sudden 3400 display problem

Help! I was merrily surfing along this evening and suddenly, my display just faded right out to white. I immediately restarted the machine, and it was booting normally, but the screen went crazy, banding and flickering, and briefly showing a normal display, then banding and fading out to white.

Re: drivers needed

On Monday, January 19, 2004, at 08:27 PM, Tom and Lisa P wrote: I need a set of drivers for my powerbooks: I need the drivers for a Global Village 56K/ethernet PCMCIA card. The GB website is too retarded to have the original drivers, only updates. My floppies are munged, so can anyone help

Re: drivers needed

I need the drivers for a Global Village 56K/ethernet PCMCIA card. The website has to be the worst one I have ever seen. I have a Gold data/Fax card, and for that one's drivers I did find (by Google) a link that bypasses their STUPID log-on process (which wouldn't let me have this file),

PB1400c CHK error

I was given a PB1400c after I recovered the data off it for a friend who didn't want to deal with it any longer. I initialized the hard drive, ran the disk utility/drive set up to check the erased disk for bad blocks, ran disk first aid, everything said fine, seems to be no problems. I updated

cleaning screen,s

what can i use to clean power book screen,s thank,s Mike Jaeger -- PowerBooks is sponsored by http://lowendmac.com/ and... Small Dog Electronicshttp://www.smalldog.com | Enter To Win A | -- Canon PowerShot Digital Cameras start at $299 | Free iBook! | Support Low End

Re: PB1400c CHK error

I'm actually suprised you got 7.5.3 to install.. I didn't have any luck with my 1400, I was given the error that it didn't support that os, and had to install 8.1. But I have gotten that error before.. What I found was that the ribbon cable that connects the hd to the mobo was partially loose.

Re: sudden 3400 display problem

That sounds like a cable problem. It's a pain, but can you remove the top plastics to see whether the video cable is firmly seated? Gary H wrote: Help! I was merrily surfing along this evening and suddenly, my display just faded right out to white. I immediately restarted the machine, and it

Re: PB1400c CHK error

I'm actually suprised you got 7.5.3 to install.. I didn't have any luck with my 1400, I was given the error that it didn't support that os, and had to install 8.1. Sys 7.5.3 is the early OS for PB 1400, may have been a model specific *enabler* problem But I have gotten that error before.. What

3400 Display Problem update

I was too tired last night to go through much beyond PRAM, but today when I turned it on, it began to show digital garbage -- not graphic, then suddenly when the Mac OS 8.6 screen came up, it was fine. It continued to boot and acts normally. We're going to take it apart this weekend anyway, and

Re: Boot crash OS 8.6

The DragLib function is actually built into the MacOS 8.6 System file, so it sounds like the problem is coming from an old extension that is explicitly trying to open the old DragLib file. Look for extensions circa 1990-1993 and disable them one by one until you find the culprit. By the way,

Re: clicking HD

Arrgh. A tale of woe: Went online and paid for DiskWarrior--a bit steep but if it works The download didn't go well, so I opted for their send by email method. Ok--got it, put the 2 files on my desktop, and discovered that my version of unstuffit is 5.x--and 7.x won't run on my setup.

Re: sudden 3400 display problem

Help! I was merrily surfing along this evening and suddenly, my display just faded right out to white. I immediately restarted the machine, and it was booting normally, but the screen went crazy, banding and flickering, and briefly showing a normal display, then banding and fading out to white.

need powerbook install help!

when i open an installer file, it says the program that created it could not be found?!? how am i suppose to install anything?? also, can someone post just the StuffIt Expander for Mac Installer not the .sit file or ..bin file? __ Do you Yahoo!? Yahoo! Hotjobs: