Dear paraview experts,
Is it possible to record the steps, including rotating the domain using the
mouse, and then, save it to a file so that it can be played back in another
case?
Pei-ying
Sent from Yahoo Mail on Android
___
Powered by
about these stupid questions.
Pei-Ying
On Thursday, October 31, 2013 10:52 AM, Moreland, Kenneth kmo...@sandia.gov
wrote:
1. Tools - Start Trace
2. Do steps
3. Tools - Stop Trace
-Ken
From: Pei-Ying Hsieh phsieh2...@yahoo.com
Date: Thursday, October 31, 2013 5:20 AM
To: paraview paraview
Thanks a lot Ken!
Pei-ying
Sent from Yahoo Mail on Android
___
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
Dear Paraview experts,
I selected read zone and saw the cellZones in the information tab. How can I
display these zones? I am using 3.98.1. Thanks!
Pei-Ying
___
Powered by www.kitware.com
Visit other Kitware open-source projects at
In earlier version, it was obvious how to rotate and/or translate objects,
including stl geometries. But, it is not clear to me how this can be done in
paraview-3.98. Can some one point to me a direction?
Thanks!
Peiying
___
Powered by
Dear Paraview experts,
I was having issues with ParaView-3.98. Now, I found some interesting clues.
It will be appreciated if someone can shed some light on this.
I downloaded ParaView3.98 binary version. When I ran it as an user, I
received the following:
Hi,
I found out that, this problem is due to conflicts in my ./bashrc file. This
is not a paraview issue. I need to find a way to fix the conflicts in my
.bashrc.
Thanks!
Pei-Ying
From: Pei-Ying Hsieh phsieh2...@yahoo.com
To: paraview paraview
with OpenSUSE 12.2 64. All having the
same issue.
Best Regards,
Pei-Ying
From: Yumin Yuan yumin.y...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: Utkarsh Ayachit utkarsh.ayac...@kitware.com; paraview
paraview@paraview.org
Sent: Wednesday, January 9
From: Yumin Yuan yumin.y...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: Utkarsh Ayachit utkarsh.ayac...@kitware.com; paraview
paraview@paraview.org
Sent: Tuesday, January 8, 2013 5:04 PM
Subject: Re: [Paraview] ParaView from git, make fail on OpenSUSE 12.2
A trial-and-error suggestion
Hi, Utkarsh,
I am wondering if you have any suggestion on this issue. I am using Qt 4.8.1.
Thanks!
Pei-Ying
From: Utkarsh Ayachit utkarsh.ayac...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview paraview@paraview.org
Sent: Wednesday
in pqparaviewInitializer::Initialize(int, char**) ()
#19 0x00407a29 in main ()
(gdb)
From: Utkarsh Ayachit utkarsh.ayac...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview paraview@paraview.org
Sent: Monday, January 7, 2013 10:06 AM
objects.
Segmentation fault
---
Any suggestion?
Pei-Ying
From: Utkarsh Ayachit utkarsh.ayac...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview paraview@paraview.org
Sent: Wednesday, January 2, 2013 8:55 AM
Subject: Re
Hi, Utkarsh,
No, this is a release build. I do not know how to attach the debugger and the
stack trace.
Pei-Ying
From: Utkarsh Ayachit utkarsh.ayac...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview paraview@paraview.org
Sent: Wednesday
Hi, Utkarsh,
I am using Qt-4.8.1 on OpenSUSE 12.2 64 bit.
Pei-Ying
From: Utkarsh Ayachit utkarsh.ayac...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview paraview@paraview.org
Sent: Wednesday, January 2, 2013 2:35 PM
Subject: Re: [Paraview
Dear ParaView experts,
I just got the latest Paraview source code from git and tried to compile on
OpenSUSE 12.2 64 bit OS. But, got the following errors:
[ 94%] Built target pqApplicationComponents
Linking CXX executable ../../../../bin/pqPipelineApp
initialization). I'd suggest waiting for the next release candidate and
giving it a try. I don't think it has anything to do with your installed Qt
since ParaView binary packages it's own Qt.
Utkarsh
On Sun, Nov 18, 2012 at 9:01 PM, Pei-Ying Hsieh phsieh2...@yahoo.com wrote:
Dear ParaView
Dear ParaView developers,
I just downloaded PV-3.98-RC-Linux-64bit (binary version) and unpacked on
OpenSUSE-12.2 64 bit OS. When I ran paraview, I got the following error:
hsieh@tainan:~/paraview/ParaView-3.98.0-RC1-Linux-64bit/bin ./paraview
ERROR: In
to update to the latest git-master and see if that
solves the problem. We don't see the same issue on any of the
dashboards with git-master.
Utkarsh
On Sat, Sep 29, 2012 at 2:59 PM, Pei-Ying Hsieh phsieh2...@yahoo.com wrote:
Hi, Utkarch
From: Utkarsh Ayachit utkarsh.ayac...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview paraview@paraview.org
Sent: Saturday, September 29, 2012 10:29 AM
Subject: Re: [Paraview] error when running the development version from git
What
...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview paraview@paraview.org
Sent: Saturday, September 29, 2012 10:29 AM
Subject: Re: [Paraview] error when running the development version from git
What is the exact version you're using?
paraview --version
What steps did you perform
Dear ParaView experts,
I grabbed paraview and PVVTK from git. Now I have a folder called ParaView and
a folder called PVVTK. How do I merge the two so that I can compile both
together?
Thanks
Peiying
___
Powered by www.kitware.com
Visit other
just need to update all
the submodules by executing the following command line:
git submodule update --init
This will automatically fetch and update VTK inside ParaView without
involving you in any merge or so.
Hope this helps,
Seb
On Fri, Sep 28, 2012 at 7:50 AM, Pei-Ying Hsieh
Dear ParaView experts,
I grabbed the latest paraview source for git. Compilation and installation
went through successfully, but, when I ran paraview, I got the following error:
ERROR: In
/home/hsieh/projects/ParaView/VTK/GUISupport/Qt/vtkEventQtSlotConnect.cxx, line
68
vtkEventQtSlotConnect
Dear ParaView developers,
I downloaded paraview-3.14.1 binary for linux 64 bit OS and unpacked on an
OpenSUSE 12.2 64 bit OS. When I started paraview, I got segmentation fault.
I am wondering how I can address this issue. Thanks!
Best Regards,
Dear Paraview experts,
I am wondering how I can produce uniform velocity vector of the flow field
using Glyph. When I unchecked the mask points, paraview plots vector at ALL
points. This is way too much for my case. I would like to reduce the number
of vectors. However, if I selected the
apply resample with dataset?
Pei-Ying
From: David E DeMarle dave.dema...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview paraview@paraview.org
Sent: Friday, July 20, 2012 11:13 AM
Subject: Re: [Paraview] producing uniform velocity vector?
Apply
it
from the visualization.
Felipe
Le 18 mai 12 à 23:18, Pei-Ying Hsieh a écrit :
Dear Paraview experts,
I have a fluid mesh (and liquid/air interfaces) with refinements - see
picture attached. There is only 1 fluid domain and this domain has not been
partitioned. But, paraview
Thanks a lot David!
Both methods worked great!
Pei-Ying
From: David E DeMarle dave.dema...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview paraview@paraview.org
Sent: Wednesday, April 25, 2012 3:23 PM
Subject: Re: [Paraview] calculate flow
Dear Paraview experts,
I completed a CFD calculations which contains, U (velocity field) and p
(pressure field).
I used extract selection to select a cross section. I then would like to
calculate the flow rate through this cross section, ie, U dot A. I tried to
use the Calculator function.
dot A.
I have also tried Surface Flow. I got two values for Surface Flow, something
like [-3.64248e-6 -3.64248e-6]. Shouldn't it be just one value?
Pei-Ying
From: David E DeMarle dave.dema...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview
dot A.
I have also tried Surface Flow. I got two values for Surface Flow, something
like [-3.64248e-6 -3.64248e-6]. Shouldn't it be just one value?
Pei-Ying
From: David E DeMarle dave.dema...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview
enough.
Is there a way to put in a delay time between each time step when saving
animation?
Pei-Ying
From: Utkarsh Ayachit utkarsh.ayac...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview paraview@paraview.org
Sent: Monday, April 16, 2012 12:43
Dear Paraview experts,
I am wondering whether there is a solution to this problem.
I have completed a transient CFD analysis. It contains a large dataset.
When I tried to saved the images of animation, Paraview crashed. Paraview
sometimes saved 50 images, sometimes saved 80 images, but,
line so it is more specific
than Re: Contents of ParaView digest...
Today's Topics:
1. paravire crashed when dumping images during saving animation
(Pei-Ying Hsieh)
2. Re: paravire crashed when dumping images during saving
animation (Utkarsh Ayachit
From: Utkarsh Ayachit utkarsh.ayac...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview@paraview.org paraview@paraview.org
Sent: Friday, April 13, 2012 11:39 AM
Subject: Re: [Paraview] paravire crashed when dumping images during saving
animation
What
Thanks a lot Robert!
I will look into GTX 560Ti. If I cannot afford it, then, I will keep the
Quadro FX4600 for the time being.
Best Regards,
Pei-Ying
From: Robert Maynard robert.mayn...@kitware.com
To: Phsieh2005 phsieh2...@yahoo.com
Cc:
Dear Paraview developers/experts,
I am wondering what the differences are between MS Windows version and Linux
version.
Using the Linux version (64 bit OS with 8 gb ram), paraview closed itself in
the middle of rendering/saving images, while, the MS Windows version was able
to complete the
Dear paraview developers/users:
I just downloaded the binary version of paraview-3.6.2 for linux 64. When I
tried to run it, I got segmentation fault.
The binary version of paraview-3.6.1 runs fine.
Any suggestion?
Thanks!
Pei
___
Powered
Hi, Dave,
Yap, that did the trick! Thanks!
Pei
From: Dave Partyka dave.part...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Sent: Tue, January 5, 2010 11:11:14 AM
Subject: Re: [Paraview] paraview-3.6.2 failed to run on OpenSUSE 11.2 64 bit
Hi Pei
: Utkarsh Ayachit utkarsh.ayac...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com
Cc: paraview paraview@paraview.org
Sent: Fri, December 18, 2009 1:02:21 PM
Subject: Re: [Paraview] particle motion animation - can someone help?
Since your csv files don't have any header column, make sure that you
Hi, Raashid,
I did search the mailing list before I posted the question.
I found some communication about practicle tracing, but, it seems that it is
not quite what I am looking for (seems more complex than what I am trying to
do). I do not quite understand what the solution was either.
I
indivisually? Is there a possibility of using vtu/pvd format (still need to
know the vtu/pvd format though)?
Pei
From: Berk Geveci berk.gev...@kitware.com
To: Pei-Ying Hsieh phsieh2...@yahoo.com; ParaView Mailing List
paraview@paraview.org
Sent: Thu
Dear ParaView experts:
I did a simple calculations of particle motion under magnetic fields using
perl. I would like to plot the particles as a function of time.
What format should I use to save for paraview to be able to read in? The
particles has attributes of: size, time, coordinate in X,
Dear PV experts:
I loaded a transient dataset into paraview (3.4.0). This is 3D unstrucutred
mesh.
Is there any tutorial that shows how to select a point using a mouse? Then,
plot that point over time?
I know how to select a whole bunch of cells (select cell through selection),
but,
variable I am ploting. I am
missing something.
Any suggestion?
Pei
From: Moreland, Kenneth kmo...@sandia.gov
To: Pei-Ying Hsieh phsieh2...@yahoo.com; paraview paraview@paraview.org
Sent: Thursday, March 19, 2009 8:32:34 AM
Subject: RE: [Paraview] plot point over
Hi, Ken,
Now I am able to plot selection over time, but, only if I select cell, not
point.
Thanks!
Pei
From: Pei-Ying Hsieh phsieh2...@yahoo.com
To: Moreland, Kenneth kmo...@sandia.gov
Cc: paraview paraview@paraview.org
Sent: Thursday, March 19, 2009 10
From: Scott, W Alan [EMAIL PROTECTED]
To: Pei-Ying Hsieh [EMAIL PROTECTED]; paraview paraview@paraview.org
Sent: Friday, November 21, 2008 11:10:52 AM
Subject: RE: [Paraview] how to change decimal places?
Pei,
Are you running ParaView 3.4? I can put in more than
2
Hi, Paraview group:
I created a cylinder in PV. I need to move it to a new location. But, default
only has 2 decimal places, but, I need it to be precise to 3 decimal places.
Is there a way to achieve this?
Thanks!
Pei
___
ParaView
Dear Paraview group:
How to search the paraview email archive?
Thanks!
Pei
___
ParaView mailing list
ParaView@paraview.org
http://www.paraview.org/mailman/listinfo/paraview
Dear Paraview group:
Some of my trensient cases took a long time to render the pictures. I have two
NVidia 8600 GTS cards. Will rendering time reduced if I install both cards on
the same workstation and run in SLI mode?
Pei
___
ParaView
50 matches
Mail list logo