Hi Darrell:
I have set burst size 2 times of rate（e.g. if rate is 1Gbps, then burst is
2Gbps）. and have tried different rate value. the result is as below:
meter rate/iperf test result: 1G / 800M
meter rate/iperf test result: 500M / 420M
meter rate/iperf test result: 200M / 172M
meter ra
Hello,
I'm new here, so sorry if i missed something or writing to wrong maillist
A bit of foreword -
We had an installation of ovs in our cloud environment and faced
networking issue with vms at random time, but mostly 3-7 minutes after
reboot(it just stops answering on every request(typical
On Mon, 11 Nov 2019 14:45:13 +
"Tobias Hofmann \(tohofman\) via discuss"
wrote:
> Hi Flavio,
>
> to follow up on this: I have just upgraded DPDK to 18.11 and OVS to
> 2.11 and I don't see this issue anymore. Also, I don't observe any
> "ring error" messages although the MTU is still at 9216
On Wed, 13 Nov 2019 14:02:33 +0200
aeris wrote:
> Hello,
>
> I'm new here, so sorry if i missed something or writing to wrong
> maillist
>
> A bit of foreword -
>
> We had an installation of ovs in our cloud environment and faced
> networking issue with vms at random time, but mostly 3-7 minu
On Tue, Nov 12, 2019 at 10:57 PM Numan Siddique wrote:
> On Wed, Nov 13, 2019 at 12:02 AM Shivaram Mysore
> wrote:
> >
> > No need to indicate "built on Ubuntu" for docker image tags.
> > Alpine tag is specifically used as it used different libraries and image
> size is small. Ideally, for Dock
Hi All,
I have an issue with popping multiple mpls headers with ovs. The pushing
via push_mpls works fine but the popping via pop_mpls triggers a warning in
the log and the operation is not accomplished.
|WARN|system@ovs-system: execute pop_mpls(eth_type=0x8847),pop_mpls
(eth_type=0x800),2 failed
> On Nov 14, 2019, at 1:46 AM, Adel Belkhiri wrote:
>
> Hi All,
>
> I have an issue with popping multiple mpls headers with ovs. The pushing via
> push_mpls works fine but the popping via pop_mpls triggers a warning in the
> log and the operation is not accomplished.
>
> |WARN|system@ovs-sy
Hi Timo
On Wed, Nov 13, 2019 at 1:00 AM txfh2007 wrote:
> Hi Darrell:
> I have set burst size 2 times of rate（e.g. if rate is 1Gbps, then
> burst is 2Gbps）. and have tried different rate value. the result is as
> below:
> meter rate/iperf test result: 1G / 800M
> meter rate/iperf test resu
