This is almost certainly a problem with the SIS OpenGL drivers, which aren't
up to the high standards currently being set by nVidia.
Again, the only useful advice one can offer is to update video drivers, if
possible. Otherwise, it may be time to look for new or used laptop with an
nVidia (best
Joris,
We used to experience this problem occasionally on Linux, but not anymore.
Your best bet is to update to the latest drivers. If that does not work,
then this may be an unsolvable hardware issue on older cards.
Cheers,
Warren
--
DeLano Scientific LLC
Subscriber Support Services
mailto:de
Jong,
Based on ChangeLog, draggable labels should be present in 0.99 and above.
Control-left-click-and-drag on the label while in edit mode.
Cheers,
Warren
--
DeLano Scientific LLC
Subscriber Support Services
mailto:del...@delsci.info
_
From: pymol-users-boun...@lists.sourceforge
Hi,
I have a 1G memory laptop with a sis650 graphics card runnign windows
xp. I use pymol a lot and sometimes I get the following error message:
Warning: can't create a new surface
Out of video memory
This program will exit
And the only solution for use pymol again is to reboot the computer.
Joris:
There is a thread (at least one, anyway) at the nvidia support forum,
that may address this problem:
http://www.nvnews.net/vbulletin/showthread.php?t=85807
Note, however, that the problem the thread addresses is under linux,
not windows.
--
Steve Lane
System, Network and Security Admin
Joris,
this is a well known problem with the NVIDIA cards. It gets better with the
newer highend cards but does not go away completely. You may want to invest in
such a card and play around with different drivers.
Carsten
> -Original Message-
> From: pymol-users-boun...@lists.sourcefor
Dear Pymol users,
We have a problem with one of our hardware stereo equipped PCs.
For some reason, hardware stereo works fine for about 30sec but than
switches to an inverted 3D image. And it keeps switching back and forth
between the 'normal' 3D image and the inverted one, every 30sec. This i
Dear Pymol Users,
I'm having a very difficult time moving labels/text in Pymol - to eventually
generate a stereo image. I've read the manuals, searched online, and tried the
obvious stuff with no success: 1) under edit_mode, I can't move any labels!!
2) I've also briefly attempted the ps
