Thanks again Mathieu, as you say I could run the cameras, but osx is
pixelated, probably an error or a problem with the graphics card in my mac
intel gma the infamous ... I've been working hard with the gridflow and
opencv and I greatly appreciate your work and support.
Best regards
José
2010/9
Hello.
When i compile pdp from http://zwizwa.be/pd/pdp/pdp-0.12.5.tar.gz,
i have an error :
i simply do as recommended
./configure
make
And i have this :
wi...@localhost ~/develop/pdp-0.12.5 $ ./configure
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking
On Mon, 6 Sep 2010, Jose Luis Santorcuato wrote:
Hi Mathieu, problem solved...in mac osx i cant see the pd folder... only
a executable... in the olds version of pd, pd entered a folder...now...i
decided to do everything in text mode and terminal...works well... in
linux too... but some patches
Hi Mathieu, all solved, but the path and stratup I could not do in graphical
mode, I should have text and terminal, but it works very well, do not think
is a bug, others would have noticed, but osx will not let me select the pd
folder, just as I did.
In Linux all good, I found before in osx, hehehe
Hello IOhannes,
It would be nice if [pdgst] could have the same 'function' as [switch~]
in a subpatch : you can start or stop only the stream in the subpatch
when you send the message [1 ( or [0 (to it.
Other thing :
Is there a way to stop/play the stream when you read it (as a player) ?
Last th
Hi Mathieu, problem solved...in mac osx i cant see the pd folder... only a
executable... in the olds version of pd, pd entered a folder...now...i
decided to do everything in text mode and terminal...works well... in linux
too... but some patches dont work...crashes...like motion detect... the
conso
Le mardi 07 septembre 2010 à 00:56 +0200, Jack a écrit :
> Mathieu, for information, I have 10 [#see] in an abstraction (with GOP)
> and i load 10 different pictures with a [until].
> At the beginning, i have the links but after the loading they disappear.
> Pd 0.42.5, GF 9.11, Ubuntu 10.04.
> Than
Mathieu, for information, I have 10 [#see] in an abstraction (with GOP)
and i load 10 different pictures with a [until].
At the beginning, i have the links but after the loading they disappear.
Pd 0.42.5, GF 9.11, Ubuntu 10.04.
Thanx.
++
Jack
PS : if i keep the instance of the abstraction open, i
Hmm, very strange, when i load a picture with [#in] to [#see], all the
links around [#see] disappear ! It was not the case with GF 9.10.
Do you know why ?
Thanx.
++
Jack
Le mardi 07 septembre 2010 à 00:16 +0200, Jack a écrit :
> Yes, thanx, i was in src folder.
> ++
>
> Jack
>
>
> Le lundi 0
On Fri, 3 Sep 2010, Jose Luis Santorcuato wrote:
false, the problem is: when i did the path in ubuntu i could see the pd
folder, but when i like path in osx i see a pd icon
executable...gray...i cant select the pd folder...ridiculous, any
idea???
Do you mean that you accidentally put a pd fi
On Mon, 6 Sep 2010, Jose Luis Santorcuato wrote:
Hi Mathieu... the point is that you can not path with gui on mac osx ...
That's weird. Are you running a test-version of 42 ? Is it a bug that has
been reported and fixed already ? I don't recall that one.
another question why some patch
Yes, thanx, i was in src folder.
++
Jack
Le lundi 06 septembre 2010 à 17:58 -0400, Mathieu Bouchard a écrit :
> On Mon, 6 Sep 2010, Jack wrote:
>
> >> This is the GridFlow 9.10 configurator
>
> The current version really says 9.11. You have the wrong version of
> ./configure
>
> > In file in
On Mon, 6 Sep 2010, stéfan piat wrote:
but with osX 10.5.8 I have the following error message in the pd-console
can't produce grid from pix format 34233 (0x85b9)
what does this mean ?
There's no easy way to find the name of pix formats automatically, but if
you look for a file named gl.h on y
On Mon, 6 Sep 2010, Jack wrote:
This is the GridFlow 9.10 configurator
The current version really says 9.11. You have the wrong version of
./configure
In file included from src/gridflow.cxx.fcs:22:
src/gridflow.hxx.fcs:30:26: error: bundled/m_pd.h: Aucun fichier ou
dossier de ce type
You
Le lundi 06 septembre 2010 à 15:03 -0400, Mathieu Bouchard a écrit :
> On Mon, 6 Sep 2010, Jack wrote:
> > Le lundi 06 septembre 2010 à 12:05 +0200, Jack a écrit :
> >> [#see] doesn't work everytime when you put it in a subpatch (or
> >> abstraction) with GOP and, then, click on it. I expected the
hello,
I'm using some gridflow objects to have a preview of gem
pix_film
I
#from_pix
I
#scale
I
#see
but with osX 10.5.8 I have the following error message in the pd-console
can't produce grid from pix format 34233 (0x85b9)
what does this mean ?
on ubuntu it work fine with the same video files
On Mon, 6 Sep 2010, Jack wrote:
Le lundi 06 septembre 2010 à 12:05 +0200, Jack a écrit :
[#see] doesn't work everytime when you put it in a subpatch (or
abstraction) with GOP and, then, click on it. I expected the same
behaviour when you put it in a subpatch or in the main patch. GF 9.10,
pd 0
I'm a facing another audio setting weirdness
I am now using pd-extended-0.41.4 (osx 10.5.8)
I configured the audio settings for an external sound card (m-audio fast
track pro) with 4 channels out
and it worked fine
but now, if I don't use the sound card, when I open pd the outputs channels
are se
Hi Mathieu... the point is that you can not path with gui on mac osx ...
I should make in console and editing a file in user/lib/preferences... all
the process...editing text file and console...On liux ubuntu no
problems...another question why some patchs not works
(camera)?chrashes... and ter
On Mon, 6 Sep 2010, Mathieu Bouchard wrote:
On Mon, 6 Sep 2010, Jose Luis Santorcuato wrote:
the problem is that I tried to make the path from the gui should be done
from org.puredata.pd.plist file
I don't understand. You mean you were not able to add the path using the GUI
?... Did you try fol
On Mon, 6 Sep 2010, Jose Luis Santorcuato wrote:
the problem is that I tried to make the path from the gui should be done
from org.puredata.pd.plist file
I don't understand. You mean you were not able to add the path using the
GUI ?... Did you try following the instructions ?
_
On 6 sept. 10, at 12:12, Thomas Grill wrote:
Hi Norbert,
Yes, I think the latest state of the development of FTM for Pd was
already
pretty close (since the last adaptations to Max 5 we probably took
back a
little distance).
But no, we have currently no plans to develop this further.
In fac
Here you go. I don't know if you need something more complex. This could be
a good start.
Pierre
2010/9/5 Tyler Leavitt
> Hello all,
>
> Forgive me if it is a crime to just outright ask for a patch... but I've
> been trying to make a digital delay stombox emulator with delwrite~ and
> delread~
LinkedIn
Jordi Sala requested to add you as a connection on LinkedIn:
--
Barry:
Me gustaría añadirte a mi red profesional en LinkedIn.
- Jordi Sala
Accept invitation from Jordi Sala
http://www.linkedin.com/e/-24tqmf-gdqavu8v-23/Z-E7tbU-3QZNZY
Hello all,
Forgive me if it is a crime to just outright ask for a patch... but I've
been trying to make a digital delay stombox emulator with delwrite~ and
delread~ to no avail. I've searched and apparently I want to use the vd~
object, however, I am a total n00b when it comes to digital audio and
I forgot : it happens when you open your main patch. You have to open
the subpatch (or abstraction) where you have put [#see] inside and,
then, close it to have a normal behavior (with mouse).
++
Jack
Le lundi 06 septembre 2010 à 12:05 +0200, Jack a écrit :
> [#see] doesn't work everytime when y
On 2010-09-06 12:02, Lupin3rd wrote:
> Hi at all,
> I would to have some additional infos about pix_share_write and
> pix_share_read objects... i would to know what mean "shared memory
> region", is this the video card frame buffer or the RAM?
it refers to "POSIX shared memory objects" or equivale
Hi Norbert,
> Yes, I think the latest state of the development of FTM for Pd was already
> pretty close (since the last adaptations to Max 5 we probably took back a
> little distance).
> But no, we have currently no plans to develop this further.
>
> In fact, I didn't have the impression, that Pd
Hi at all,
I would to have some additional infos about pix_share_write and
pix_share_read objects... i would to know what mean "shared memory
region", is this the video card frame buffer or the RAM?
and what mean the ID field (how many id can i use? how can i calculate
shared memory dimension and m
On Sun, 5 Sep 2010, Jack wrote:
1. [abs] just before [pow 2] is completely useless.
Wrong, that depend : float -2 -> pow 2 doesn't give 4 but 0. So [abs]
can be useful to get 4.
right. [pow] really sucks... however, [expr pow($f1,2)] does it
correctly... and so does [t a a] [*].
_
[#see] doesn't work everytime when you put it in a subpatch with GOP
and, then, click on it. I expected the same behaviour when you put it in
a subpatch or in the main patch.
++
Jack
___
Pd-list@iem.at mailing list
UNSUBSCRIBE and account-management
Hi Thomas,
On 3 sept. 10, at 13:42, Thomas Grill wrote:
Hi all,
i'd like to ask about the current state of FTM for PD.
From looking into the SVN repo it's obvious that a considerable
amount of work has already been put into it, but it doesn't compile
right away, so i'm not sure if it's still
[#see] doesn't work everytime when you put it in a subpatch (or
abstraction) with GOP
and, then, click on it. I expected the same behaviour when you put it in
a subpatch or in the main patch.
GF 9.10, pd 0.42.5, Ubuntu 10.04
++
Jack
___
Pd-list@iem.at
Hi at all,
I would to have some additional infos about pix_share_write and
pix_share_read objects... i would to know what mean "shared memory
region", is this the video card frame buffer or the RAM?
and what mean the ID field (how many id can i use? how can i calculate
shared memory dimension and m
Le dimanche 05 septembre 2010 à 13:27 -0400, Mathieu Bouchard a écrit :
> On Wed, 1 Sep 2010, Ed Kelly wrote:
>
> > But, I have noticed a sinusoidal error with the graphics in my patch.
> > So, here is the real thing!
>
> 1. [abs] just before [pow 2] is completely useless.
Wrong, that depend : f
On Tue, 24 Aug 2010, Hans-Christoph Steiner wrote:
On Aug 22, 2010, at 12:34 PM, Mathieu Bouchard wrote:
On Sat, 21 Aug 2010, Hans-Christoph Steiner wrote:
Yeah, the IEMGUI font size issues are still very present. I think the
best way forward is to write a new GUI lib, the IEMGUI code is real
On Sep 5, 2010, at 5:16 PM, Mathieu Bouchard wrote:
On Tue, 24 Aug 2010, Hans-Christoph Steiner wrote:
On Aug 22, 2010, at 12:34 PM, Mathieu Bouchard wrote:
On Sat, 21 Aug 2010, Hans-Christoph Steiner wrote:
Yeah, the IEMGUI font size issues are still very present. I
think the best way fo
On Wed, 1 Sep 2010, Frank Barknecht wrote:
On Tue, Aug 31, 2010 at 07:44:57PM -0700, Tom Erbe wrote:
We have just released the first complete version of the SoundHack
externals for PD & Max.
This package is available (free) at http://www.soundhack.com/externs.php
Thanks for making these avaiabl
I agree - that would be fun. It would make them all a bit more CPU
intensive though. In the meantime, you could sample a re-ranged
oscillator at control rate and send that into +decimate~'s folds
inlet, e.g:
[osc~ 0.25]
|
[*~ 3]
|
[+~ 4]
|
|[bang~]
|/
[snapshot~]
Not the perfectly smooth contro
On Tue, 31 Aug 2010, ronni montoya wrote:
But not mapping the values from the functions into sound parameters, but
instead using the resulting values for generating waveforms.
What's the difference ?... I don't get the difference. What's a « sound
parameter » ?
Do anybody have tried somethi
Friends, I've done, installing on mac osx 10.5.8 gridflow and the latest
official version of Pure Data, I did well in Ubuntu Linux ... the problem is
that I tried to make the path from the gui should be done from
org.puredata.pd.plist file and then copy the files and create the folder PD
...then co
Of course... work very nice in Linux and Mac osx...hehehehe
Best regards
José
2010/9/6 Jose Luis Santorcuato
>
> Friends, I've done, installing on mac osx 10.5.8 gridflow and the latest
> official version of Pure Data, I did well in Ubuntu Linux ... the problem
> is that I tried to make the
42 matches
Mail list logo