg=Firmware check failed
I am using the Bullet M image
(openwrt-ar71xx-generic-ubnt-bullet-m-squashfs-factory.bin), flashing
with tftp in binary
I've been flashing the Nanostation Loco M5's just fine with the Nanostation
M image for 3 years without issue, and I never tried the Bullet M image.
Although, the Loco M5's I've flashed are at least 1.5years old at present.
Can you try flashing
Maybe you have one of these new Loco M5 XW? Support for that device has
been added with r42549 (9 days ago) [1] and is only available in current
trunk (unfortunately not in barrier breaker rc3).
Regards
Nico
[1]
Ben-
Thank you!
I did try the NanoStation image, with the same results. Normally either
image will flash onto the LOCO, but the NanoStation image has the
extra Ethernet port enabled, which creates a bit of confusion.
Besides, I believe the LOCO is a 1x1 (like the Bullet), not a 2x2 (like
Il 25/09/2014 01:31, Bill ha scritto:
OK, at least I know what I need to do... does anyone know if all the Ubiquiti
M devices are going to become XW models?
Yes, no more XM revision are being manufactured. The SoC previously in use
stopped production somewhere at the end of 2013.
