Frank Modica wrote:
I picked up a Farallon ethermac PC card on ebay to create an ethernet
network for a pb 1400 through the PCMCIA slot. The 1400 iss a 166 mhz model
with 56 mb of RAM. I installed the software from the diskette, but when I
stuck the card into the slot it didn't bite; springing
I use my Farrallon Ethermac card in the top slot only in my 1400c. Sometimes
when ejecting other cards (ie. CF reader or modem) the Farrallon card pops
out or if my cat runs by and catches the cable it will pull straight out
without popping the catch.
Sometimes I have to insert it when the modem
I picked up a Farallon ethermac PC card on ebay to create an ethernet
network for a pb 1400 through the PCMCIA slot. The 1400 iss a 166 mhz model
with 56 mb of RAM. I installed the software from the diskette, but when I
stuck the card into the slot it didn't bite; springing back and forth in
the
I have never heard of a 'male' PCMCIA card, nor for that matter a female pc
card slot.
Do both slots do the same thing? Perhaps the spring in the one you are
inserting into is stuffed?? Also, with the card out, press the eject button
- the spring might still be in the 'engaged' mode. Note,
