Also possibly helpful explanation here:
https://en.wikipedia.org/wiki/Switching_loop
Probably the best way to demonstrate this would be with a >=4 port
unmanaged switch with two client devices and a loop:
Aport1 port2port3 port4B
where A and B are client devices and are ethe
On Fri, 20 Dec 2019 14:54, Keith Lofstrom wrote:
My first encounter with gnome3 was disturbing - way too much eye candy
and gesture dependence and memory footprint. So, I stayed with older
gnome2-using distros, but support for those is vanishing.
I plan to use gnome2-emulating Mate with newer
The router/switch looks this way:
- WAN (eth0)
+- LAN1 (eth1)
+- LAN2 (eth2)
+- WLAN3 (wlan0)
The easiest way is to get an old hub / bridge from Free Geek, Goodwill, etc
> for a $1 and connect it via to Eth1 & Eth2 of the sw/rtr. Viola you have a
> LAN loop!
>
I suspect the Openwrt sw
On Sun, 17 Nov 2019 16:35, Galen Seitz wrote:
On 11/16/19 5:15 PM, Galen Seitz wrote:
I have a need to add annotations to some photos. Text, lines with
arrows, and circles or elipses is about all I need. In the past I've
used imagemagick or xfig for this. They work, but I wouldn't describe
On Sat, 16 Nov 2019 13:13, logical american wrote:
I just recently found out that my Signal Messaging Application on my
Apple Iphone has been compromised.
Yikes! Sorry I missed this earlier. This is very concerning. Could you
please elaborate? How did you detect this? What happened to the
On Tue, Dec 24, 2019 at 7:55 AM Tomas Kuchta
wrote:
> Christmas is slow, so I made an exception and read carefully Russell's lan
> loop warning post.
>
> Now, I have conscious, not unconscious (double negative warning to true
> English speakers), desire to try to create and observe lan loops in a
Christmas is slow, so I made an exception and read carefully Russell's lan
loop warning post.
Now, I have conscious, not unconscious (double negative warning to true
English speakers), desire to try to create and observe lan loops in action
for the first time.
The problem I am seeking help with,
Also, the ports on the ER-X are gigabit as well, so practically speaking,
assuming the switch is connected to one of the ER-X LAN ports, you can
connect to either. It might be super-marginally better to connect to one or
another to reduce contention or switch hops somewhere (which will depend on
wh
Where is the switch in your network? I don't recall seeing that detail.
On Sun, Dec 22, 2019 at 1:09 PM Rich Shepard
wrote:
> On Sun, 22 Dec 2019, wes wrote:
>
> > The phrasing here is not as clear as it could be. It sounds like you're
> > referring to the two connections as if they are totally
