Re: [Qgis-user] QGIS 3 and Pyhton 3 trouble

Hi on macOS (official installer) we use the python bundled inside the QGIS.app. Unfortunately Mac El Capitan 10.11.6 is not supported, and the python support starts at macOS 10.13.x Kind regards, Peter On Tue, Nov 16, 2021 at 10:44 AM Joachim wrote: > Hello, > > Open a terminal and give the fo

[Qgis-user] QGIS 3 and Pyhton 3 trouble

Hello,     i have trouble with installing QGIS 3.0.   I have a Mac El Capitan 10.11.6 and I like to use QGIS 3.0. I installed Python 3.6.for that but when I try to install QGIS 3.0 it says that Python 3.6 is required. So I´m not able to install QGIS. I don´t understadn the problem because i a

Re: [Qgis-user] QGIS-3 single line/point layers from hand-written co-ordinates

Hi John: Yes, life is too short to waste time.  I would add the lat/long into a spreadsheet or simple ascii text file.  This way, you can double check your entries and once you are ready, you can bring them into QGIS as a *.txt or *.csv file. A simple text format would be : 1,45.3741, -62.1

Re: [Qgis-user] QGIS-3 single line/point layers from hand-written co-ordinates

Hi John, Happy retirement... Simply create a text file with extension .csv and formatted as below, for example: First line should be something like the following: Longitude,Latitude,point,attribute_1,attribute_2 replace "attribute_x" with proper name

[Qgis-user] QGIS-3 single line/point layers from hand-written co-ordinates

I am a retired Chartered Engineer, Physician and Anaesthetist!. In retirement I have completed a PhD "The Maintenance of the Victorian Submarine Telegraph Cable System". I want to correlate N Atlantic cable interruptions with geological events of that era. I have found a raster-file of the sea bed

Re: [Qgis-user] QGIS 3.xx not starting

Thanks for the guidance from users, Nicolas Cadieux and Ujaval Gandhi. I have tried with disabled QuickHeal first, but no success. Then doing some other that was uninstalling the antivirus software. then QGIS was started. (As I have licensed version of QHeal, I wanted to have it on my system). So

Re: [Qgis-user] QGIS 3.xx not starting

Hi, I would start with the suggestion below. Then, I would update all the drivers and try to see what other software is normally auto loaded at startup to see what could be interfering with QGIS (like a anti malware). Concerning Quickheal, it may have blocked something at the installation so

Re: [Qgis-user] QGIS 3.xx not starting

One of the original suggestions was to disable / uninstall your anti-virus and try launching qgis. Did you try that? From your description it looks like Quickheal might be interfering with qgis. Qgis has other dependencies on python, qt etc so merely allowing qgis may not be enough. Ujaval Gandhi

Re: [Qgis-user] QGIS 3.xx not starting

As one suggestion came from other source, I have tried opening QGIS with firewall off. So I tried to add .exes of python, qgis ltr, qgis in allowed program in QuickHeal, as its installed and managed firewall, but did not start. So that strike me another idea. And I started the program in safe boot

Re: [Qgis-user] QGIS 3.xx not starting

Thanks, I'll check them out. On Tue, Dec 8, 2020, 7:32 PM Nicolas Cadieux wrote: > Hi, > > Just a bunch of ideas... > Did you have a working version before or is this a first time QGIS > installation? You have 2 choices of installers on Windows, I would try > with the second installer after rem

Re: [Qgis-user] QGIS 3.xx not starting

Hi, Just a bunch of ideas... Did you have a working version before or is this a first time QGIS installation? You have 2 choices of installers on Windows, I would try with the second installer after removing the first version. Reboot the computer after the installation. Try Disabling your an

[Qgis-user] QGIS 3.xx not starting

Hi, I am using QGIS 3.14.1 on my Laptop. I am having trouble with the software about its starting. After setting up python screen, it does not starts. I have also tried "run as administrator" but still the problem persists. With v3.10 and v3.14.1, the same problem is there. I have installed softwar

Re: [Qgis-user] QGIS 3 - Joins

...@utwente.nl; qgis-user@lists.osgeo.org Ämne: Re: [Qgis-user] QGIS 3 - Joins Hi Barend, you're right, I know this way and use it a lot as well. Unfortunately I have to edit features in this layer and that doesn't work with views. Burghardt > -Ursprüngliche Nachricht- &

Re: [Qgis-user] QGIS 3 - Joins

5-3 GIS); b.j.kob...@utwente.nl; qgis- > u...@lists.osgeo.org > Betreff: SV: [Qgis-user] QGIS 3 - Joins > > Hi! > It could work editing views if you set up some triggers or rules for editing > the > view. > > Karl-Magnus > > -Ursprungligt meddelande- > Från

Re: [Qgis-user] QGIS 3 - Joins

reitag, 18. Oktober 2019 11:53 > An: Scholle, Burghardt (15-3 GIS); qgis-user@lists.osgeo.org > Betreff: Re: [Qgis-user] QGIS 3 - Joins > > Another way would be to leave the joining up to Postgres, i.e. create a VIEW > with the Join and load that view as a layer in QGIS... > -- >

Re: [Qgis-user] QGIS 3 - Joins

Another way would be to leave the joining up to Postgres, i.e. create a VIEW with the Join and load that view as a layer in QGIS... -- Barend Köbben On 18/10/2019, 10:16, "Qgis-user on behalf of burghardt.scho...@stadt.wolfsburg.de" wrote: Dear list, I have a postgres layer that

Re: [Qgis-user] QGIS 3 - Joins

Hi Alessandro, good news, thanks for your reply and to your customer. Regards Burghardt Von: Alessandro Pasotti [mailto:apaso...@gmail.com] Gesendet: Freitag, 18. Oktober 2019 10:27 An: Scholle, Burghardt (15-3 GIS) Cc: qgis-user Betreff: Re: [Qgis-user] QGIS 3 - Joins On Fri, Oct 18, 2019

Re: [Qgis-user] QGIS 3 - Joins

On Fri, Oct 18, 2019 at 10:15 AM wrote: > Dear list, > > I have a postgres layer that is connected to other postgres lookup tables > via joins. QGIS does not take these joins into account when copying a layer > (to another project) or when creating style or layer files. This is really > annoying

[Qgis-user] QGIS 3 - Joins

Dear list, I have a postgres layer that is connected to other postgres lookup tables via joins. QGIS does not take these joins into account when copying a layer (to another project) or when creating style or layer files. This is really annoying if you have to rebuild the joins by hand over and

Re: [Qgis-user] QGIS 3 copy style form from one attribute table to another (both no geometry) does not seem to work

Thanks for confirming, Matthias (and bummer - I was hoping I had overlooked something :-) ). Will open a ticket. Janneke On 18/09/2019 16:38, Matthias Kuhn wrote: Hi Janneke, Sounds very much like a bug to me (or a very desirable feature, depending on the point of view). Can you open a ticket

Re: [Qgis-user] QGIS 3 copy style form from one attribute table to another (both no geometry) does not seem to work

Hi Janneke, Sounds very much like a bug to me (or a very desirable feature, depending on the point of view). Can you open a ticket for that? Thanks a lot Matthias On 9/18/19 3:00 PM, Janneke van Dijk wrote: Dear List, The work around seems to be to save the style as .qml and then load it f

Re: [Qgis-user] QGIS 3 copy style form from one attribute table to another (both no geometry) does not seem to work

Dear List, The work around seems to be to save the style as .qml and then load it for the other layer. I would still like to know if it is expected that copy style does not work in this case or that this is a bug. thanks, Janneke On 18/09/2019 15:56, Janneke van Dijk wrote: Dear List, I have

[Qgis-user] QGIS 3 copy style form from one attribute table to another (both no geometry) does not seem to work

Dear List, I have prepared a drag and drop designer form with several containers, and I would like to use the same form for another table with the same structure. Both tables do not contain geometry and are layers in two different geopackage files. I thought it should be possible to click Sty

Re: [Qgis-user] QGIS 3.X on Chromebook

Il giorno mar 30 apr 2019 alle ore 22:12 Michael Jabot < michael.ja...@fredonia.edu> ha scritto: > I am trying to help a set of teachers that would like to run QGIS on Chromebooks. We were able to install 2.14 but would like to be able to run 3.X. > > The installation runs from the Linux terminal.

[Qgis-user] QGIS 3.X on Chromebook

I am trying to help a set of teachers that would like to run QGIS on Chromebooks. We were able to install 2.14 but would like to be able to run 3.X. The installation runs from the Linux terminal. Has anyone had any luck doing this? Thank you in advance for any help you can offer. Mike Jabot --

Re: [Qgis-user] QGIS 3 Frozen

Start QGIS and go to Settings -> User Profiles -> New Profiles. QGIS may not freeze with a new one. I don't know if that answers your questions but it is something to test that maybe sheds some light on things. It will reset your plugins for the new profile - which would lead me to believe som

Re: [Qgis-user] QGIS 3 Frozen

Hello Colleagues, here an update about problems with the plugin manager (as described in my previous email): By incidence I discovered that my internet connection via the wifi router changed from 2.4GHz to 5GHz. That means I did the download and installation of the QGIS updates using the 5GH

[Qgis-user] QGIS 3 Frozen

Hello Colleagues, After I made the latest update I don´t get access to the plugin manager. Clicking on 'Plugins - Manage and Install Plugins...' QGIS stops to work. No error message appears, and to close QGIS I need to use the windows task manager. Currently, there are 3 QGIS versions on my co

Re: [Qgis-user] QGIS 3 - Postgres Authentication Issue

can you describe better the use case? I suppose you can't share project and db connection, so you need to give us steps to replicate the issue starting from a clean qgis profile. remember that side effects can be introduced by plugins that are not using correctly the qgis authentication infrastruc

[Qgis-user] QGIS 3 - Postgres Authentication Issue

Hello, we are using QGIS with a Postgres database where each different user (in total about 20 ) each have their own login credentials. Since we changed from QGIS 2.18 to QGIS 3 when opening a project QGIS always asks for the login data twice. I didn't change anything in the database / server.

Re: [Qgis-user] QGIS 3 - Deactivate "boxes" around labels

On Thu., 10 Jan. 2019, 18:13 Anna Hujber Hey community, > > I use 3.4.3-Madeira on a Ubuntu 18.04.1 LTS. > > I was modifying labels on a map when several rectangles appeared around > and next to the labels. I ignored them first cuz I was busy working on > making a label appear again I had hidden b

[Qgis-user] QGIS 3 - Deactivate "boxes" around labels

Hey community, I use 3.4.3-Madeira on a Ubuntu 18.04.1 LTS. I was modifying labels on a map when several rectangles appeared around and next to the labels. I ignored them first cuz I was busy working on making a label appear again I had hidden before and thought the display of boxes belonged

Re: [Qgis-user] QGIS 3 Interface Customisation

Behalf Of *Andreas Neumann *Sent:* 03 January 2019 13:38 *To:* qgis-user@lists.osgeo.org *Subject:* Re: [Qgis-user] QGIS 3 Interface Customisation Hi Paul, Have you tried accessing the Options from the "Locator toolbar" in the bottom left? Just type in "General" or "Sys

Re: [Qgis-user] QGIS 3 Interface Customisation

January 2019 13:38 To: qgis-user@lists.osgeo.org Subject: Re: [Qgis-user] QGIS 3 Interface Customisation Hi Paul, Have you tried accessing the Options from the "Locator toolbar" in the bottom left? Just type in "General" or "System" and open it from the Locator tool

Re: [Qgis-user] QGIS 3 Interface Customisation

Hi Paul, Have you tried accessing the Options from the "Locator toolbar" in the bottom left? Just type in "General" or "System" and open it from the Locator toolbar. Perhaps that would still work if the "Settings" menu is disabled? I haven't tried it though - so not sure if it would work.

Re: [Qgis-user] QGIS 3 Interface Customisation

IMHO a good feature request Luigi Pirelli ** * LinkedIn: https://www.linkedin.com/in/luigipirelli * Stackexchange: http://gis.stackexchange.com/users/19667/luigi-pirelli * GitHub: https://github.com/lu

[Qgis-user] QGIS 3 Interface Customisation

Hello, I'm trying to create a cut down profile for QGIS 3 to deploy as a viewer for low end users. I don't want to display the settings menu but I do want to be able to access it via keyboard shortcuts so I setup keyboard shortcuts for "Options" as an example. Unfortunately the keyboard shortcu

[Qgis-user] QGIS 3 quit unexpectedly ... when i close it - MacOS 10.13.6 High Sierra

"QGIS 3 quit unexpectedly" ... when i close it. OS: MacOS 10.13.6 High Sierra Why? Any fix? Thanks, Manolo ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-user Unsubscribe: https://lists.osg

Re: [Qgis-user] QGIS 3 Standalone Python Script

Just had another standalone path issue. Not sure if this is a Shapely bug, QGIS packaging bug, or maybe not a bug at all, just a path issue. Again, versions: OSX, version 10.13.6 Python 3.6.6 QGIS 3.2.1 In python, I tried: `from shapely.geos import geos_version` and got the following error: T

Re: [Qgis-user] qgis 3 on CentOS

Hi Valentin, I meant in the first line, I would consider switching to another distribution if you want to use QGIS 3. In this sense yes, if you are bound to this CentOS distribution I would recommend to stick to 2.18 or look for a way to run QGIS in a virtualized environment. Best regards Matthi

Re: [Qgis-user] qgis 3 on CentOS

"I would recommend to use another distribution with Qt 5.10 or newer." By this you mean an older version of QGIS such as 2.18 / 2.14 right ? Valentin -- Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html ___ Qgis-user mailing list

Re: [Qgis-user] QGIS 3 Standalone Python Script

Thanks William! All is working now. Chris - here's what is working for me: https://gist.github.com/dmofot/94345126db10660053ccfb0d76a1e32a and I'm just passing the layers (full path) into the script. For example, /Users//Documents/ DT On Mon, Aug 6, 2018 at 11:03 AM, Chris B wrote: > Thanks

Re: [Qgis-user] QGIS 3 Standalone Python Script

Thanks so much for helping out with this. The script now no longer fails looking for Qt, great! But I'm still getting a very basic error -- loading a layer from the file system doesn't work. Here's the script: import sys sys.path.insert(0,'/Applications/QGIS3.app/Contents/Frameworks/') sys.pa

Re: [Qgis-user] QGIS 3 Standalone Python Script

Found the solution. Qt5 is having trouble figuring out its plugin path relative to its frameworks (I don't know if it's a bug or not), you need to tell it with: export QT_QPA_PLATFORM_PLUGIN_PATH=/Applications/QGIS3.app/Contents/Plugins > On Aug 5, 2018, at 2:47 PM, Chris B wrote: > > Since

Re: [Qgis-user] QGIS 3 Standalone Python Script

In my linux system I need /usr/lib/python3/dist-packages, taking the python from QGIS (QGIS install its own python, it don't use the python installed in the system) El 06/08/18 a las 03:04, Chris B escribió: Thanks for the tip - nothing odd stands out... ['/Applications/QGIS3.app/Contents/Re

Re: [Qgis-user] QGIS 3 Standalone Python Script

Thanks for the tip - nothing odd stands out... ['/Applications/QGIS3.app/Contents/Resources/python/plugins', '/Applications/QGIS3.app/Contents/Resources/python/', '/Users/cbarnes/scripts', '/Users/cbarnes/scripts', '/Applications/QGIS3.app/Contents/Resources/python', '/Library/Framework

Re: [Qgis-user] QGIS 3 Standalone Python Script

From python console, inside QGIS, you can see the active path with: import sys print(sys.path) El 05/08/18 a las 21:47, Chris B escribió: Since I am having the same error as DT, I tried your suggestion but it still returns the same error. Is there anything in this bash profile that would caus

Re: [Qgis-user] QGIS 3 Standalone Python Script

Since I am having the same error as DT, I tried your suggestion but it still returns the same error. Is there anything in this bash profile that would cause problems? export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/Applications/QGIS3.app/Contents/MacOS/lib/:/Applications/QGIS3.app/Contents/Frameworks/ e

Re: [Qgis-user] QGIS 3 Standalone Python Script

Did you install PyQt5 separately from QGIS? It's included in the QGIS app, but if you append QGIS to the python path python will not see the QGIS PyQt5. Try an insert instead: sys.path.insert(0,'/Applications/QGIS3.app/Contents/Resources/python/') sys.path.insert(0,'/Applications/QGIS3.app/Cont

[Qgis-user] QGIS 3 Standalone Python Script

OSX, version 10.13.6 Python 3.6.6 QGIS 3.2.1 QGIS itself is working fine with no errors, but I'm trying to write a standalone python script that utilizes a QGIS3 tool and I keep running into Qt errors. This works fine: import os import sys sys.path.append('/Applications/QGIS3.app/Contents/Resour

Re: [Qgis-user] qgis 3 on CentOS

Hi Valentin, Thank you for reporting this. The repository unfortunately no longer exists and packages for QGIS 3 where never available there. The link will be removed from the download page. I am not sure if there is an alternative repository that offers it. The situation with CentOS is often co

[Qgis-user] qgis 3 on CentOS

I'm trying to install qgis on CentOS 7. I followed instruction on qgis download page however the repository (fedora.vitu.ch) seem to be broken. I made : sudo wget fedora.vitu.ch/EL/qgis.repo -P /etc/yum.repos.d/ then this error message appear : Resolving fedora.vitu.ch (fedora.vitu.ch)... faile

Re: [Qgis-user] QGIS 3 installation on Ubuntu

Am 17.07.18 um 23:28 schrieb Patrick Dunford: Well, that's an interesting question (renaming the path to debian-ubuntu could be thought of?) I would prefer one path debian, one path ubuntu, and one ubuntugis. The amount of data would be almost the same. And if other distros might get their o

Re: [Qgis-user] QGIS 3 installation on Ubuntu

Hi Patrik, On Wed, 18. Jul 2018 at 09:28:37 +1200, Patrick Dunford wrote: > On 17/07/18 23:02, Andre Joost wrote: > > Am 17.07.18 um 03:58 schrieb Patrick Dunford: > > > 1. The repositories labelled "debian" are for both Debian and Ubuntu - > > > you specify the release name in the deb statement w

Re: [Qgis-user] QGIS 3 installation on Ubuntu

Well, that's an interesting question (renaming the path to debian-ubuntu could be thought of?) On 17/07/18 23:02, Andre Joost wrote: Am 17.07.18 um 03:58 schrieb Patrick Dunford: 1. The repositories labelled "debian" are for both Debian and Ubuntu - you specify the release name in the deb st

Re: [Qgis-user] QGIS 3 installation on Ubuntu

Am 17.07.18 um 03:58 schrieb Patrick Dunford: 1. The repositories labelled "debian" are for both Debian and Ubuntu - you specify the release name in the deb statement which supports release names for both distros. Not very intuitive for new users :-( 2. You need to check error messages from

Re: [Qgis-user] QGIS 3 installation on Ubuntu

Hi there The core development of Qgis is on Linux so it is very well supported on that platform. In answer to your specific questions: * Use the latest stable version of Ubuntu (18.04) - variants like Lubuntu, Xubuntu etc also work well and may be more suited to specific requirements. 1. The

Re: [Qgis-user] QGIS 3 installation on Ubuntu

There are several ways to share data (DB connections) between your developing machine and the server (FTP, firewall port mapping, ssh mounts, other network shares). Sorry: read as "(shapefiles, DB connections etc.) " -- Alessandro Pasotti w3: www.itopen.it ___

Re: [Qgis-user] QGIS 3 installation on Ubuntu

On Mon, Jul 16, 2018 at 1:21 PM, Mats Elfström wrote: > > Hi all! > > 3/ The instructions give the advice: ”In case you would like to install > QGIS Server (note that it’s not a common practice to install both client > and server applications on the same machine)…” > > Why is that? To me it wou

[Qgis-user] QGIS 3 installation on Ubuntu

Hi all! I am in need of some advice, because I am venturing into unknown territory. I want to explore the Linux side of QGIS, and I want to set up a Linux GIS machine (Cloud based). Bear with me, because my computing skills are in Microsoft territory. However, they date back from DOS days so I wou

[Qgis-user] QGIS 3 - macOS - Python 3 note

Just a note about the Python 3 requirement for the macOS QGIS 3 - the default Python 3 download is now 3.7, but I still build QGIS with 3.6. You MUST USE 3.6, you can't substitute 3.7. You can get Python 3.6 from "Downloads" in the menu at the top of the python.org page. - William Kyngesb

Re: [Qgis-user] QGIS 3 Processing question

https://github.com/frankbroniewski/polygoncenterline/blob/master/PolygonCenterline.py -Ursprüngliche Nachricht- Von: Nyall Dawson Gesendet: Dienstag, 3. Juli 2018 11:55 An: Frank Broniewski Cc: qgis-user Betreff: Re: [Qgis-user] QGIS 3 Processing question > Nyall's tip with the te

Re: [Qgis-user] QGIS 3 Processing question

> Nyall's tip with the temporary layer store just runs through nicely, but > nothing gets added to the layer pane after the script finished. Sorry - missed something here. Because you're directly using the output from the child algorithm as your algorithm's final output, you should also pass the

Re: [Qgis-user] QGIS 3 Processing question

rassink#qgis.core.QgsProcessingAlgorithm.addParameter -Ursprüngliche Nachricht- Von: Nyall Dawson Gesendet: Dienstag, 3. Juli 2018 01:37 An: Frank Broniewski Cc: qgis-user Betreff: Re: [Qgis-user] QGIS 3 Processing question On Fri, 29 Jun 2018 at 17:35, Frank Broniewski wrote: >

Re: [Qgis-user] QGIS 3 Processing question

On Fri, 29 Jun 2018 at 17:35, Frank Broniewski wrote: > def processAlgorithm(self, parameters, context, feedback): > # qgis:pointsalonglines > params = { > 'INPUT': parameters[self.INPUT], > 'DISTANCE': parameters[self.DISTANCE], > 'START_OF

Re: [Qgis-user] QGIS 3 Processing question

Dawson ; qgis-user Betreff: Re: [Qgis-user] QGIS 3 Processing question Hi, I had the same issue. I had to loop over the output vector layer (child alg) to feed the sink (main alg). Maybe is not the simpliest/shortest/fastest, but it works. Something like that : o = processing.run

Re: [Qgis-user] QGIS 3 Processing question

Frank Broniewski Cc: qgis-user Betreff: Re: [Qgis-user] QGIS 3 Processing question Hi Frank, On Fri, 29 Jun 2018 at 09:35, Frank Broniewski mailto:ha...@frankbroniewski.com> > wrote: Anyway, my testing-algorithm-script is still not working. It runs through, but I do not get the expected r

Re: [Qgis-user] QGIS 3 Processing question

Hi Frank, On Fri, 29 Jun 2018 at 09:35, Frank Broniewski wrote: > Anyway, my testing-algorithm-script is still not working. It runs through, > but I do not get the expected result loaded into the layer tree. I suppose > it runs through - the output from the 'qgis:pointsalonglines' is a > QgsVec

Re: [Qgis-user] QGIS 3 Processing question

lines > params = { > 'INPUT': parameters[self.INPUT], > 'DISTANCE': parameters[self.DISTANCE], > 'START_OFFSET': 0, > 'END_OFFSET': 0, > 'OUTPUT': 'memory:

Re: [Qgis-user] QGIS 3 Processing question

SET': 0, 'END_OFFSET': 0, 'OUTPUT': 'memory:' } points = processing.run( 'qgis:pointsalonglines', params, context=context, feedback=feedback )['OUTPUT'] return {self.OUTP

Re: [Qgis-user] QGIS 3 Processing question

On Fri, 29 Jun 2018 at 07:14, Frank Broniewski wrote: > > def processAlgorithm(self, parameters, context, feedback): You're making this tricky for yourself! Cut out everything in processAlgorithm related to self.INPUT, and just pass the parameter value direct to the child algorithm to handle

[Qgis-user] QGIS 3 Processing question

Hi all, I am getting my feet wet with the new QGIS 3 Processing script syntax. In my script I want to use some other processing scripts from the toolbox. I think I got most things right, but I do not get a result back. For testing I just try to use ‘qgis:pointsalonglines’ on a temporary polygon

[Qgis-user] QGIS 3, Import a project into an existing / or the open project, Python

Hi, I need some advice on how to import an existing project into my open project using Python in Qgis 3. I am looking for something similar to https://docs.qgis.org/testing/en/docs/pyqgis_developer_cookbook/loadproject.html, but the script should add the content of a .qgs-File (the layers, struc

Re: [Qgis-user] Qgis 3 on Arch / Manjaro

Check also if qt5-imageformats package is installed. Without it you can't export TIFs form the composer. Not sure what else it is needed for. ___ Qgis-user mailing list Qgis-user@lists.osgeo.org List info: https://lists.osgeo.org/mailman/listinfo/qgis-use

Re: [Qgis-user] Qgis 3 on Arch / Manjaro

So, sudo pacman -S python-owslib python-psycopg2 should do it. Then there shouldn't be any problems. If it complains of files already existing and won't install, check the file with pacman -Qo to see if a package owns it (probably not) and then remove it. Then re-run the previous command. On

Re: [Qgis-user] Qgis 3 on Arch / Manjaro

It says these modules are not found owslib psycopg2 On 31/05/18 14:05, Niklas Moran wrote: I use QGIS 3.03 on Arch and do not have any problems. I've got testing repo enabled. What missing module errors do you have? I did have a problem a while back with an old version of some library I in

Re: [Qgis-user] Qgis 3 on Arch / Manjaro

I use QGIS 3.03 on Arch and do not have any problems. I've got testing repo enabled. What missing module errors do you have? I did have a problem a while back with an old version of some library I installed for kde that was no longer needed. Check the aur.archlinux.org's comments under the QGI

[Qgis-user] Qgis 3 on Arch / Manjaro

Anybody on this list using Qgis on Arch or Manjaro? The distro community obviously have some problems with building working versions. The latest 3.03 is giving me missing module errors and has problems displaying some of my rasters. Not seeing these issues in Debian.

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

Cool. > On May 25, 2018, at 8:04 PM, Reg Maltais wrote: > > Huh, pip3 told me they weren’t installed. I went in and deleted the > directories manually, reran the installer and the logs show them getting > installed correctly. QGIS opens without error now, and processing is > available now. >

Re: [Qgis-user] QGIS 3 clipping raster with a polygon - problem

I have upgraded to 3.0.3 and tried to clip another file. Oh Joy! It worked. However I was a bit disconcerted by the GDAL readout at the bottom of the box which described output to a temp file even though I had specified a new filename and location. However, the new file name was actually applied. H

Re: [Qgis-user] QGIS 3 clipping raster with a polygon - problem

Am 24.05.18 um 15:25 schrieb David Addy: Hi Nyall, Thanks very much for looking at this. The two versions are as follows: From QGIS 2.18.16 I get: gdalwarp -q -cutline "D:/My Pictures/QGIS Projects/Payne calibration/payne_clipper.shp" -tr 0.639640252898 0.639640252898 -of GTiff "D:/My Pictures/

Re: [Qgis-user] QGIS 3 clipping raster with a polygon - problem

In case it helps, here is a screengrab of the QGIS 3 input box. There are no spaces in my file names. -- Sent from: http://osgeo-org.1560.x6.nabble.com/QGIS-User-f4125267.html ___ Qgis

Re: [Qgis-user] QGIS 3 clipping raster with a polygon - problem

just a wild guess: you have lots of spaces in your path and file names. This is to be avoided in general, cause lots of function may eat this, but lots of others may not. Try it with underscores instead of spaces. Am 24.05.2018, 15:25 Uhr, schrieb David Addy : Hi Nyall, Thanks very much fo

Re: [Qgis-user] QGIS 3 clipping raster with a polygon - problem

Hi Nyall, Thanks very much for looking at this. The two versions are as follows: From QGIS 2.18.16 I get: gdalwarp -q -cutline "D:/My Pictures/QGIS Projects/Payne calibration/payne_clipper.shp" -tr 0.639640252898 0.639640252898 -of GTiff "D:/My Pictures/QGIS Projects/Payne calibration/payne_modifi

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

The homebrew site-packages should not affect the python framework site-packages. But there may be other parts of virtualenv that the framework sees. I found one thing I can try with the installer. > On May 24, 2018, at 5:14 AM, Reg Maltais wrote: > > I just went looking through my homebrew s

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

I just went looking through my homebrew stuff, and I have an older version of python3 in there that I completely forgot about. That’s why pyenv and a bunch of other things got installed. When I go look into /usr/local/lib/python3.6/site-packages/ I see virtualenv.py, osgeo, numpy, etc. > On Ma

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

I do have virtualenv installed. I had it prior to installing python3. virtualenv is at version 15.1.0 (apparently I haven’t used it in a while). > On May 23, 2018, at 10:04 PM, William Kyngesburye > wrote: > > Ah, now we're getting somewhere. Did you install some other python 3 > modules?

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

Ah, now we're getting somewhere. Did you install some other python 3 modules? Maybe pyenv or virtualenv? > On May 23, 2018, at 5:19 PM, Reg Maltais wrote: > > Here’s the truncated output to show just the postinstall lines: > > May 23 18:14:15 Bellerophon installd[636]: PackageKit: Executing

Re: [Qgis-user] QGIS 3 clipping raster with a polygon - problem

On 24 May 2018 at 01:12, David Addy wrote: > I have had another go with another dataset. > I have tried both these algorithms in QGIS 3.0.2: > 1. Gdal ->" Raster extraction" -> "Clip raster by mask layer" > 2. Saga -> "Vector <-> raster" -> "Clip raster with polygon" > Both give an error

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

Here’s the truncated output to show just the postinstall lines: May 23 18:14:15 Bellerophon installd[636]: PackageKit: Executing script "./postinstall" in /private/tmp/PKInstallSandbox.AXwBn9/Scripts/org.maptools.proj-framework-yosemite.xOVaFz May 23 18:14:16 Bellerophon installd[636]: ./postins

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

That was just a test, only one python module. So, now it looks like pip is working in the Terminal, but not in my installers. Try running the GDAL Complete installer again, but don't close it when it finishes. Instead, open the Installer Log from the Window menu (in the installer). Then use

Re: [Qgis-user] QGIS 3 clipping raster with a polygon - problem

I have had another go with another dataset. I have tried both these algorithms in QGIS 3.0.2: 1. Gdal ->" Raster extraction" -> "Clip raster by mask layer" 2. Saga -> "Vector <-> raster" -> "Clip raster with polygon" Both give an error message. In the case of GDAL it is :"GDAL command o

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

So that worked: Processing /Library/Frameworks/GDAL.framework/Versions/2.2/Resources/GDAL-2.2.4-cp36-none-macosx_10_6_intel.whl Installing collected packages: GDAL Successfully installed GDAL-2.2.4 I’m getting different errors when opening QGIS now, I’m assuming due to not having run pip install

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

Try one manual install to see if there are any errors (I expect so): sudo pip3 install --no-cache-dir --force-reinstall /Library/Frameworks/GDAL.framework/Versions/2.2/Resources/GDAL-2.2.4-cp36-none-macosx_10_6_intel.whl > On May 22, 2018, at 8:05 PM, Reg Maltais wrote: > > Installed 10.9 Pyth

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

Installed 10.9 Python, then GDAL Complete, then QGIS. Same result; missing osgeo. I get a follow on error from MetaSearch complaining that owslib.csw is missing as well. > On May 22, 2018, at 8:50 PM, William Kyngesburye > wrote: > > Try installing the 10.9 version of Python. > > Then reins

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

Try installing the 10.9 version of Python. Then reinstall GDAL and QGIS. > On May 22, 2018, at 7:37 PM, Reg Maltais wrote: > > The python version I installed was the “older” 10.6 version of python. > pyp version is "pip 10.0.1 from > /Library/Frameworks/Python.framework/Versions/3.6/lib/python

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

The python version I installed was the “older” 10.6 version of python. pyp version is "pip 10.0.1 from /Library/Frameworks/Python.framework/Versions/3.6/lib/python3.6/site-packages/pip (python 3.6)" My macOS version is 10.13.4. I’m willing to install all the modules manually if you want me to ru

Re: [Qgis-user] QGIS 3 errors after install on macOS 10.13.4

The latest pip, as used to install Python modules, has a problem that affects some people. I haven't figured out a definite solution, but there is a workaround that means manually installing all the python modules. Or you can wait for QGIS 3.0.3 - at least I'll use the workaround in the instal

[Qgis-user] QGIS 3 errors after install on macOS 10.13.4

Hi, I’ve run a complete install of Python 3 (python-3.6.5-macos10.6.pkg), GDAL complete, then QGIS 3.0.2. When I open QGIS I get the error below. I found a thread that has a similar error, and the fix was to reinstall all the components, but I’ve done this a few times now to no avail (both over

[Qgis-user] QGIS 3 clipping raster with a polygon - problem

I have always been able to clip a raster using the mask made by drawing a polygon around the required area in QGIS 2. However, in QGIS 3 the process does not work the same way. I cannot figure out how to make a new output file, and whatever I try results in no comprehensible output. I have just suc

  1   2   >