can't get the Specctra interface working)
>
>
>
> > -Original Message-
> > From: Tony Karavidas [mailto:[EMAIL PROTECTED]]
> > Sent: Sunday, July 28, 2002 1:13 AM
> > To: Protel EDA Forum
> > Subject: Re: [PEDA] Specctra interface??
> >
> &g
; Subject: Re: [PEDA] Specctra interface??
>
>
> I'm trying to get a very simple little unrouted board into
> Specctra and I'm
> having no luck.
>
> I've seen KB#1910 (among others that pop up when I search for
> Specctra) and
> I think 1910 doesn't a
I'm trying to get a very simple little unrouted board into Specctra and I'm
having no luck.
I've seen KB#1910 (among others that pop up when I search for Specctra) and
I think 1910 doesn't apply to SP6.
When I click on Autoroute/SpecctraInterface/Wizard, nothing happens. Same
for the other three
It would not surprise me in the
> least to find that the Specctra import was not set up to properly treat
> such vias. But perhaps someone knows better
>
>
Abdul,
You are sort of correct.Spectra recognizes them you just have to
identify them by name from the dsn file. I tried to assign
At 05:22 PM 1/17/2002 +0100, [EMAIL PROTECTED] wrote:
>I did a design with blind and buried vias (7 signal layers, 3 power
>layers), which I had routed by SPECCTRA. All looks fine in SPECCTRA, but it
>won't read back to Protel (actually it will, but thousands of errors show
>up). I know I have to
nt: Thursday, January 17, 2002 11:22 AM
Subject: [PEDA] SPECCTRA interface
>
> Hi all,
>
> I did a design with blind and buried vias (7 signal layers, 3 power
> layers), which I had routed by SPECCTRA. All looks fine in SPECCTRA, but
it
> won't read back to Protel (actually it will
Hi all,
I did a design with blind and buried vias (7 signal layers, 3 power
layers), which I had routed by SPECCTRA. All looks fine in SPECCTRA, but it
won't read back to Protel (actually it will, but thousands of errors show
up). I know I have to correct the drill size of vias manually, as eith
Thank you, Michael, for the very useful information.
Regards,
Gisbert
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/leave.html
* - or email -
If you'd like to get help using SPECCTRA, you should
check out www.specctra.com for the latest info as well
as the ability to join the SPECCTRA CCTUG user group.
Similar to this email list, there's a bunch of users
who can help you get the most out of SPECCTRA.
--- [EMAIL PROTECTED] wrote:
> Than
> Thanks for the hint, Mike. I will try like you suggest. I would like to
> avoid to have to do manual preroutes on almost all SMD fanouts. As these
> will be blind vias, I need different vias for connecting the inner layers.
>
Gisbert,
I found the easiest method of defining blind and buried vi
10 matches
Mail list logo