Hello all,
I have setup Packefence to authenticate some devices using mab. My
connection profile is configured not to register the devices and to match
on Ethernet-NoEAP, without any source specified. The registration vlan on
my switch group is set to -1. I added the node in my node list and set
I'm on this step of the "Cluster Quick Installation Guide":
https://www.packetfence.org/doc/PacketFence_Clustering_Guide.html#_configure_cluster_conf_first_server_only
I ran his command an hour ago, and it is still running:
/usr/local/pf/bin/pfcmd configreload hard
The console is continuing to
I think I found and fixed the problem. It finally stopped with errors
after 80 some minutes.
Turns out I did not properly set the hostname of the system, which
involved also rebooting after setting it. Once I did that and
confirmed that it still matched the name in the cluster.conf file, the
Hey,
Why do I get the error message?
I installed Debian 11 myself and also installed Packetfence ISO.
Err:1 http://inverse.ca/downloads/PacketFence/debian/13.1 bullseye/bullseye
amd64 python3-impacket all 0.10.0-4
Cannot initiate the connection to
Thanks for the response.
That was one of the first things I checked when I did not see any
traffic between my WLC and PF server using tcpdump. CoA and the disconnect
option are enabled.
On Fri, Mar 22, 2024 at 7:23 AM Zammit, Ludovic wrote:
> Hello Giovanni,
>
> It looks like the device is
Any other suggestions which may help me track down this issue where I don't
see CoA traffic.
So the logs are clear, not real errors other than the ones I already
posted.
When I do a tcpdump on the packetfence server to my WLC I see some traffic
at the beginning of the captive portal session but
Am 14.03.2024 um 19:38 schrieb Zammit, Ludovic:
This is how I would do it:
- Do EAP TLS computer authentication on the devices
- Make sure to install the Root CA that signed the compter cert into
PacketFence root CA authority under Config / SSL certificate / Root CA
- Create a connection
(I'm re-sending this since I forgot to enable text-mode before
sending, so I apologize if this ends up as a duplicate.)
I'm on this step of the "Cluster Quick Installation Guide":
https://www.packetfence.org/doc/PacketFence_Clustering_Guide.html#_configure_cluster_conf_first_server_only
I ran