I'm using a raspberry zero with a ds2482-100 board. OWFS software is the one
from the debian repo it's self 3.1p5. (debian 9)
I's running stable for a couple of months now. Pi zero is in a greenhouse who
has a ethernet connection (usb to ethernet) with ds2408 and ds2438 (humidity)
https://fst
Also comment on what Mick mentioned about power supply problems. I 've
made a kind of ups. 5V 3A regulator IC, driven by a normal switched PS
12V and a 12V battery, divided bij Schottky diodes.
But i'm using a BeageBone Black, a uptime in this way of 2 years is not
a problem.
i'm using als
Can you see the ds2482 device on the i2c bus like?:
i2cdetect -r 1 ( 2 or 3)
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-1 using read byte commands.
I will probe address range 0x03-0x77.
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a
Use a smd adapter board like? to repair? You need very tip to solder and thin
solder 0,5 mm, almost needle like.
http://www.hobbytronics.co.uk/prototyping/smd-adapter-boards
Nico
Steinar Midtskogen schreef:
Hi all,
Many years ago I built a snow depth sensor based on the LP-THS
temperature/h
Hi all,
I've rewritten my perl script to control my greenhouse with python. It is was
for me a learning project for the python language.
It can measure and control temperatures and other sensors via ADC, timers with
sensor dependencies etc. It has also a php frontend to configure. It's still
Maybe allready noticed is website is back...
My question is now, leave it like this or shall i make a fresh start?
Nico
___
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-develop
nt from my Android device with K-9 Mail. Please excuse my brevity.
On May 17, 2019 9:03:41 AM GMT+02:00, Nico Bouthoorn via Owfs-developers
wrote:
I don't want to push it, but has someone (Mike) look into it about the
expiring of the owfs.org domain?
I wil take care of it if somen giv
my brevity.
On May 17, 2019 9:03:41 AM GMT+02:00, Nico Bouthoorn via Owfs-developers
wrote:
I don't want to push it, but has someone (Mike) look into it about the
expiring of the owfs.org domain?
I wil take care of it if somen give me the domain transfer code. If you
don'
x27;, '/uncached/',
'/settings/', '/system/', '/statistics/', '/structure/', '/simultaneous/']
It should be quite simple to replicate the owshell commands using the methods
of the proxy object.
Once you are familiar with the owfs structu
Are there any python programmers?
I can read a device with the python-ow pkg, but have any of you an example
python script how to write to a ds2408 forexample?
I'm a really a novice with python, perl is not a problem...
Thanks,
Nico
___
Owfs-devel
I don't want to push it, but has someone (Mike) look into it about the expiring
of the owfs.org domain?
I wil take care of it if somen give me the domain transfer code. If you don't
trust me, we can store it in a common place/safe.
Nico
__
. Any thoughts on making it a Github page, is it possible
to dump contents to some format suitable for that?
Perhaps add a link to github site? I couldn't find any
Johan
On 2019-05-09 20:52, Nico Bouthoorn via Owfs-developers wrote:
Hi all,
I've managed to get most important of the co
Hi all,
I've managed to get most important of the content in
https://onewirefilesystem.org (i think) The rest is still search able.
It is a pity we lost owfs.org. I've found a lot of sites referencing to this
url.
For example,
https://www.kiwi-electronics.nl/index.php?route=product/is
re is some work still to be done to hook the rest of the pages in the menu
etc. Il will work on it so now then later.
I hope it can approve you, if you like you can have a login.
Regard,
Nico
Nico Bouthoorn via Owfs-developers wrote:
i'm working on it to import the content in a
can be
reactivated.
C
On May 2, 2019, at 00:02, Nico Bouthoorn wrote:
The dropbox link is not valid anymore.
Nico
Johan Ström schreef:
The old whois information:
https://github.com/owfs/owfs/issues/35#issuecomment-480738656
Interestingly enough it seems to be the same if I do a whois rig
, Mike has previously posted a dropbox link with a
full raw dump (mysql db + php files + alot of other things) of the site.
Perhaps it held some secret passwords which have now been used to "take
over" the site, in case the domain isn't actually expired yet?
Johan
On 2019-05-02 08:41,
owfs.info and owfs.it forexample is still free, owfs.io also but expensive. i
can registrar a domain. If someone still has the content of the old webiste?
Nico
Colin Reese schreef:
Who was the registrar?
On May 1, 2019, at 23:19, Nico Bouthoorn via Owfs-developers
wrote:
Thats a
Thats a pitty... i volunteered
Matthias Urlichs via Owfs-developers schreef:
On 01.05.19 10:38, Nico Bouthoorn via Owfs-developers wrote:
Who owns the domains now?, it looks like it has nothing todo with owfs
anymore.
Owch. Typical domain grabbing idiocy. We should have transferred it
before
Who owns the domains now?, it looks like it has nothing todo with owfs anymore.
Nico
Johan Ström schreef:
At least we have a number of volunteers to take on the domain: Matthias
Urlichs, Alastair D'Silva, and Nico Bouthoorn, unless I've missed someone?
I suggest that anyone w
to another
hosting provider.
Please let me know.
Have a great day and again sorry for the inconvenience.
Email is m...@kalist.ca <mailto:m...@kalist.ca>
On Wed, Apr 10, 2019 at 3:54 AM Nico Bouthoorn mailto:n...@cuora.nl>> wrote:
I can host the website if it is a problem, i ho
I can host the website if it is a problem, i host more websites. The number
of hits and storage will not that big, i guess?
Nico
Johan Ström schreef:
Hi,
thanks for replying, good to hear from you Paul!
Based on previous discussions and current Github ticket, my guess is that the
gener
I don't know if i spam now, but i'm still using the aag weather station. It's
still runnning fine, but now and then de wind direction is stuck. i suspect the
ball bearing. Anyone experience has with that or do know the ball bearing
specifications or size?
Or do some have a good alternative fo
Just good news:
root@bb02:~# w
15:40:06 up 518 days, 21 min, 1 user, load average: 1.45, 1.37, 1.38
root@bb02:~# ps -eo pid,lstart,cmd |grep owserver
1862 Fri Aug 18 16:19:30 2017 /usr/bin/owserver --i2c=/dev/i2c-1:ALL
--error_print=1 --error_level=1 --pid-file=/var/run/owfs/owserver.pid
ro
I've never these kind of problems. I'm using just very kind random 5v supplies
what i can find. But the power is indirect driven by a beaglebone black. On
this moment i'm using a 12v lead battery and a LM 5v chip as an kind of ups:
root@bb02:~# uptime
10:58:22 up 342 days, 18:39, 1 user, loa
Setting up a mediawiki is not a problem for me as an system
administrator. Maybe i can do my part. I don't how the funds work
within owfs? Otherwise hire a virtual machine somewhere and install
mediawiki.
Nico
Johan Ström wrote:
>
> On 26/07/16 10:18, Jan Kandziora wrote:
>> Am 26.07.2016
I've pulled the latest master, in a fresh install.It is working!
thanks,
Nico
Johan Ström wrote:
> Since this HW is out there in unknown number of deployments, it makes more
> sense to add a SW fix. I added a verify_mask which ignores the button
> pull-ups on read-back.
>
> Nico: Can you p
Cool, this code is working, i did een fresh pull, the revert and a new
compile,
My display is working anyway, but other versions?
Thanks,
Nico
Johan Ström wrote:
> On 29/03/16 18:52, Nico Bouthoorn wrote:
>> Update; i've copied module/owlib/src/c/ow_2408.c file f
Update; i've copied module/owlib/src/c/ow_2408.c file from the 2.8p15 sources
to the 3.1 version, recompiled it again.
It is working now
Paul is maintainer of the code?, i've not knowledge how to debug this further.
Thanks,
Nico
Johan Ström wrote:
>
> On 27/0
1
owwrite /1F.17710200/aux/29.09C21100/LCD_H/screen aap
The debug what you asked for:
https://fstab.nl/upload/owfs3.1_debug.out
Thanks,
Nico
Johan Ström wrote:
>
> On 23/03/16 21:39, Nico Bouthoorn wrote:
>> Because my system is also being used for my central heating,
Because my system is also being used for my central heating, i've got a
temperature runaway in my house now. My wife is complaining
I've have to setup my spare first for experimenting
Nico
Andy Carter wrote:
> On Wednesday 23 Mar 2016 20:01:43 Nico Bouthoorn wrote:
>
Sorry for the delay, i've tested it also with the latest git, but it still
doesn't work anymore,
Even the clear command:
/opt/owfs/bin/owwrite /29.09C21100/LCD_H/clear 1
Easy for me to say, i'm not a c programmer. But i'm wondering has the code
changed a lot sin
ds2482-800 i2c
see https://fstab.nl/en/beaglebone
Andy Carter wrote:
> On Wednesday 16 Mar 2016 18:24:25 Nico Bouthoorn wrote:
>> I've the same issue.
>
> Guess it would have been useful to ask what 1-wire host adapter you are using
> in my pre
I've the same issue. Version owfs 2.8p15-1 is working fine, running Debian
GNU/Linux 7 on a beaglebone.
This schematic: https://fstab.nl/en/lcd_owfs
When i switch to version owfs-3.1p1 it doesn't work anymore.
Commands like this:
owwrite /29.09C21100/LCD_H/clear 1
owwrite /29.09C21
Is someone using owfs version 3.1 to drive lcd?. I'm using version
2.8p15. that is working but version 3.1 don't,
like
owwrite /29.09C21100/LCD_H/clear 1
owwrite /29.09C21100CD_H/screenyx "1,1:Test"
Thanks,
Nico
--
Ordered a new ds2482-800 chip, didn't drink the night before and
replaced/soldered the chip.All is working normally again...
Nico
Nico Bouthoorn wrote:
I've compile the 3.1 version which gives more debug information, looks
like broken
Konsole output
root@bb01:/opt# /op
_lib_close.c:(50) Libraries closed
Nico Bouthoorn wrote:
>
> I'm really puzzled, last night i've got a main power shortage. I'm running
> the owfs on a beaglebone (http://fstab.nl/beaglebone) with linux Debian
> This was working fine for years. Now the owserver don
I'm really puzzled, last night i've got a main power shortage. I'm running
the owfs on a beaglebone (http://fstab.nl/beaglebone) with linux Debian
This was working fine for years. Now the owserver don't detect the ds2482-800
device anymore.
With /usr/sbin/i2cdetect -r 1 i can see still the
Maybe not for everyone, i've soldered my own io board, for temperature
runaway in event of crash i've put a watchdog logic in between. The
strobe of ds2408 will reset a timer, a led flash when active:
http://fstab.nl/en/diagrams
Nico
Mick Sulley wrote:
> Yes I have used them, they seemed t
see my project:
http://fstab.nl/beaglebone
Nico
Jerry Scharf wrote:
Paul,
I was looking at that as well. Does anyone know what other
hardware/software/configuration would be needed to hang one or more of
these off an I2C interface of a beaglebone black? I am already going
to build a board
I've had the same when i left the power pin disconnected (ds18b20), now
i connect it to ground.
Nico
Martin Patzak (GMX) wrote:
I would check, if the raw data, read from the owfs show that effect or
if it gets introduced later.
In any case it looks like a software bug to me - I could be wrong,
Why don't you use the DS2482-800 as busmasters?, then you can make a
hub for a star configuration.
like i did on http://fstab.nl/en/beaglebone, it will work also for the
raspberry
Nico
Jan Kandziora wrote:
> Am 17.03.2014 21:14, schrieb Jan Sennesael:
>> The layout is:
>>
>> master -- 8 port
Uptime of my beaglebone black mini system and owserver:
root@bb02:~# ps -eo etime,command | grep owserver
191-11:45:06 /usr/bin/owserver --i2c=/dev/i2c-1:ALL
--pid-file=/var/run/owfs/owserver.pid
root@bb02:~# uptime
21:22:52 up 191 days, 11:46, 1 user, load average: 1.03, 0.95, 0.88
pretty
The lcd is working, see http://fstab.nl/en/lcd_owfs At the end it
was not difficult. For me the schematic on
http://owfs.org/index.php?page=lcd from AAG did't work, i got only
garbage on the screen.
Nico
Joris Meijerink wrote:
> Luckily for us there is always the wayback machine :)
> htt
I'm trying to get a 1602 display working with the ds2408. The
schematics at http://owfs.org/index.php?page=lcd are a little bit
confusing. Which should i use, from Maxim or AAG?, anyone tested these
schematics him/her self?
Hobby board is a dead link. ( there are more dead links on this page
see my sollution at the bottom of the page. http://fstab.nl/en/parts
My experience is that water always finds a way along the wire. With a u
shap tube and the tube watertight at the bottom it will eliminate that.
Nico
Håkan Elmqvist wrote:
I have for some years monitored sea water tempera
I've written a php Drupal 7 module to administer 1wire devices etc in a
mysql database and rewritten my perl script for use with owfs. It is on
http://fstab.nl/en/beaglebone to download.
Maybe useful for someone.
Nico
Hi all,
I've made a web page about my experiences with owfs and the beaglebone
black, maybe useful to someone:
http://fstab.nl/en/beaglebone
Nico
--
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's
I've no problems, what do you use as power supply?
cat /etc/os-release
PRETTY_NAME="Debian GNU/Linux 7.0 (wheezy)"
NAME="Debian GNU/Linux"
VERSION_ID="7.0"
VERSION="7.0 (wheezy)"
ID=debian
ANSI_COLOR="1;31"
HOME_URL="http://www.debian.org/";
SUPPORT_URL="http://www.debian.org/support/";
BUG_REPORT
A little bit late, but i purchased one. The reason for Beaglebone
instead of Rasberry is because it is an open source project and
Beaglebone is stronger in IO, Rasberry is stronger in video.
My experiences so far;
The standard out of the box OS is Angstrom, an OS based on busybox. For
me thi
Found this:
http://home.kpn.nl/thomas_7/1Wire/1wire_isolating.html
Putting a driver after the DS2482-x00 give more reliability for long lines?
Nico
Ivan Lisenkov wrote:
> Now I am using DS9490R, but it is very unreliable. I now I have 6
> DS18B20, 2 D2406, DS2408 and 2 DS2438. The network is
Same experience, but the passive adapter was/is very slow and not so
reliable as the ds2480
Nico
Sven Geggus wrote:
> Hello,
>
> I just tried using owfs with my old passive Adapter (just a few
> diodes) which once worked using some older Version of owfs.
>
> While it seems to work with digitemp.
I have a weather station bought from aagelectronica (old version). I've
covered the electronics with clearcoat aerosol and removed the rj
connector and soldered the wires. Those rj connectors will oxidize quickly.
The ds1820 sensors i used are encapsulated completely in epoxy resin.
(http://ww
Hi all,
I've made a website of my experiences and usage of owfs and 1-wire.
Hopefully consider you this email not as spam, i couldn't find an
other way at the owfs website.
Nico
http://www.fstab.nl/en
--
BlackBer
53 matches
Mail list logo