Oh yes where are you located. The reason I have so little wind is the
topography,
I am down NE of a ridge about 100 ft with tall trees all around and there
are
ridges to the north of me that run quite a bit higher so I get little wind
down here.
It can be blowing a gale at treetop level and I get
I will have to give that a try. I am about fed up with WU, the acurite does
not
send wind direction data (at least from the console) when there is no wind
speed, WU then pushes you down as their stupid interface considers your
station "broke" because it does not show wind direction when there is
On 12/30/2016 08:32 AM, Chuck Hast wrote:
> That is interesting, I have two of them, one I use for demo's and to setup
> for
> data captures in places where I might want a bit of data on a location, and
> the
> other is just here at the house. The demo one lost the console the other
> day,
> and I
That is interesting, I have two of them, one I use for demo's and to setup
for
data captures in places where I might want a bit of data on a location, and
the
other is just here at the house. The demo one lost the console the other
day,
and I am trying to figure out what did it perhaps it was too
On 2016-12-29 21:06, Chuck Hast wrote:
> I use something called WeeWx, www.weewx.com for grabbing WX data off
> of sensors, it is written in python and in fact the fellow that wrote
> it I
> believe
> lives in the gorge somewhere.
>
> James are you using WeeWX?
>
> My station data can be seen
I use something called WeeWx, www.weewx.com for grabbing WX data off
of sensors, it is written in python and in fact the fellow that wrote it I
believe
lives in the gorge somewhere.
James are you using WeeWX?
My station data can be seen on WU, APRS and CWOP.
It can capture data from a whole
On 2016-12-29 19:26, Michael C. Robinson wrote:
> I'm trying to use it with my shiny new Raspberry Pi 3 2016 model B.
> I'm running Debian Jessie, but it's called Raspbian. Does anyone
> know if a different driver is available for version 25.6
> of the thermometer? There is version 1.4, a driver
I'm trying to use it with my shiny new Raspberry Pi 3 2016 model B.
I'm running Debian Jessie, but it's called Raspbian. Does anyone
know if a different driver is available for version 25.6
of the thermometer? There is version 1.4, a driver exists for
that. Unfortunately, there are so many
