Hello Adrian,
On 9/18/19 4:54 PM, Adrian Schmutzler wrote:
> From a practical perspective, it does not matter which function is used,
> because the checksum is not evaluated. So one could use either
> ath10kcal_patch_mac or ath10kcal_patch_mac_crc in all cases and would get the
> same result (i
to a nullpointer
dereference.
Signed-off-by: David Bauer
---
...706-ar40xx-abort-probe-on-missig-phy.patch | 23 +++
...706-ar40xx-abort-probe-on-missig-phy.patch | 23 +++
2 files changed, 46 insertions(+)
create mode 100644
target/linux/ipq40xx/patches-4.14
Hello Adrian,
On 9/23/19 3:34 PM, Adrian Schmutzler wrote:
> qxwlan,e2600ac-c1 |\
> qxwlan,e2600ac-c2)
> - ucidef_set_interfaces_lan_wan "eth0" "eth1"
> ucidef_add_switch "switch0" \
> "0u@eth0" "3:lan" "4:lan" "0u@eth1" "5:wan"
>
This backport fixes high latency (>100ms) on the WiFi link when using a
QCA988x Wave 1 radio. The ath10k-ct driver is not affected by this bug
from my testing, hence why it hasn't been discovered earlier.
Signed-off-by: David Bauer
---
...ath10k-fix-latency-issue-for-QCA988x.pa
Hello Michal,
On 10/11/19 10:50 AM, Michal Cieslakiewicz wrote:
> This patch contains updated driver for Atheros NAND Flash Controller
> written originally by Gabor Juhos for ar71xx (aka 'ar934x-nfc').
> ath79 version has adapted to work with kernel 4.19 and Device Tree.
> It has also been renamed
rce to the U-Boot partition, where the MAC
address is always present at a fixed partition. The partition was
previously already used for the WiFi MAC-addresses.
Signed-off-by: David Bauer
---
target/linux/mpc85xx/base-files/etc/board.d/02_network | 2 +-
.../mpc85xx/files/arch/powerpc/b
This corrects the additional boardname for the image metadata to the one
used in ar71xx. The previously present additional entry was never used
on a running system.
Signed-off-by: David Bauer
---
target/linux/ath79/image/generic-ubnt.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion
Hello Michal
On 10/14/19 12:22 AM, Michal Cieslakiewicz wrote:
> Hello David,
>
> Yes, please update my commit.
>
> Thank you for your feedback, review and tests. Indeed I (wrongly)
> assumed minimalistic approach and delegated ar71xx reset procedure to
> a simple DT property. I have only WNDR43
Hello Adrian,
On 10/14/19 2:18 PM, Adrian Schmutzler wrote:
> Hi,
>
> the device name is inconsistent in model string and DEVICE_MODEL (hyphens...).
>
> However, as this is only the friendly name, it is not really important.
>
> On their homepage, Ubiquiti never uses hyphens on product names, o
Hello Adrian,
On 10/7/19 7:38 PM, Adrian Schmutzler wrote:
> The device bears two MAC addresses ("MAC 1" and "MAC 2") that
> correspond to phy0 and phy1.
>
> The ethernet MAC address (gmac0) is the same as phy0.
> As this one is accessible via local-mac-address in gmac0, the
> latter is used for
Hello,
while preparing the switch to 19.07 for the mesh-framework Gluon, we found an
issue
with ath10k, which results in an overflowing TX queue in the kernel. The
QCA9880 does
not send TX_DONE or TX_FAILED messages back to the driver, which results in the
SKBs never
being freed. Both HTT_COOKI
This commits adds packaging for the new RTW88 driver from Realtek.
It supports the Realtek 8822BE/8822CE PCIe wireless chips.
For operation, the complementary firmware has to be loaded.
Signed-off-by: David Bauer
---
package/kernel/mac80211/realtek.mk | 14 +-
1 file changed, 13
This commit adds packages for the Realtek RTl8822BE/RTL8822CE firmware
to be used with the rtw88 driver.
Signed-off-by: David Bauer
---
package/firmware/linux-firmware/realtek.mk | 15 +++
1 file changed, 15 insertions(+)
diff --git a/package/firmware/linux-firmware/realtek.mk
b
Hello John
On 10/21/19 9:22 PM, John Crispin wrote:
> On 21/10/2019 21:13, David Bauer wrote:
>> +config-$(call config_package,rtw88) += RTW88
>> +config-y += RTW88_CORE RTW88_PCI RTW88_8822BE RTW88_8822CE
>> +
>
> why not put it all behind config-$(call config
This commits adds packaging for the new RTW88 driver from Realtek.
It supports the Realtek 8822BE/8822CE PCIe wireless chips.
For operation, the complementary firmware has to be loaded.
Signed-off-by: David Bauer
---
package/kernel/mac80211/realtek.mk | 13 -
1 file changed, 12
On 10/21/19 11:40 PM, John Crispin wrote:
> On 21/10/2019 23:20, Hauke Mehrtens wrote:
>>> +define KernelPackage/rtw88
>>> + $(call KernelPackage/mac80211/Default)
>>> + TITLE:=Realtek RTL8822BE/RTL8822CE
>>> + DEPENDS+= @(PCI_SUPPORT) +kmod-mac80211 +@DRIVER_11N_SUPPORT
>>> +@DRIVER_11W_SUPP
Hello John,
On 10/21/19 11:44 PM, John Crispin wrote:
> On 21/10/2019 23:41, David Bauer wrote:
>>
>>
>> On 10/21/19 11:40 PM, John Crispin wrote:
>>> On 21/10/2019 23:20, Hauke Mehrtens wrote:
>>>>> +define KernelPackage/rtw88
>>>>&
: David Bauer
---
.../ath79/base-files/etc/board.d/02_network | 1 +
.../ath79/base-files/lib/upgrade/platform.sh | 3 +
.../ath79/dts/ar9344_aerohive_hiveap-121.dts | 237 ++
target/linux/ath79/image/nand.mk | 17 ++
target/linux/ath79/nand/config-default
This commit adds PCI support for the whole ath79 target. Previously,
this was only done in the generic and tiny subtargets.
With the introduction of the HiveAP-121, PCI will be a requirement for
all subtargets, thus moving PCI support to the target configuration.
Signed-off-by: David Bauer
This patch disables both delays on config init to align the behavior
with kernel 5.1 and higher. It can be safely dropped with kernel 5.1.
Signed-off-by: David Bauer
---
.../0038-at803x-disable-delays.patch | 27 +++
.../0038-at803x-disable-delays.patch
d iPhone 7 (iOS 13.1).
Signed-off-by: David Bauer
---
package/network/services/hostapd/files/hostapd.sh | 9 -
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/package/network/services/hostapd/files/hostapd.sh
b/package/network/services/hostapd/files/hostapd.sh
index
Hello Hauke,
On 10/30/19 8:47 PM, Hauke Mehrtens wrote:
> Do you know which, PMKSA or OKC, is needed for the iPhone?
PMKSA caching is the one required to work with the iPhone (however OKC should
not be harmful).
>
> I do not understand why the iPhone only works when one of these options
> is s
Hello Adrian,
during the CPE210v2 bringup it was discovered that the CPE210 has the wrong
bootstrap option set
for it's 25 MHz reference clock. Because of this, the device was originally not
even booting with ar71xx.
On ath79, the reference clock is not detected based on the bootstrap option,
ce
clock
based on the bootstrap bit (see first link in my previous E-Mail), so the value
from the device tree is never used for ath9k.
Best wishes
David
>
> https://github.com/openwrt/openwrt/blob/master/target/linux/ath79/dts/qca953x.dtsi#L27
>
> Best
>
> Adrian
>
>
Hello Adrian,
I've prepared the attached patch, can you check if the situation improved with
it?
Best wishes
David
On 11/5/19 5:20 PM, David Bauer wrote:
> Hello Adrian,
>
> On 11/5/19 5:14 PM, Adrian Schmutzler wrote:
>> Hi David,
>>
>> thanks for your res
Hello Adrian,
On 11/6/19 11:16 PM, m...@adrianschmutzler.de wrote:
> Hi,
>
> for the to-be-supported TP-Link Archer C6/A6 v2 US (QCA9563) there are
> reports that 5 GHz channels from 52 to 144 lead to "Device is not active"
> messages and 5 GHz WiFi disabled:
>
> https://github.com/openwrt/ope
Hello Sven,
On 11/9/19 11:52 PM, Sven Roederer wrote:
> The "append-uboot" macro is looking for the file
> "$(STAGING_DIR_IMAGE)/uboot-fritz4040.bin"
> which is provided by the u-boot-fritz4040 package. If this is not build,
> image creation
> will fail with "file not found".
The dependency com
Hello Christian,
On 11/10/19 1:10 AM, Christian Lamparter wrote:
> Technically, the eva.bin isn't necessary. It allows for an easier
> installation, but nobody apart from the 4040 uses the append-uboot
> and there have been issues in the past with this as well.
>
> Question is: should we add that
Hello Michal,
On 11/12/19 2:02 PM, Michal Cieslakiewicz wrote:
> Netgear WNDR routers (AR9344 models) like WNDR4300 have 128 MiB of flash
> memory but only first 32 MiB are used now - both by vendor's firmware and
> OpenWrt. This patch concatenates two regions of flash memory: ubi part
> of firmwa
Hello Adrian,
On 11/22/19 2:45 PM, Adrian Schmutzler wrote:
> This renames all remaining occurrences of "EEPROM" to "art" to
> further harmonize the partition labelling in ath79.
Hmm, I'm not sure if/why we should to these changes.
Ubiquiti names these partitions "EEPROM" in their firmware
and i
t;), which introduced inheritance between two
completely unrelated base-boards.
Signed-off-by: David Bauer
---
.../linux/ramips/dts/mt7621_netgear_r6220.dts | 35 ++--
...m.dtsi => mt7621_netgear_sercomm_ayx.dtsi} | 26 ++
.../dts/mt7621_netgear_sercomm_chj.dtsi | 90 ++-
.
According to the SourceForge page, the project is migrating to GitHub.
Thus, change the source of the package to GitHub.
Signed-off-by: David Bauer
---
tools/expat/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/expat/Makefile b/tools/expat/Makefile
index
ns to allow them to work
with a variable max VLAN count.
Signed-off-by: David Bauer
---
target/linux/generic/files/drivers/net/phy/ar8216.c | 10 +-
target/linux/generic/files/drivers/net/phy/ar8216.h | 8 ++--
target/linux/generic/files/drivers/net/phy/ar8327.c | 4 ++--
3 files change
Hello Jo,
On 11/25/19 1:01 PM, Jo-Philipp Wich wrote:
> Hi,
>
> does it make sense to keep the vlan/vid indirection if we increase the
> table size to 4096? A simple 1:1 mapping of the vid to the table index
> would be simpler and more robust from the configuration pov.
i would like to keep it (
This enables the CTRL_IFACE_MIB symbol for wpad-full and hostapd-full.
If it is not enabled, statistic outputs such as "hostapd_cli all_sta"
are empty.
Signed-off-by: David Bauer
---
package/network/services/hostapd/files/hostapd-basic.config | 5 +
package/network/services/hos
This enables the system LED to indicate a running firmware upgrade. This
pattern is used on most platforms provided by the generic base-files
package. ar71xx uses it's own implementation for the system-LED, where
the upgrade case is not yet implemented.
Signed-off-by: David Bauer
---
t
With this patch, txpower for the PHY is applied when configuring the PHY
instead of the VIF. Otherwise, the configured txpower is not applied for
the first initialized VIF when using DFS channels, as it is currently
applied to early when the CAC hasn't finished.
Reported-by: Martin Weinelt
---
.
The BDF originates from the vendor-firmware.
Signed-off-by: David Bauer
---
package/firmware/ipq-wifi/Makefile | 2 ++
.../ipq-wifi/board-aruba_ap-303.qca4019 | Bin 0 -> 24316 bytes
2 files changed, 2 insertions(+)
create mode 100644 package/firmware/ipq-wifi/bo
value:
$ setenv bootcmd "boot"
$ saveenv
Signed-off-by: David Bauer
---
.../ipq40xx/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 8 +
target/linux/ipq40xx/base-files/etc/inittab | 1 +
.../preinit/06_set_preinit_iface_ipq
Hello Michal,
On 12/21/19 2:54 PM, Michal Cieslakiewicz wrote:
> 1. NAND Flash (128 MiB) layout under OpenWrt is changed as follows:
>all space is assigned to 'firmware' partition which is divided into
>2 MiB kernel and 126 MiB UBI areas; vendor partitions (language and
>mtdoops) are r
This adds a (currently missing) throughput LED trigger for the rt2x00
driver. Previously, LED triggers had to be assigned to the netdev, which
was limited to a single VAP.
Signed-off-by: David Bauer
Tested-by: Christoph Krapp
---
.../612-rt2x00-led-tpt-trigger-support.patch | 44
Hello,
On 12/30/19 12:42 PM, Jo-Philipp Wich wrote:
> Hi,
>
> given that (binary release) support for 4MB devices will end with 19.07,
> I'd vote for reverting the 4K sector change in ath79 and stick with 64K
> ones as common denominator across the entire target. That will be the
> least invasive
Hello Paul,
On 12/31/19 3:15 PM, Paul Fertser wrote:
> Are any of you using the affected TP-Link boards or ath79/tiny or
> 4 MiB devices in general? What features do you actually pack in them?
> Do you plan to continue doing so past 19.XX release?
I think most regular developers do not really use
This converts all MediaTek MT7620 boards from TP-Link to use the now
supported WiFi throughput LED trigger. This way, the LED state now
covers all VAPs regardless of their name.
Signed-off-by: David Bauer
---
target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts | 1 +
target/linux/ramips
Hello Adrian,
On 1/2/20 4:25 PM, m...@adrianschmutzler.de wrote:
> while I appreciate your patch, the choice of phy0tpt vs. phy1tpt looks
> strange to me for several devices. E.g. for C20i you are converting a
> phy0radio to a phy1tpt. Is this a mistake or a misunderstanding from my side?
This
Without this commit, ft_psk_generate_local is enabled for non-PSK
networks by default. This breaks 802.11r for EAP networks.
Disable ft_psk_generate_local by default for non-PSK networks resolves
this misbehavior.
Reported-by: Martin Weinelt
Signed-off-by: David Bauer
Tested-by: Martin Weinelt
ly reset the bootcmd in the
bootloader to the original value:
$ setenv bootcmd "boot"
$ saveenv
Signed-off-by: David Bauer
---
.../ipq40xx/base-files/etc/board.d/02_network | 5 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 6 +-
.../base-files/lib/upgrade/platform.
by sysupgrading from an earlier
OpenWrt version, U-Boot TFTP or a modded U-Boot. I do not have the
original bootloader from D-Link on my device anymore, so i cannot test
the factory image.
Signed-off-by: David Bauer
---
.../linux/ath79/dts/ar9330_dlink_dir-505.dts | 149
Hello,
On 1/17/20 11:14 AM, Andreas Ziegler wrote:
> Hi,
>
> although i'm more a user than a developer, i would also prefer a sooner
> release based on 4.19 over a later release based on 5.4.
I have the same feeling. The state of many targets on 4.19 is pretty good IMHO.
So i think a timely rele
vice-tree compatible platforms by adding the
"eee-broken-1000t" or "eee-broken-100tx" properties to the PHY
node. As all usages of the old properties are migrated, this
patch can be removed.
Signed-off-by: David Bauer
---
...phy-at803x-allow-to-configure-via-dt.patch |
EE is then disabled by the PHY subsystem.
Tested on devolo WiFi pro 1200e.
Signed-off-by: David Bauer
---
target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi | 3 ++-
target/linux/ath79/dts/qca9558_engenius_ecb1750.dts | 3 ++-
target/linux/ath79/dts/qca9558_ocedo_koala.dts | 3 ++-
target/
Hello Adrian,
On 1/21/20 9:57 PM, Adrian Schmutzler wrote:
> @@ -10,7 +11,7 @@ define Build/loader-common
> $(MAKE) -C lzma-loader \
> PKG_BUILD_DIR="$@.src" \
> TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \
> - LZMA_TEXT_START=0x80a0 LOADADD
The placeholder for the 802.11ax hwmode was missing.
Signed-off-by: David Bauer
---
iwinfo_cli.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/iwinfo_cli.c b/iwinfo_cli.c
index ee5a0e2..82b409c 100644
--- a/iwinfo_cli.c
+++ b/iwinfo_cli.c
@@ -274,12 +274,12 @@ static
Perform a split wiphy dump when acquiring the hw modelist of a mac80211
device. Otherwise HE capabilities are missing from the message.
This is necessary since upstream commit f8d504caa ("nl80211: reduce
non-split wiphy dump size") (Kernel 5.9).
Signed-off-by: David Bauer
---
iwinfo
This adds 802.11ax HE specific rate information to iwinfo.
Add fields for HE status of a STA as well as DCM and guard interval
fields specific to HE operation.
Signed-off-by: David Bauer
---
api/nl80211.h| 12
include/iwinfo.h | 3 +++
iwinfo_cli.c | 14
Expose 802.11ax HE rate as well as HW / HT mode information. This is
required to add 802.11ax support to LuCI.
Signed-off-by: David Bauer
---
iwinfo.c | 45 +
1 file changed, 45 insertions(+)
diff --git a/iwinfo.c b/iwinfo.c
index 63ff2a1..6b376c4
Hi,
On 4/28/21 1:18 PM, Etienne Champetier wrote:
> Hi David,
>
> Le mer. 28 avr. 2021 à 07:07, David Bauer a écrit :
>>
>> Expose 802.11ax HE rate as well as HW / HT mode information. This is
>> required to add 802.11ax support to LuCI.
>>
>> Signed-o
Hi Hauke,
On 5/3/21 12:23 AM, Hauke Mehrtens wrote:
> This change removes setting the channels property by default to the
> channel property if nothing else is specified.
>
> When hostapd detects a DFS alarm and it has to switch channels allow
> hostapd to switch to any channel in the frequency b
ss whether
or not wolfssl is compiled hardened.
Always export wc_ecc_set_rng so tools such as hostapd can install
RNG regardless of the built settings for wolfssl.
Signed-off-by: David Bauer
---
package/libs/wolfssl/Makefile | 2 +-
.../libs/wolfssl/patches/200-ecc-rng.pat
key and WolfSSL to export the
interface regardless of the build settings.
David Bauer (2):
wolfssl: always export wc_ecc_set_rng
hostapd: wolfssl: add RNG to EC key
package/libs/wolfssl/Makefile | 2 +-
.../libs/wolfssl/patches/200-ecc-rng.patch| 50
Since upstream commit 6467de5a8840 ("Randomize z ordinates in
scalar mult when timing resistant") WolfSSL requires a RNG for
the EC key when built hardened which is the default.
Set the RNG for the EC key to fix connections for OWE clients.
Signed-off-by: David Bauer
---
packa
Hi Robert,
On 5/16/21 6:01 PM, Robert Marko wrote:
> Netlink support is required for stuff like cable testing,
> so offer it as an option.
>
> Signed-off-by: Robert Marko
> ---
> package/network/utils/ethtool/Makefile | 11 ++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff
Hi Alex,
On 6/3/21 8:18 AM, Alex Henrie wrote:
> LAN port 4 was swapped with the WAN port and the remaining three LAN
> ports were numbered in reverse order from their labels on the case.
>
> Fixes: 1a775a4fd033 ("ipq806x: add support for TP-Link Talon AD7200")
> Signed-off-by: Alex Henrie
> ---
Hi,
On 6/4/21 7:12 AM, DENG Qingfang wrote:
> Commit 8222f8e1b9be overrides AR8031's PHY features, making its SFP
> link status detection unavailable. To fix that, do not override it in
> ramips patch.
As the original patch still has to be backported to 21.02, I'd propose
to remove my hacks and i
Hi,
On 6/4/21 10:57 AM, DENG Qingfang wrote:
> Hi,
>
> On Fri, Jun 4, 2021 at 3:37 PM David Bauer wrote:
>> As the original patch still has to be backported to 21.02, I'd propose
>> to remove my hacks and instead properly backport c329e5af and 8f7e8762
>> from u
Hi,
On 6/11/21 8:08 AM, DENG Qingfang wrote:
> Hi David,
>
> Unfortunately, the issue is still not resolved, according to Minqiang.
> Reverting your 2 commits and applying my patch fixes the issue.
Can you be more precise in terms of which issues are you facing? The PHY
capabilities on
the AR83
Hi John,
On 6/12/21 12:51 AM, John Thomson wrote:
On Fri, 11 Jun 2021, at 08:10, David Bauer wrote:
Can you be more precise in terms of which issues are you facing? The
PHY capabilities on
the AR8333 now read 1000B-X as a supported link mode, so fiber
operation should be possible.
Can you
Hi Lukas,
On 6/13/21 11:43 AM, Lukas Zeller wrote:
> But I was curious to learn what the feature does, and had a look at spi-nor.c
> (spi_nor/core.c). If I haven't misread the code, it restores the addressing
> mode to 3 byte at shutdown. This means an orderly reboot will work, but a
> unexpect
hese cases and align the address space of the GPIO controller
between all SoCs, as the used address space of the driver is identical
for all these.
Signed-off-by: David Bauer
---
target/linux/ath79/dts/ar7100.dtsi | 2 +-
target/linux/ath79/dts/ar724x.dtsi | 2 +-
target/linux/ath79/dts/ar9132.dtsi
[resend, as I've missed to keep the list CC'ed]
Hi Arjun
On 7/1/21 9:50 PM, Arjun AK wrote:
Signed-off-by: Arjun AK
Describing the rationale of this change would've been nice. This package
is used on most boards with a cellular modem to provide ootb internet
capability, so please explain h
configuration in a way it fails on unset symbols
regardless of the aformentioned preconditions.
Signed-off-by: David Bauer
---
include/kernel-build.mk | 1 +
target/linux/generic/hack-5.10/205-kconfig-exit.patch | 11 +++
target/linux/generic/hack-5.4/205
Hi Jan-Niklas,
On 8/11/21 6:54 PM, Jan-Niklas Burfeind wrote:
> The Onion Omega is a hardware development platform with built-in WiFi.
>
> https://onioniot.github.io/wiki/
>
> Specifications:
> - QCA9331 @ 400 MHz (MIPS 24Kc Big-Endian Processor)
> - 64MB of DDR2 RAM running at 400 MHz
> - 16
Hi Jan,
looks pretty solid to me.
On 8/14/21 2:33 PM, Jan-Niklas Burfeind wrote:
...
> +define Device/onion_omega
> + $(Device/tplink-16mlzma)
> + SOC := ar9331
> + DEVICE_VENDOR := Onion
> + DEVICE_MODEL := Omega
> + DEVICE_PACKAGES := kmod-usb-core kmod-usb2
AR9331 uses a different USB
Hi Felix,
updating my Wireless APs (ath9k+ath10k / mt7603+mt7915) broke ARP broadcast
delivery to clients
connected to the radios with SW rate control.
Bisecting this problem revealed commit 0f688797 ("mac80211: add missing change
for encap offload
on devices with sw rate control") introduces t
Hi Felix,
On 9/6/21 2:18 PM, Felix Fietkau wrote:
>
>> On 6. Sep 2021, at 02:03, David Bauer wrote:
>>
>> Hi Felix,
>>
>> updating my Wireless APs (ath9k+ath10k / mt7603+mt7915) broke ARP broadcast
>> delivery to clients
>> connected to the radi
.
Signed-off-by: Jan Braun
[squash commits - adapt usock usage]
Signed-off-by: David Bauer
---
main.c | 1 -
openwrt/usteer/files/etc/config/usteer | 3 +
openwrt/usteer/files/etc/init.d/usteer | 1 +
remote.c | 172
Hi Bjorn,
Hi John,
On 9/26/21 10:43, Bjørn Mork wrote:
John Crispin writes:
poemgr does not use the APIs provided by libubox so I doubt that this
will land in the tree.
It's going through the packages repo according to
https://github.com/openwrt/openwrt/commit/a9839697896c4fdf8c44a06bbce466
Hi Rui,
Hi Rosen,
On 9/19/21 12:38, Rui Salvaterra wrote:
The ag71xx_ring changes are already part of the upstream driver. However, since
we're not using it at all yet, let's apply this to our driver for the time
being, as David explicitly requests performance numbers before applying it
upstream
Hi John,
On 9/26/21 14:31, John Crispin wrote:
On 26.09.21 13:34, David Bauer wrote:
That being set, the goal of poemgr is not to replace the other efforts. I'm sorry if I caused this impression.
it did not replace anything. I am fully with you on this one, realtek-poe took
the
after
association. In the worst scenario the client immediatly associates
again to the station and ends up in a kick loop.
Don't allow associating when a min_snr is configured and the client
signal is below this value.
Signed-off-by: David Bauer
---
policy.c | 18 --
1 file ch
To allow steering daemons to be aware of the STA-decided transition
target, publish WNM transition responses to ubus. This way, steerings
daemons can learn about STA-chosen targets and send a better selection
of transition candidates.
Signed-off-by: David Bauer
---
.../hostapd/patches/600
) will be invalid
neighbors: blob-array - Array of strings containing neighbor reports as
hex-string
Signed-off-by: David Bauer
---
.../services/hostapd/src/src/ap/ubus.c| 152 +-
1 file changed, 112 insertions(+), 40 deletions(-)
diff --git a/package/network
Hi Nick,
On 10/21/21 11:31, Nick wrote:
Is someone massively utilizing the ubus interface from hostapd? I'm doing this
with dawn and I saw that blocktrron already fixed some infinity loop. However,
currently DAWN is crashing the hostapd. I make extensive use of the
get_clients, all subscripti
U-Boot and sideloading via EVA. So a network request for a boot image raises
more problems than
it tries to solve.
Best
David
Signed-off-by: Enrico Mioso
CC: Christian Lamparter
CC: David Bauer
---
Reasons for this patch:
1 - There are situations where it can be nice to recover a device withou
Hi Ivar,
Hi Daniel,
On 12/9/21 23:12, Daniel Golle wrote:
Hi Ivar,
On Thu, Dec 09, 2021 at 10:14:22PM +0100, Ivar Orskaug wrote:
Hi,
P2812HNUF3 is currently broken in main because of the kernel 5.10
increase in size. This patch increases the kernel flash partition to
3072k, aligning with P2812
Hi Nick,
On 12/25/21 16:49, Nick wrote:
The flash-chip mx25l6405d that is contained in the Ubiquity Nanostation
M5 (XM) is not able to write to the flash with kernel 5.10. Probably,
caused by invalid block protection clearing. For example the logread
contains a lot of those messages:
jf
Hi Hauke,
On 1/9/22 17:55, Hauke Mehrtens wrote:
The criteria from gnu.org are irrelevant to me and I agree with Rosen and Bjørn
on that topic.
I would prefer a vote like this, this is just an example not the official vote:
-
Migrate bug reporting from bugs.openwrt.org to githu
Refresh patches after updating to hostapd v2.10.
Signed-off-by: David Bauer
---
.../001-wolfssl-init-RNG-with-ECC-key.patch | 6 ++--
...erministic-channel-on-channel-switch.patch | 6 ++--
...ix-sta-add-after-previous-connection.patch | 4 +--
...ewrite-neigh-code-to-not-depend-on-l.patch
-compilation-with-Hotspot-2.0-disabled.patch
08bdf4f90de61a84ed8f4dd918272dd9d36e2e1f
Compile-tested: wpad-wolfssl hostapd-openssl
Run-tested: ath79-generic
Signed-off-by: David Bauer
---
package/network/services/hostapd/Makefile | 6 +-
...hannels-to-be-selected-if-dfs-is-ena.patch | 60
Hi Stijn,
On 2/7/22 20:48, Stijn Tintel wrote:
On 17/01/2022 21:57, David Bauer wrote:
Refresh patches after updating to hostapd v2.10.
We usually combine bump and patch refresh in the same commit.
I don't like doing it in this case, as it makes the delta of patches /
their content h
Hi Eneas,
On 1/7/22 21:19, Eneas U de Queiroz wrote:
The 80211r r0kh and r1kh defaults are generated from the md5sum of
"$mobility_domain/$auth_secret". auth_secret is only set when using EAP
authentication, but the default key is used for SAE/PSK as well. In
this case, auth_secret is empty,
Hi,
On 5/17/22 14:12, Wojciech Dubowik wrote:
The candidate is never set in this loop. Fix it by setting it
to the first valid entry.
Applied to master. Thanks!
Best
David
Signed-off-by: Wojciech Dubowik
---
policy.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/p
In case no specific BSS color is configured, set it to a random value.
Signed-off-by: David Bauer
---
.../files/lib/netifd/wireless/mac80211.sh | 4 +++-
...tapd-config-support-random-BSS-color.patch | 24 +++
...750-qos_map_set_without_interworking.patch | 2 +-
3 files
Update hostapd to Git HEAD from 2022-05-08. This allows us to take
advantage of background radar-detection ad well as BSS color collision.
Suggested-by: Lorenzo Bianconi
Signed-off-by: David Bauer
---
package/network/services/hostapd/Makefile | 6 +-
.../hostapd/files/wpa_supplicant
Add the current BSS color to hostapd get_status method. This field is
set to -1 in case BSS color is not active for the BSS.
Signed-off-by: David Bauer
---
package/network/services/hostapd/src/src/ap/ubus.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/package/network/services
Hi Stijn,
On 6/21/22 15:36, Stijn Tintel wrote:
Multi Band Operation is required for 802.11ax certification, so let's
enable it if 802.11ax support is enabled.
I'd suggest we enable it for the -full build variants unconditionally.
Best
David
Signed-off-by: Stijn Tintel
---
package/netwo
Hi Stijn,
On 6/24/22 15:05, Stijn Tintel wrote:
On 23/06/2022 00:47, David Bauer wrote:
Hi Stijn,
On 6/21/22 15:36, Stijn Tintel wrote:
Multi Band Operation is required for 802.11ax certification, so let's
enable it if 802.11ax support is enabled.
I'd suggest we enable it for
Hi Bjorn,
On 11/4/22 09:29, Bjørn Mork wrote:
You are right that the bootloader must be fixed. But the vendor isn't
likely to do that as long as they run older kernels. I believe the
OpenWrt policy in such cases is to try to work around the issue.
Replacing the vendor bootloader is a last resor
Hi Bjorn,
On 11/7/22 13:57, Bjørn Mork wrote:
Jonas Gorski writes:
On Sun, 6 Nov 2022 at 12:50, Bjørn Mork wrote:
Jonas Gorski writes:
An option is also to set a load address for the dtb in the FIT image,
then U-Boot will relocate it before passing it to the kernel.
Yes, that is worth t
Hi Jan-Niklas,
On 12/22/22 21:12, Jan-Niklas Burfeind wrote:
+generate_mac_from_mmc_cid()
+{
+ local mmc_dev=$1
+
+ local sd_hash=$(sha256sum/sys/class/block/$mmc_dev/device/cid)
+ local mac_base=$(macaddr_canonicalize "$(echo "${sd_hash}" | dd bs=1 count=12
2>/dev/null)")
+
201 - 300 of 403 matches
Mail list logo
