What changes did you make to what File? Or, what documentation were you
following?
On Sun, Nov 27, 2016 at 11:05 AM -0700, "David Overman"
wrote:
Greetings,I just got this server up Centos 6.2I updated squirrelmail.conf to
activate squirellmail, but when I tried to restart
I found this in the archive, and I made the changes to squirrelmail like it
said.
Now I am getting a different error.
AH00526: Syntax error on line 8 of /etc/httpd/conf/squirrelmail.conf:
ErrorDocument takes two arguments, Change responses for HTTP errors
- Original Message - From: "Max
ail.example.com]
nameserver 127.0.0.1
nameserver 8.8.8.8
nameserver 8.8.4.4
From: David Overman
Reply-To:
Date: Sunday, November 27, 2016 at 3:05 PM
To:
Subject: Re: [qmailtoaster] error after changing squirrelmail conf
new-install
I found this in the archive, and I made the changes to sq
o:
Subject: Re: [qmailtoaster] error after changing squirrelmail conf new-install
I found this in the archive, and I made the changes to squirrelmail like it
said.
Now I am getting a different error.
AH00526: Syntax error on line 8 of /etc/httpd/conf/squirrelmail.conf:
ErrorDocument takes two arguments, C
n mailto:davesp...@me.com>>
Reply-To: <mailto:qmailtoaster-list@qmailtoaster.com>>
Date: Sunday, November 27, 2016 at 3:05 PM
To: <mailto:qmailtoaster-list@qmailtoaster.com>>
Subject: Re: [qmailtoaster] error after changing squirrelmail conf
new-install
I found this in
man
Reply-To:
Date: Sunday, November 27, 2016 at 3:05 PM
To:
Subject: Re: [qmailtoaster] error after changing squirrelmail conf new-install
I found this in the archive, and I made the changes to squirrelmail like it
said.
Now I am getting a different error.
AH00526: Syntax error on line
oaster-list@qmailtoaster.com>>
Subject: Re: [qmailtoaster] error after changing squirrelmail conf
new-install
I found this in the archive, and I made the changes to squirrelmail
like it said.
Now I am getting a different error.
AH00526: Syntax error on line 8 of /etc/httpd/conf/squirrel
8.8.4.4
From: David Overman
Reply-To:
Date: Sunday, November 27, 2016 at 3:05 PM
To:
Subject: Re: [qmailtoaster] error after changing squirrelmail conf new-install
I found this in the archive, and I made the changes to squirrelmail like it
said.
Now I am getting a different error.
AH00526: Sy
toaster.com>>
Subject: Re: [qmailtoaster] error after changing squirrelmail
conf new-install
I found this in the archive, and I made the changes to
squirrelmail like it said.
Now I am getting a different error.
AH00526: Syntax error on line 8 of /etc/httpd/conf/squirrelmail.conf:
ErrorDoc
meserver 8.8.4.4
From: David Overman
Reply-To:
Date: Sunday, November 27, 2016 at 3:05 PM
To:
Subject: Re: [qmailtoaster] error after changing squirrelmail conf new-install
I found this in the archive, and I made the changes to squirrelmail like it
said.
Now I am getting a different error
meserver 8.8.4.4
From: David Overman mailto:davesp...@me.com>>
Reply-To: <mailto:qmailtoaster-list@qmailtoaster.com>>
Date: Sunday, November 27, 2016 at 3:05 PM
To: <mailto:qmailtoaster-list@qmailtoaster.com>>
Subject: Re: [qmailtoaster] error after changing squirrelmai
"unparsable nameserver" error originally
He should change the IPs to ipv4
[root@mail ~]# cat /etc/resolv.conf
search [whatever his mailserver is, i.e. mail.example.com]
nameserver 127.0.0.1
nameserver 8.8.8.8
nameserver 8.8.4.4
From: David Overman
Reply-To:
Date: Sunday, Nove
# systemctl start network
On 11/28/2016 12:16 AM, David Overman wrote:
Failed to start NetworkManager.service: Unit NetworkManager.service is
masked
-
To unsubscribe, e-mail: qmailtoaster-list-unsubscr...@qmailtoaster.com
Fo
[root@mail ~]# systemctl start network
[root@mail ~]# nmtui
NetworkManager is not running.
Do you think this may have something to do with my Centos Instance running on A
digitalocean droplet?
On Nov 28, 2016, at 07:37 AM, Eric Broch wrote:
# systemctl start network
On 11/28/2016 12:16 AM,
I'm running my install on a digital ocean droplet on Cent OS 7.2 with no
problems at all. It runs beautifully there. I found Eric's instructions by
Googling and followed them for the install and everything worked great. I'm
running roundcube and not squirrelmail, but qmail itself was up and runn
Fantastic Jaime,
Thank You!,
I just opened a ticket on DO. I'll close it now. Does Eric have specific
instructions for DO?
googling now.
David
On Nov 29, 2016, at 07:57 AM, Jaime Lerner wrote:
I'm running my install on a digital ocean droplet on Cent OS 7.2 with no
problems at all. It
No, Eric's instructions are generic. I'll take a look at my notes, and see if I
can help you any to get going on this on a digital ocean droplet.
> On Nov 29, 2016, at 9:03 AM, David Overman wrote:
>
> Fantastic Jaime,
> Thank You!,
>
> I just opened a ticket on DO. I'll close it now. Does Eri
Jamie,
I already have this installed(Centos 7.2). Maybe I should look at Roundcube, and forget
about squirrelmail and the errors that are being generated by apache regarding,
"unknown nameserver"?
David
On Nov 29, 2016, at 08:18 AM, Jaime Lerner wrote:
No, Eric's instructions are generic. I
Try running this:
https://raw.githubusercontent.com/qmtoaster/scripts/master/qmt_host.sh
Or
Take a look here:
http://ask.xmodulo.com/configure-static-ip-address-centos7.html
You must get rid of the IPv6 name servers
On 11/29/2016 4:37 AM, David Overman wrote:
[root@mail ~]# systemctl sta
Then you'll have to do it manually. You do not need the ipv6 addresses.
Take a look at the site I sent.
On 11/29/2016 7:48 AM, David Overman wrote:
Ok,
I tried the script with my ip for ip4 address and 8.8.8.8 and 8.8.4.4
and with my actual ip and hostname.
Still getting Error: NetworkManager
Ok,
I tried the script with my ip for ip4 address and 8.8.8.8 and 8.8.4.4
and with my actual ip and hostname.
Still getting Error: NetworkManager is not running.
[root@mail ~]# sh qmt-host.sh
Call this script as follows (example below):
qmt-host.sh hostname ipv4.address ipv4.gateway
qmt-host.sh
I created the file ifcfg-enp0s3, as it was not in /etc/sysconfig/network-scripts
HWADDR="08:00:27:F3:D4:74"
TYPE="Ethernet"
BOOTPROTO="static"
IPADDR=192.168.0.17
NETMASK=255.255.255.0
NM_CONTROLLED=no
DEFROUTE="yes"
PEERDNS="yes"
PEERROUTES="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCO
Here's what I would do
# cp -p /etc/sysconfig/network-scripts/ifcfg-eth0 /root/'somewhere'
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
erase all settings, paste below into the file and save
# systemctl restart network
DEVICE='eth0'
TYPE=Ethernet
BOOTPROTO=none
ONBOOT='yes'
HWADDR=62:ed:ca
Do below and remove ifcfg-enp0s3
On 11/29/2016 8:32 AM, Eric Broch wrote:
Here's what I would do
# cp -p /etc/sysconfig/network-scripts/ifcfg-eth0 /root/'somewhere'
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
erase all settings, paste below into the file and save
# systemctl restart ne
And,
What are these settings:
IPADDR2=10.13.0.5
PREFIX2=16
If you don't need them remove.
On 11/29/2016 8:34 AM, Eric Broch wrote:
Do below and remove ifcfg-enp0s3
On 11/29/2016 8:32 AM, Eric Broch wrote:
Here's what I would do
# cp -p /etc/sysconfig/network-scripts/ifcfg-eth0 /root/'
M
To:
Subject: Re: [qmailtoaster] error after changing squirrelmail conf
new-install
And,
What are these settings:
IPADDR2=10.13.0.5
PREFIX2=16
If you don't need them remove.
On 11/29/2016 8:34 AM, Eric Broch wrote:
>
>
> Do below and remove ifcfg-e
n issue...it's obviously not.
From: Eric Broch <mailto:ebr...@whitehorsetc.com>>
Reply-To: <mailto:qmailtoaster-list@qmailtoaster.com>>
Date: Tuesday, November 29, 2016 at 10:45 AM
To: <mailto:qmailtoaster-list@qmailtoaster.com>>
Subject: Re: [qmailtoaster] error after changin
x27;systemctl status network' to see that his network service is
running fine. (Mine shows it's using /etc/rc.d/init.d/network, and his may
say the same)
From: Eric Broch
Reply-To:
Date: Tuesday, November 29, 2016 at 10:59 AM
To:
Subject: Re: [qmailtoaster] error after changing
nning". Just in case you're thinking that's an
issue...it's obviously not.
From: Eric Broch
Reply-To:
Date: Tuesday, November 29, 2016 at 10:45 AM
To:
Subject: Re: [qmailtoaster] error after changing squirrelmail conf new-install
And,
What are these settings:
IPADDR2=10.13.0.
S 7...not sure.
He can run 'systemctl status network' to see that his network service is
running fine. (Mine shows it's using /etc/rc.d/init.d/network, and his may say
the same)
From: Eric Broch
Reply-To:
Date: Tuesday, November 29, 2016 at 10:59 AM
To:
Subject: Re: [qmailtoa
e
is running fine. (Mine shows it's using /etc/rc.d/init.d/network, and
his may say the same)
From: Eric Broch <mailto:ebr...@whitehorsetc.com>>
Reply-To: <mailto:qmailtoaster-list@qmailtoaster.com>>
Date: Tuesday, November 29, 2016 at 10:59 AM
To: <mailto:qmailtoaster-lis
6, at 10:45 AM, Jaime Lerner wrote:
I was just mentioning it because David kept pointing to that as an error and
thinking it was the issue as to why qmail wasn't working. It's definitely not
an issue on my server. Perhaps that's how it is set up for Digital Ocean
servers running
Change
ErrorDocument 403 "https://mail.davomail.com/webmail/";;
To
ErrorDocument 403 https://mail.davomail.com/webmail/
On 11/29/2016 6:34 PM, David Overman wrote:
RewriteEngine on
RewriteCond %{SERVER_PORT} !^443$
RewriteRule ^(.*/webmail*)$ https://%{SERVER_NAME}$1 [L,R]
allow from all
Opt
At least httpd started, but resulted in a 404 error
https://mail.davomail.com/webmail
and https://davomail.com/webmail logs show named errors.
[root@mail httpd]# service httpd restart
Redirecting to /bin/systemctl restart httpd.service
[root@mail httpd]# service httpd status
Redirecting to /bin/
Here's my squirrelmail.conf
#
# SquirrelMail is a webmail package written in PHP.
#
Alias /webmail /usr/share/squirrelmail
# Apache 2.4
Require all denied
# Apache 2.2
Order deny,allow
Deny from all
# this section makes squirrelmail use https connections only
tried your conf file :
[root@mail httpd]# journalctl -xe
--
-- Unit httpd.service has begun shutting down.
Nov 30 07:41:22 mail.davomail.com systemd[1]: Starting The Apache HTTP Server...
-- Subject: Unit httpd.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop
Forget last post, Squiirrelmail is working after changing the conf file.
Is there a post or guide for roundcube anywhere, or just use generic
instructions at roundcube?
Thanks to everyone.
David Overman
37 matches
Mail list logo
