Hello,
I finally found the correct fuse software and installed it. Also PCRE and Swig.
OWFS is now enabled after the install.
I have enabled port 8080 in the Enet 2 web interface and can do a telnet
session from the terminal using expect-lite.
When I run:
/opt/owfs/bin/owserver --debug --enet
Yes. It has happened a couple more times. It does seem to be the
wiring/devices rather than the adapter. The first time it happened
today I disconnected the longest of the temperature sensors and wired
that into a separate bus on the RPI3, then it happened again, so I
disconnected the second
Is there an pattern to how you lose the devices? Same branches each time?
On Fri, Nov 15, 2013 at 6:41 AM, Mick Sulley wrote:
> I am running a Raspberry Pi with Sheepwalk RPI3 and RPI3a to give me 8
> channels, of which I use 6. Running Raspian and owfs-2.9p0
>
> I am loosing one of the channe
I am running a Raspberry Pi with Sheepwalk RPI3 and RPI3a to give me 8
channels, of which I use 6. Running Raspian and owfs-2.9p0
I am loosing one of the channels after a while, typically after 20 hours
or so. I have checked the voltages and all looks fine but none of the
devices appear in Na
