"Each year, we build, operate, and burn a van-sized walk-in pinhole
camera/darkroom..."
http://www.pinholecamp.org/
Those crazy Burning Man kids.. Anybody going this year? Wish I was..
Liav K.
That's interesting: my first two tries were to just pull off the
lens/shutter and leave the advancer in place. I had a lot of problems with
that setup. I usually found that once I pulled off the back plate, when I
reassembled the camera the film wouldn't say engaged in the sprockets.
Also, it was a
Ilford includes wedge spectrograms for all their film and paper in their
data sheets. The only one I have at hand right now is for RC warmtone: the
range is about 350 - 550 nm, w. a sharp maximum at about 525. You can get
.pdfs from their other products on their website.
Liav K.
>Subject: Re: [
On Wed, 1 May 2002 Guy Glorieux wrote:
> I built one on pinhole day. I'll let you know as soon as I have
> processed the film.
>
> I pierced a slot on one edge to install a 35mm cartridge and another on
> the opposite edge to install a take up cartridge. Installed a pinhole
> on top (.025mm), pa
This isn't really a pinhole question; sorry. I'm looking around for a
darkroom to work in over the summer, until school starts again. Does
anyone have any recommendations for commercial darkrooms in Toronto (ie,
a place where I can go in and print, not a place that will print for me).
I'm in North
From: "Bill Erickson" :
> it. My impression is that a lot of the pinholers here use converted lens
> cameras or the Zero series. Next favorite is the curved film plane ones,
> with the oatmeal carton being the prototype. Figuring out what you
> yourself like is half the fun.
This makes me wonder:
> Hi all. I'm a newbie to the list and to pinhole but I've been eagerly
> reading the posts and picking up a few pointers. However, I have a
> basic question. I've made some pinhole cameras and taken some film
> pictures with each. Now I'm wanting to use some photo paper instead. I
> bought so
e any
recommendations for better contrast, other then push development?
-Liav Koren.
