On Thu, May 16, 2013 at 08:23:56PM +0200, Martin Natano wrote:
> Hi!
>
> While browsing openports.se I found some ports whose homepage is down.
> So I wrote a script to check the whole ports tree.
> Below is a list of the broken homepages I found.
>
> regards,
> natano
I bet your script is eithe
On Fri, May 31, 2013 at 09:36:43PM +, Christian Weisgerber wrote:
> +# $OpenBSD: README,v 1.5 2013/04/07 20:07:24 naddy Exp $
> +#
> +# +---
> +# | Running ${FULLPKGNAME} on OpenBSD
> +# +--
Hi,
during working on Scribus update I discovered that if
in /usr/local/share/hunspell there are files/symlinks to dictionaries
of mozilla-dicts (like cs.aff), then these dictionaries are
automatically discovered by some apps, like Scribus.
lrwxr-xr-x 1 root wheel 37 Aug 8 22:35 czech.aff@ ->
On Tue, Aug 13, 2013 at 01:04:30AM +0200, Stefan Sperling wrote:
> A port of retroshare (http://retroshare.sourceforge.net/) is attached.
>
> RetroShare is a Open Source cross-platform, Friend-2-Friend and secure
> decentralised communication platform. It lets you to securely chat and
> sha
On Wed, Aug 14, 2013 at 03:06:32PM +0200, Stefan Sperling wrote:
> Should we hold back this update until bitlbee and mcabber provide
> patches for OTR-4? Or leave them broken until then? Or should I
> add a new libotr4 port instead that conflicts with otr3?
Please do not break bitlbee-otr, I use i
On Tue, Sep 24, 2013 at 08:25:26PM +0200, Antoine Jacoutot wrote:
> Hi.
>
> It's that time of the year again...
> Jasper and I are currently working on updating GNOME to 3.10.
> We will keep the build breakage to a minimum during the update window -- we
> expect to start sometimes within the next
On Wed, Sep 25, 2013 at 09:03:48AM +0200, Antoine Jacoutot wrote:
> On Tue, Sep 24, 2013 at 05:42:37PM -0400, Jiri B wrote:
> > I see you have similar libreoffice UI issues during startup and
> > on the main page. Any idea what is causing it? It's even worse
>
> No idea
Hi,
in order to update ruby-jekyll there's need to update
ruby-redcarpet and ruby-liquid.
I'm *only* occassional user of jekyll, thus no real testing
of redcarpet and liquid. But jekyll works :-)
I have to patch jekyll metadata file as gem was screaming
that redcarpet 3.0.0 is not higher than 2.
Nobody likes Dr. Jekyll? No Mr. Hyde here? :)
j.
On Sat, Sep 28, 2013 at 05:47:07PM -0400, Jiri B wrote:
> Hi,
>
> in order to update ruby-jekyll there's need to update
> ruby-redcarpet and ruby-liquid.
>
> I'm *only* occassional user of jekyll, thus no real testi
On Tue, Oct 01, 2013 at 12:43:17PM -0700, Jeremy Evans wrote:
> > I have to patch jekyll metadata file as gem was screaming
> > that redcarpet 3.0.0 is not higher than 2.3.0.
> >
> >
> This change is not kosher. The gem spec is for ~>2.3.0, meaning
> >=2.3.0,<2.4.0. You shouldn't be jumping redca
On Mon, Oct 21, 2013 at 11:54:46AM +0200, Sebastian Reitenbach wrote:
> Hi,
>
>
> attached a tarball of OpenGroupware 5.5 rc2 release.
>
> cat pkg/DESCR:
> OpenGroupware is a full-featured groupware system developed in
> Objective-C on SOPE using a WebObject paradigm. Besides the standard
> grou
I see mongodb is broken since rthread switch. Does anybody
have it working or does work on it?
jirib
Hi,
does anybody have in his/her repo newer rpm? I see there's
newer rpm in pkgsrc than in OpenBSD ports...
Or... do you create yum repos on OpenBSD? If so how do you
do that? Having newer rpm from Fedora under compat_linux
and obviously createrepo as well?
jirib
On Mon, Nov 04, 2013 at 11:32:50AM +0100, Dmitrij D. Czarkoff wrote:
> > We could have some framework for such apps (and for things like CPAN,
> > RubyGems and so on) to offload maintaince burden for us, though...
>
> Actually, I'd love to see the ports in question in until there is such
> framew
On Mon, Nov 04, 2013 at 11:54:26AM +0100, Antoine Jacoutot wrote:
> On Mon, Nov 04, 2013 at 05:46:59AM -0500, Jiri B wrote:
> > On Mon, Nov 04, 2013 at 11:32:50AM +0100, Dmitrij D. Czarkoff wrote:
> > > > We could have some framework for such apps (and for things like CPAN,
&g
On Tue, Nov 12, 2013 at 03:49:35PM +, Stuart Henderson wrote:
> > > On 13-11-11 07:06 PM, Stuart Henderson wrote:
> > > >Help identify which ports currently rely on Apache from base, work out
> > > >which ones can use nginx and move them across (updating READMEs etc where
> > > >necessary), whi
On Wed, Nov 13, 2013 at 07:50:11AM +0400, Kirill Bychkov wrote:
> On Wed, November 13, 2013 00:10, Stuart Henderson wrote:
> > On 2013/11/12 22:35, Kirill Bychkov wrote:
> >> On Tue, November 12, 2013 19:49, Stuart Henderson wrote:
> >> >> > On 13-11-11 07:06 PM, Stuart Henderson wrote:
> >> >> > >
On Sun, Nov 17, 2013 at 05:15:06AM +0100, frantisek holop wrote:
> hmm, on Sat, Nov 16, 2013 at 11:57:51PM +, Federico Schwindt said that
> > this has been discussed before and unless it has changed recently the
> > problem remains. please check the ports archive.
>
> i did do a quick google b
On Wed, Nov 27, 2013 at 12:10:03AM -0500, Brad Smith wrote:
> Here is an update to QEMU 1.7.0-rc2. Looking for any testing.
>
>
> Index: Makefile
> ===
> RCS file: /home/cvs/ports/emulators/qemu/Makefile,v
> retrieving revision 1.111
On Sun, Dec 01, 2013 at 06:35:24AM -0500, Jiri B wrote:
> [...complains about 3 yrs old source...]
I was using old source (v1.0.0). With todays git version it fails here:
-%-
# gmake bin/undionly.kpxe
[BIN] bin/undionly.kpxe.bin
[ZINFO] bin/undionly.kpxe.zinfo
[ZBIN]
On Mon, Dec 02, 2013 at 04:46:58PM +, Stuart Henderson wrote:
> On 2013/12/02 09:59, Jiri B wrote:
> > On Sun, Dec 01, 2013 at 06:35:24AM -0500, Jiri B wrote:
> > > [...complains about 3 yrs old source...]
>
> This 06:35 mail didn't make it through, and the 09:59
Oops, forgotten attachment :)
> Till now OK, in attachment there's my WIP port.
jirib
ipxe.tar.gz
Description: application/tar-gz
Hi,
oVirt is a OSS alternative to VMWare vSphere. It is also
upstream for RHEV setup.
Slightly tested against RHEV-M 3.1.x.
https://github.com/jirib/openbsd-mystuff/tree/master/devel/py-ply
https://github.com/jirib/openbsd-mystuff/tree/master/sysutils/py-ovirt-engine
I got info spicec is deprec
On Fri, Nov 16, 2012 at 01:55:59PM +, Stuart Henderson wrote:
> OK to import this?
>
> The YubiKey Personalization Tool is a Qt based Cross-Platform utility
> designed to facilitate re-configuration of YubiKeys on Windows, Linux
> and MAC platforms. The tool provides a same simple step-by-step
On Sun, Nov 18, 2012 at 11:10:25AM +, Stuart Henderson wrote:
> It needs the newer version of ykpers, I'll tighten LIB_DEPENDS to help people
> building it themselves.
Thank you. Works fine, tested on amd64 with static password and
deleting configuration.
jirib
On Sat, Nov 24, 2012 at 12:04:23PM +, Stuart Henderson wrote:
> On 2012/11/16 13:55, Stuart Henderson wrote:
> > OK to import this?
>
> anyone? it works nicely :)
Yes please :)
jirib
Hi,
as more and more of us is using nginx, wouldn't be nice
to start to have a "way" to include easily sample configs
of our www apps into nginx?
I would imagine similar thing which is done with PHP extensions.
/etc/nginx/include/drupal7.conf ->
/var/www/etc/nginx/include-sample/drupal7
On Tue, Dec 04, 2012 at 08:34:18PM -0500, Brad Smith wrote:
> Here is an update to QEMU 1.3.0.
>
> I am looking for some testing of this update with some of the
> more unusual configurations I'm sure people have cooked up
> out there. I personally do not use the tap mode setup and
> Stuart mention
On Wed, Dec 05, 2012 at 03:50:01AM -0500, Brad Smith wrote:
> On Wed, Dec 05, 2012 at 03:44:11AM -0500, Jiri B wrote:
> > On Tue, Dec 04, 2012 at 08:34:18PM -0500, Brad Smith wrote:
> > > Here is an update to QEMU 1.3.0.
> > >
> > > I am looking for some tes
Hi,
I tried to make IPXE running on OpenBSD and got this reply from
IPXE guy asking for binutils version - huh, how to check it?
My OpenBSD install was some last November snapshot for amd64.
If anybody would have a tip where could be problem a help is
appreciated.
Original mail to IPXE list:
On Fri, Dec 14, 2012 at 10:11:20PM -0600, Maximo Pech wrote:
> Why not use something like gnu screen or tmux (if it offers the log session
> funcionality)?
Because it is under controle or the user and he/she can disable
such funcionality.
jirib
On Thu, Dec 20, 2012 at 07:48:18PM -0700, Anthony J. Bentley wrote:
> > Tested on amd64. Everything seems to work except generating executables
> > for Win/Mac/Linux. (To test, run /usr/local/share/renpy/renpy.py.)
^^^ what? It would be in PATH,
or make a wrapper.
Hello,
any comments are welcome, I'm not really jboss user, just
need it for other app.
I didn't want to hardcore variables in rcscript like in Openfire
port, so there's little crazy kung-fu to allow users to override
some parameters in daemon_flags (different needs, other instance...).
Also her
Hi,
I discovered that my var - JBOSS_ROOT - is not substitued
in (for example) this file below.
$ grep JBOSS_ROOT
/data/pobj/jboss-as-7.1.1/fake-amd64/usr/local/jboss-as/bin/standalone.sh
RUN_CONF="${JBOSS_ROOT}/standalone/configuration/standalone.conf"
^ - after fa
On Wed, Jan 09, 2013 at 12:09:53PM +, Stuart Henderson wrote:
> > Although it is defined in Makefile to be substitued.
> >
> > $ grep JBOSS_ROOT Makefile
> > JBOSS_ROOT =/var/jboss-as
> > SUBST_VARS += JBOSS_ROOT JBOSS_LOG_ROOT
>
> You need to use ${SUBST_CMD}.
Yes, thank you!
jirib
Hi,
I was surprised that dsocks puts in ${LOCALBASE}/bin/dsocks.sh.
Although it is shell script (wrapper) I tend to think that
in PATH should be only filenames not having extentions.
One argument could be, you can decide to switch language
and not to rename the file...
Do you really like this - *
I wanted to start using python bindings for Selenium web apps
testing server..., but their source includes Linux library
only.
So I'm trying to build it on OpenBSD. Anybody would like to
give a hand?
The port Makefile is here:
https://github.com/jirib/openbsd-mystuff/blob/master/devel/py-se
On Thu, Jan 10, 2013 at 09:14:56PM +0100, Jérémie Courrèges-Anglas wrote:
> jca+o...@wxcvbn.org (Jérémie Courrèges-Anglas) writes:
> > Use -I${LOCALBASE}/include and change your perl -pie to
> > 's,elf.h,libelflibelf.h,'
>
> sorry: 's,elf.h,libelf/libelf.h,'
OK, so here it is, still
jirib
{
Hi,
RHEVM/oVirt tools on OpenBSD :D
tools: https://github.com/jirib/openbsd-mystuff/tree/master/sysutils/rhevm
python sdk:
https://github.com/jirib/openbsd-mystuff/tree/master/devel/py-rhevm-sdk
ovirt-engine tools:
https://github.com/jirib/openbsd-mystuff/tree/master/sysutils/ovirt-engine
pyth
On Thu, Jan 10, 2013 at 11:38:57PM +, Federico Schwindt wrote:
> > The port Makefile is here:
> >
> >
> > https://github.com/jirib/openbsd-mystuff/blob/master/devel/py-selenium/Makefile
>
> I started writing a port but I found a bug (which I reported upstream)
> and I didn't get back to i
On Fri, Jan 11, 2013 at 12:46:27PM +0100, Peter Hessler wrote:
> On 2013 Jan 11 (Fri) at 06:04:02 -0500 (-0500), Jiri B wrote:
> :tools: https://github.com/jirib/openbsd-mystuff/tree/master/sysutils/rhevm
> :python sdk:
> https://github.com/jirib/openbsd-mystuff/tree/master/devel/
New tarballs...
Ooops, older tarballs were somehow broken. These ones
are OK, WANTLIB extra repaired and other mistakes too.
There are also included previously missing python deps,
devel/py-ply and devel/py-kitchen.
jirib
devel_py_kitchen.tar.gz
Description: application/tar-gz
devel_py_ovirt_
Hello,
first of all, I don't know programming in C/C++.
Anyway, spice-xpi is falling because difference in setpgrp,
OpenBSD uses BSD instead POSIX.1 version.
c++ -DHAVE_CONFIG_H -I. -I../../.. -I/usr/local/xulrunner1.9/include
-I/usr/local/xulrunner1.9/include/dom -I/usr/local/xulrunner1.9/incl
Anybody working on samba4 port? Would it have native
kerberos support?
jirib
Just removing annoying linuxism...
jirib
Index: patches/patch-vpnc-script_in
===
RCS file: /cvs/ports/security/vpnc/patches/patch-vpnc-script_in,v
retrieving revision 1.1
diff -u -p -r1.1 patch-vpnc-script_in
--- patches/patch-vpnc-s
Hi,
I've seen a lot of logging of Tor:
Feb 6 22:29:25 host Tor[27874]: We weren't able to find support for
all of the TLS ciphersuites that we wanted to advertise. This won't
hurt security, but it might make your Tor (if run as a client) more
easy for censors to block.
Feb 6 22:29:25 host Tor[278
On Tue, Feb 19, 2013 at 03:18:40PM -0500, circuit6engineering wrote:
> I'm going to tinker with [werc][1] under chroot'ed Apache.
>
> [1]: http://werc.cat-v.org/
>
> werc requires plan9port. If I attempt to build plan9port with:
>
> make LOCALBASE=/var/www
> ...
> ===> Extracting for plan9port-
On Wed, Feb 20, 2013 at 01:04:52AM -0600, patric conant wrote:
> I'm on the fence, I use wine on my freebsd box, but I really detest both,
> but some stuff works ... how would cider donations work, just anonymous
> paypal?
Donate to yourself and install real Windows with RDP.
jirib
On Sat, Mar 09, 2013 at 08:22:09PM +0100, Martijn Rijkeboer wrote:
> Hi,
>
> A few days before ports was locked I have submitted the attached update for
> Cfengine. Since ports is currently no longer locked, any change of getting
> this committed?
I haven't tested it, just reading that port.
If
On Tue, Mar 12, 2013 at 08:57:46AM +, Stuart Henderson wrote:
> > Change PREFIX to /var/cfengine, too.
>
> This isn't a good match with hier(7) :-
>
> /var/ Multi-purpose log, temporary, transient, and spool files.
This above is not fully true, we have unbound in /var/unbound,
tomc
On Tue, Mar 12, 2013 at 11:14:27AM +, Stuart Henderson wrote:
> > And last one... This location is what upstream "supports".
>
> I'm not saying it's impossible to put it there, but it would need a
> good reason to break with the standard. As the port stands the "no
> dependence on /usr/local"
If libvirt is installed, it is building with libvirt. I think
you have to explicetly put this into Makefile. I vote for
libvirt dependency, one can like to manage KVM via remote libvirtd
from OpenBSD (I would like to try it at least, hehe).
jirib
Hi,
I'm curious how to suppress 'Error deleting directory' warnings?
It is quite obvious if I put @extraunexec rm -rf $path and it is
show to user that something is still in the paths...
But @extraunexec does not know about commant, it just declares
command to be run.
What about to change @extra
On Sun, Mar 17, 2013 at 08:12:49AM +0100, Antoine Jacoutot wrote:
> On Sat, Mar 16, 2013 at 08:47:51PM -0400, Jiri B wrote:
> > Hi,
> >
> > I'm curious how to suppress 'Error deleting directory' warnings?
> > It is quite obvious if I put @extraunexec rm
On Mon, Mar 18, 2013 at 09:33:55AM -0500, Todd T. Fries wrote:
> As I pointed out to the libvirt maintainer, libvirt should be enabled to use
> the qemu engine that does work on OpenBSD.
>
> Sure it is slower than real hardware, and because of this it makes little
> sense
> to use for more than t
Updated to 3.4.4...
@sample files based on NetBSD port, mandatory is promises.cf,
failsafe.cf if promises.cf not found. promises.cf tries to
load other files... This is OK for local agent.
1 @sample ${CFENGINE_BASE}/
2 @sample ${CFENGINE_BASE}/masterfiles/
3 @sample ${SYSCONFDIR
On Tue, Mar 19, 2013 at 11:46:06AM +, Stuart Henderson wrote:
> > > | Edit login.conf
> > > | ===
> > > |
> > > | Consider bumping the openfiles-cur to at least 256 in login.conf(5) for
> > > | the daemon class.
> > >
> > > I don't know cfengine at all but if this is for something r
On Sat, Mar 23, 2013 at 09:44:09PM +0100, Martijn Rijkeboer wrote:
> Please commit so other people can start testing it.
It does not even build because of libpromises mentioned by Stuart.
--- src/Makefile.in.origSat Mar 23 22:22:13 2013
+++ src/Makefile.in Sat Mar 23 22:22:28 2013
@@
On Mon, Apr 08, 2013 at 10:51:55PM +0100, Stuart Henderson wrote:
> These ports provide a framework to provide ICAP services, and modules
> using this framework to provide virus scanning (via libclamav) and
> url filtering.
>
> ICAP is a standard protocol used by web proxies (including squid 3)
>
Simple diff, looks working OK on amd64, tested with
couple of my n00b documents.
Index: Makefile
===
RCS file: /cvs/ports/print/scribus/Makefile,v
retrieving revision 1.48
diff -u -p -r1.48 Makefile
--- Makefile11 Mar 2013 23:04:3
Nobody?
On Sun, Apr 14, 2013 at 05:05:27PM -0400, Jiri B wrote:
> Simple diff, looks working OK on amd64, tested with
> couple of my n00b documents.
>
> Index: Makefile
> ===
> RCS file: /cvs/ports/print/
On Wed, May 01, 2013 at 08:40:22PM +0200, Martijn Rijkeboer wrote:
>
> > Trying to work through the tutorial with this and I'm a bit confused
> > about where files are being installed. This isn't helped by the tutorials
> > seeming to be for older versions (we can't really do much about that),
> >
On Wed, May 01, 2013 at 09:25:55PM +0100, Stuart Henderson wrote:
> > Please let it be commited, only if it would be in the ports tree
> > more people using OpenBSD could help and test.
>
> I am working on it.
Thank you everybody, it's in now ;)
Just for the record, cfengine does not provide any
Hi,
I would like to use elasticsearch soon so can you
book '729' userid for _elasticsearch please?
Index: user.list
===
RCS file: /cvs/ports/infrastructure/db/user.list,v
retrieving revision 1.221
diff -u -p -r1.221 user.list
--- use
Hi,
could you please:
* have a look at port as itself
* (if you have a scanner) to test it?
pysane is needed as deps for ocrfeeder, which
I'm working on. We don't have any OCR gui in
our ports :(
jirib
pysane.tar.gz
Description: application/tar-gz
Hi all,
I've thought it would be not so difficult to make ocrfeeder
(port[1]) running on OpenBSD but... Well, it core dumps.
I would appreciate any help, as it seems to be one of
few OSS OCR application available.
I submitted a BZ[2] for upstream but I'm not even sure
if it is an OpenBSD issue o
On Wed, Jan 01, 2014 at 03:48:10PM -0500, Jiri B wrote:
> Hi all,
>
> I've thought it would be not so difficult to make ocrfeeder
> (port[1]) running on OpenBSD but... Well, it core dumps.
WIP ocrfeeder port and its (new) deps in attachment.
jirib
ocrfeeder.tar.gz
Description
Hi,
I see 'qemu-ga' is built for OpenBSD qemu port but this
should be separate package from "main" qemu, as it is
installed inside qemu VMs.
I'm just playing with QGA on RHEL (not big success yet)
and I would like to try it on OpenBSD as well. QGA allows
to run some QMP commands and open/read/wri
On Thu, Jan 09, 2014 at 08:01:55AM -0500, Jiri B wrote:
> Hi,
>
> I see 'qemu-ga' is built for OpenBSD qemu port but this
> should be separate package from "main" qemu, as it is
> installed inside qemu VMs.
>
> I'm just playing with QGA on RHEL (not
On Wed, Jan 08, 2014 at 12:01:47PM +, Stuart Henderson wrote:
> GRUB is currently broken by the change to PIE by default on i386.
> (it is currently only built on i386; in theory building on amd64
> should also be possible but it's more complicated than, say,
> memtest86+).
>
> Is there anyone
On Wed, Jan 15, 2014 at 01:38:30PM +0100, Sébastien Marie wrote:
> Hi,
>
> Short story: the latest package snapshost (i386) is signed with
> 55pkg.pub, but the @signer in +CONTENTS is 54pkg.
Didn't you just forget to upgrade you base OS? 5.5 was tagged
couple of day ago.
jirib
Hi,
squid doesn't like OpenBSD specific syntax on resolv.conf.
# squid -N -d 3
...
2014/01/26 17:58:51| DNS Socket created at [::], FD 5
2014/01/26 17:58:51| DNS Socket created at 0.0.0.0, FD 6
2014/01/26 17:58:51| Adding domain example.com from /etc/resolv.conf
2014/01/26 17:58:51| Adding namese
conf.tail. Hmmm, squid does not seem to support
custom dns port anyway via a config option.
> Or are you saying that there is a snort friendly syntax for this purpose
> that we should be using instead?
I don't understand the question.
> On 27 Jan 2014 06:06, "Jiri B" wrote:
On Mon, Jan 27, 2014 at 08:41:29AM +1300, Kenneth Westerback wrote:
> On 27 January 2014 08:32, Jiri B wrote:
> > On Mon, Jan 27, 2014 at 08:09:20AM +1300, Kenneth Westerback wrote:
> >> Dhclient will not generate such syntax in resolved.conf so I assume you are
> >> do
Hi,
some mozilla-dicts are quite old, they are kept on
Stuart's mirror and other OS/distros use hunspell/myspell
"site" for getting dicts and naming the packages.
I checked pkgsrc and they have dicts as hunspell-$lang,
getting them from OO.org site (thus no need for mirror),
some of dicts are new
I'm not native English speaker so I'm not sure I do
understand meaning correctly or if the wording is
OK...
NOTE: sudo calls closefrom(2). In order to have more than one
fd passed tap interface, a line to sudoers akin to:
Defaults closefrom_override
then cal
On Mon, Feb 03, 2014 at 11:08:18PM +, Stuart Henderson wrote:
> On 2014/02/03 17:39, Jiri B wrote:
> > I'm not native English speaker so I'm not sure I do
> > understand meaning correctly or if the wording is
> > OK...
> >
> >NOTE: sudo calls cl
Hi,
remote-viewer when used with a SPICE VM has started to
core dump recently. I haven't seen this behavior on Tuesday
Feb 4th 2014, when I used it for last time. I did packages
update on Thursday 6th.
virt-viewer-0.5.7
kern.version=OpenBSD 5.5-beta (GENERIC.MP) #279: Fri Jan 24 11:50:37 MST 2014
On Fri, Feb 07, 2014 at 10:33:44AM +, Stuart Henderson wrote:
> On 2014/02/07 05:02, Jiri B wrote:
> > #0 0x0c7ec6e8c01b in ?? ()
>
> Please build the directly relevant ports with debug symbols (make clean=all;
> make repackage reinstall DEBUG="-O0 -g"), I
On Fri, Feb 07, 2014 at 05:38:58AM -0500, Jiri B wrote:
> On Fri, Feb 07, 2014 at 10:33:44AM +, Stuart Henderson wrote:
> > On 2014/02/07 05:02, Jiri B wrote:
> > > #0 0x0c7ec6e8c01b in ?? ()
> >
> > Please build the directly relevant ports with debug sym
On Fri, Mar 28, 2014 at 08:07:02AM -0500, Amit Kulkarni wrote:
> Hi all,
>
> I want to do video chatting. Is there a app which works on OpenBSD? If not,
> what needs to be ported to be able to make it work?
>
> thanks
Empathy for one-to-one? bigbluebutton for groups?
j.
On Tue, May 13, 2014 at 10:37:50PM +0100, Kaashif Hymabaccus wrote:
>[...]
> +share/doc/stow/manual-single.html
> +share/doc/stow/manual-split/
> +share/doc/stow/manual-split/Bootstrapping.html
> +share/doc/stow/manual-split/Compile_002dtime-vs-Install_002dtime.html
> +share/doc/stow/manual-split/C
On Wed, May 14, 2014 at 08:45:07AM +0100, Stuart Henderson wrote:
> On 2014/05/14 03:02, Jiri B wrote:
> > Hi,
> >
> > I wanted to use subtitleeditor and it core dumps when ones
> > tries to generate 'Generate Keyframes from video' (Keyframes in menu).
>
On Wed, May 14, 2014 at 03:32:44PM +0200, Antoine Jacoutot wrote:
> On Tue, May 13, 2014 at 12:02:15PM -0400, Jiri B wrote:
> > Hi,
> >
> > I wanted to use subtitleeditor and it core dumps when ones
> > tries to generate 'Generate Keyframes from video' (
On Thu, May 29, 2014 at 01:44:35PM +0100, Kaashif Hymabaccus wrote:
> I've searched the internet for screen sharing programs (like Teamviewer,
> for example) that work on OpenBSD and haven't found anything. All of the
> web-based solutions require a download of some proprietary plugin
> (join.me, G
Hi,
I got wpa_supplicant core dump. Strange is it is not always
reproducible, it core dumps mostly but sometimes it does not.
j.
# wpa_supplicant -c /etc/wpa_supplicant.conf -D openbsd -i iwn0 -d
...
EAP-PEAP: received 53 bytes encrypted data for Phase 2
EAP-PEAP: Decrypted Phase 2 EAP - hexdump
On Mon, Jun 09, 2014 at 09:12:17AM +, virglevirgle wrote:
> hi OpenBSD! I am your user. Thanks for your OpenBSD System. I want to setup a
> software.
>
> it's called wine. But I don't konw how to install it. I only want to use it
> on OpenBSD System.
>
> so I want run Win32 application on O
On Sun, Jun 15, 2014 at 10:42:10AM -0700, Peter Ezetta wrote:
> Hello ports@
>
> I have had to patch Ganglia 1.6.0 in order to get it to build on OpenBSD
> 5.5 and it was suggusted in IRC that I submit a port so that others may
> benefit from my work. Before I do, I wanted to check with this list
easy diff, let's first update our 3.4.5 version
before trying to update to 3.6.0.
j.
Index: Makefile
===
RCS file: /cvs/ports/sysutils/cfengine/Makefile,v
retrieving revision 1.44
diff -u -p -r1.44 Makefile
--- Makefile20 Sep 201
On Thu, Jun 19, 2014 at 02:16:30PM -0300, Rodrigo Mosconi wrote:
> CFEngine can be compiled with qdbm, tokyo cabinet or lmdb. Currently, OBSD
> only includes qdbm on port, and OBSD`s CFEngine is complied with qdbm.
> There is someone already working to include Tokyo Cabinet or lmdb into
> ports?
On Thu, Jun 19, 2014 at 08:21:11PM -0700, Craig Paulette wrote:
>
> Hello,
>
> I'm relatively new to OpenBSD (6+ months and two CD sets) -- love it.
> I'm attempting to do some web development on OpenBSD but can't get
> py-selenium to work. This thread shows that I'm not alone:
> http://openbsd.
On Fri, Jun 20, 2014 at 02:03:37PM +0200, Gregor Best wrote:
> Hi Sylvestre,
>
> I've noticed that sysutils/sshfs-fuse does not seem to accept all
> options advertised in the manpage and available on e.g. Linux. The most
> notable example is -p, which sets the target SSH port. I have a machine
> w
On Sat, Jun 21, 2014 at 03:52:39PM -0300, Rodrigo Mosconi wrote:
> 2014-06-19 15:18 GMT-03:00 Jiri B :
> > First you should try to compile 3.6.0 ;) They were some issues
> > which should be solved soon. I hope static compilation would
> > be solved as well soon.
>
> w
On Tue, Jun 23, 2015 at 04:23:23PM +0200, Martin Pieuchot wrote:
> > [..]
> > Is this a good candidate for tracking their github repo?
>
> You can use the diff below if you want. But I'd prefer to stick to
> stable releases. Thing is OpenBSD's backend is synchronous whereas
> the libusb advertis
On Tue, Aug 11, 2015 at 10:38:10AM +0100, Stuart Henderson wrote:
> On 2015/08/11 10:39, Максим wrote:
> > What is the cause for removed kerberos support in this packet? Is the
> > removed
> > support for kerberos in OpenBSD related to it?
>
> Yes. I will look at a diff if somebody would like to
Hi,
I added ICU flavor for devel/boost to proceed with
porting aegisub, the subtitle editor which requires
it.
Not really tested, just aegisub detects Boost.Regex
is built with ICU now (on AMD64).
I would be happy if more skilled porters could take
the diff and finalize it and commit it.
Thx!
On Wed, Sep 02, 2015 at 07:33:39PM -0400, Michael McConville wrote:
> I'm trying to port htop to OpenBSD. They recently made it portable and
> added FreeBSD and Darwin WIPs, so it's manageable.
>
> Some of the FreeBSD code is directly usable or tweakable. I've been
> hacking on it for an hour and
...ping...
On Wed, Sep 02, 2015 at 04:58:32AM -0400, Jiri B wrote:
> Hi,
>
> I added ICU flavor for devel/boost to proceed with
> porting aegisub, the subtitle editor which requires
> it.
>
> Not really tested, just aegisub detects Boost.Regex
> is built with ICU now (on
Anybody working on wxWidgets 3.0.2? If not I'm going
to take an initiative but I would later needs probably
some help with patches to correct SONAME.
j.
I really don't know what exactly to answer here:
- aegisub required icu-based Boost.Regex
- FreeBSD has icu flavor
- Fedora is built with icu
http://pkgs.fedoraproject.org/cgit/boost.git/tree/boost.spec
So maybe switch to icu by default?
j.
> On 2015/09/08 05:54, Jiri B wrote:
> >
1 - 100 of 433 matches
Mail list logo