Emily,
Attached is the python script to use in the filer. I've added a new
MODE that can be used to set to use min or max.
Utkarsh
On Wed, Sep 14, 2011 at 11:51 AM, Guzas, Emily L CIV NUWC NWPT
wrote:
> Utkarsh,
>
> Thanks! This works pretty well in serial. However, I took your
> MaxLabelFilter
Hi.
I've got a simple script to read a csv file and open a new plot window.
One of the columns in the data file needs to be rescaled. I've had poor
luck googling around and looking at examples. Does anyone have any
suggestions?
Thanks in advance for any help.
Greg
Here is the working (e
Hi All,
The solution was to not write Nodes and Elements but N and E (in
Tecplot both are ok), remove the DT entry (I only have single type
variables anyway). I think the problem was that one has to specify
every variable or none while tecplot just fills in with single by
default. However that was
Utkarsh,
Thanks! This works pretty well in serial. However, I took your MaxLabelFilter
and tried to modify it to calculate and display minimum (instead of maximum)
array values for each time step and for some reason it isn't working -- just
assigns a zero value as the minimum. Could you take a
Emily,
Attached is a custom filter that you can use to label using maximum
for point array named ACCL. You change the "ARRAYNAME" and
"ARRAYASSOCIATION" variable to pick the array of choice. Also, though
I've only implemented getting the max value for the magnitude of the
array, you can change the
Hi folks,
If you are interested in a position at Kitware, please review the
posting below. Responses go to j...@kitware.com. Also see
http://www.kitware.com/company/jobopps.html. Specifically, see the
following positions:
- GUI and Application Software Developer
- HPC Visualization and Data Analy