Hello Gonzague,
it will not really complicate to add the CoA support for Meraki switches
in PacketFence.
Can you try the attached switch module and let me know.
Also for the 802.1x issue , did you joined the server to your AD ?
Did you created realm associated to your domain ?
Regards
Fabrice
Hello Yan,
Le 2017-10-30 ?? 11:28, Yan via PacketFence-users a ??crit?0?2:
> Hi Fabrice,
>
> Thank you very much. You are right. It seems my problem was caused by
> not excuting "pfcmd configreload hard" and to "restart
> packetfence-config". After doing this, the nodes dashboard are loaded
> cor
Hello John,
so first your 802.1x authentication failled because the device is not
able to recognize the radius certificate.
On the device side uncheck verify server certificate and retry.
Next you need to register the device in order to have a production vlan
instead of the registration.
When i
Hello Nicolay,
can you restart packetfence and retry a complete authentication.
Btw post me the content of packetfence.log for the device you are
testing with.
Regards
Fabrice
Le 2017-10-30 à 11:21, Nicolay Rytchev via PacketFence-users a écrit :
> Hello Fabrice,
>
> I have applied the patch
Hi guys
I have installed the latest version of PacketFence (ZEN) on my network do
try integration with Cisco Meraki devices. I have both MR access points and
a MS220 8 port switch
I found the Meraki::MS220_8 switch type for my switch .. but I think it
might be a package that was developed back w
Hello Fabrice,
I have applied the patch, but without success.
I still see that local PF Freeradius does not send the new AVP with ACL
after authentication.
RADIUS Request User-Name = "2c:0e:3d:f2:bd:e4" User-Password = "**"
NAS-IP-Address = 10.49.253.84 NAS-Port = 4 Service-Type = Call-Check
Hey Fabrice,
Thanks so much for offering to help. I have attached the output from your
request below:
Cisco 3650 switch running IOS 12
Packetfence 6.5
Just reverted to SNMP v1 to see if it was V2 that was causing the issue. The
port comes up, joins the registration VLAN (302), receives a
From: Fabrice Durand via PacketFence-users
[mailto:packetfence-users@lists.sourceforge.net]
Sent: 30 October 2017 13:07
To: packetfence-users@lists.sourceforge.net
Cc: Fabrice Durand
Subject: Re: [PacketFence-users] Stuck on a packetfence implementation
Hello John,
i need a little bit
Hi Fabrice,
Thank you very much. You are right. It seems my problem was caused by not
excuting "pfcmd configreload hard" and to "restart packetfence-config". After
doing this, the nodes dashboard are loaded correctly. But there are 2 other
issues hope your help.
1. It always shows error "Can
Hello Nicolay,
can you test this patch:
cd /usr/local/pf
curl
https://github.com/jrouzierinverse/packetfence/commit/71968ad725dda6878f1765b991fd8375ab18fd10.diff
| patch -p1
Regards
Fabrice
Le 2017-10-30 à 09:31, Nicolay Rytchev via PacketFence-users a écrit :
> Hello Fabrice,
>
> Please s
Hello Fabrice,
Please see the result below. I noted also that RADIUS does not send new
ACL AVP after authentication:
RADIUS Request User-Name = "2c:0e:3d:f2:bd:e4" User-Password = "**"
NAS-IP-Address = 10.49.253.84 NAS-Port = 4 Service-Type = Call-Check
Framed-MTU = 1300 Called-Station-Id =
Hello John,
i need a little bit of log.
First radius log when the device connect:
raddebug -f /usr/local/pf/var/run/radiusd.sock -t 3000
Then the packetfence.log.
Regards
Fabrice
Le 2017-10-30 à 07:33, john--- via PacketFence-users a écrit :
>
> Good day everyone,
>
>
>
> I have an issue
Hello Yan,
yes of course it's possible to move the db from local to remote.
When you export the db, be sure to export the procedures too, or use the
db schema in db directory then import your data.
Also don't forget to do a pfcmd configreload hard and to restart
packetfence-config.
Regards
Fa
Good day everyone,
I have an issue with an installation of Packetfence that I just cant seem to
work out. Everything seems to run fine, the user gets a login prompt, uses
active directory to successfully login (MAB as dot1x fails), on the switch
gets added to the registration VLAN and on the la
Hi dear users,
We are going to deploy PF v7.3 in our production network recently. Our PF works
fine in standalone mode. Since I'm not so familiar with DB operation, I think
it's a little difficult for me to operate the mariadb clustering after reading
the cluster deployment guide. I'm afraid I
15 matches
Mail list logo
