On 06/09/2016 10:31 PM, Drew White wrote:
Hi folks,
Debian 8...
On boot, the rc.local file doesn't execute after the system has booted.
What could be wrong?
root@***:/rw/config# ls -al
total **M
drwxr-xr-x 3 root root 4.0K Jun 10 12:24 .
drwxr-xr-x 9 root root 4.0K Jun 8 12:11 ..
Hi folks,
I'm wanting to give Dom0 access to internet to only a specific IP Address.
This is to enable functionality that I need to look at and test.
What's the easiest way to do this?
Do I pass it through a ProxyVM that has rules for only the one IP that it's
allowed to access?
Or is there a
I don't know if this is related to your issue, but I have gotten two network
manager icons in the panel when trying to create a second usbvm. Not sure what
exactly happened but it was due to that usbvm i was trying to create and add a
pci controller to. Even though it was not the ethernet
entr0py:
> Andrew David Wong:
>> On 2016-06-08 00:14, Albin Otterhäll wrote:
>>> I'm assuming that if you connect to Tor using the same Whonix
>>> gateway (e.g. "sys-whonix"), you get the same "identity" (IP, etc.)
>>> on both your workstations. Is this correct?
>>
>>
>> Not entirely. By default,
On Thursday, June 9, 2016 at 4:00:16 PM UTC-4, raah...@gmail.com wrote:
> On Thursday, June 9, 2016 at 12:01:34 PM UTC-4, Arqwer wrote:
> > Documentation says, that there is a possibility, that other OS will infect
> > /boot. What if I completely rewrite my hdd during os change, like , boot
> >
Hello,
the Windows 7 standard VGA driver allows you to use such high values, but
this was not my question.
My question was if Windows 7 itself does support 4K displays by default. I
don't think it is a nice experience
to use Windows less than 10 with an 4K display with only 15" screen size.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On 2016-06-09 08:13, gaikokujinkyofu...@gmail.com wrote:
> I had problems with my cdrom drive, mainly that I could not get
> Qubes, or any other Linux, to see it. I didn't have much use for
> it before but now it is totally useless. Even before
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On 2016-06-09 08:00, Nicola Schwendener wrote:
> Hello all, I'm totally new to Qubes OS and I'm really fell in love.
> My 2 questions is about network connectivity. 1. there's a way to
> connect a switch with multiple VLAN in Trunk mode and let the
Hello,
yes, I normally clone one of the default VM's in the Qubes Manager. Which
opens a popup dialog to name your cloned template.
For example: fedora-23 -> clone to fedora-23-dev
Afterwards I tweak the templates for my development needs.
For example: Install my IDE, git etc.
At the last
Hello,
is a resolution of 2560*1400 and 300 dpi supported by Windows 7?
As far as I know it is difficult to use with Windows 7.
Best regards
J. Eppler
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop
Hello,
Mike Patton is right. Instead of blaming other people afterwards you should
have asked
before you do something.
Best regards
J. Eppler
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving
On 06/09/2016 06:21 AM, asdfg...@sigaint.org wrote:
On 06/08/2016 04:15 PM, asdfg...@sigaint.org wrote:
Hello
I read the guide on whonix site about how setup a VPN in workstation but
it is old and my VPN is a little different, it has a GUI interface but
also a setup for Open VPN (to work i
On 06/09/2016 11:45 AM, Jeremy Lator wrote:
Hello
To setup socks5 in network-manager openvpn do I have to go
advanced-->proxies and enter all the details?
Thank you
Yes, but I'd ask the NM folks about any issues with that.
Chris
--
You received this message because you are subscribed to
> On Thursday, 9 June 2016 08:22:44 UTC+10, boromi...@sigaint.org wrote:
>>
>>
>> I followed the user guide here for creating a usb VM because for some
>> reason qubes will otherwise automatically connect a possibly malicious
>> USB
>> to DOM0 for some unknown reason. My qubes is installed onto a
Hi!
Has anybody had success getting a Ubuntu template compiled? Even at 16.04?
Achim
--
You received this message because you are subscribed to the Google Groups
"qubes-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Am 09.06.2016 um 08:46 schrieb Drew White:
> On Thursday, 2 June 2016 21:24:02 UTC+10, Achim Patzner wrote:
>
> Is there a way to provide a virtual graphics card that will support
> 3840*2160 pixels? I'm having serious problem to see anything using a
> Windows 7 HVM at 257 dpi...
>
>
Am 09.06.2016 um 12:09 schrieb Andrew David Wong:
> On 2016-06-09 00:09, Albin Otterhäll wrote:
> > Is it considered god practice to only use copies of the default
> > templates?
>
> Yes.
There is some grey area around that. Some tools just have to be there
for you to feel well. In my case it's
Documentation says, that there is a possibility, that other OS will infect
/boot. What if I completely rewrite my hdd during os change, like , boot
from usb and do
dd if=windows_image of=/dev/sda
to run windows, and
dd if=qubes_backup_image of=/dev/sda
to return back to Qubes?
What if I will
On Thu, Jun 9, 2016 at 5:47 AM, Marek Marczykowski-Górecki <
marma...@invisiblethingslab.com> wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> On Thu, Jun 09, 2016 at 04:58:21AM -0300, Franz wrote:
> > On Wed, Jun 8, 2016 at 7:33 PM, Marek Marczykowski-Górecki <
> >
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
On Thu, Jun 09, 2016 at 06:20:51AM -0700, Marcus at WetwareLabs wrote:
> Hello everyone!
>
> What would be the steps for installing and trying out different Xen
> versions in Qubes 3.1? Or even switching to KVM? Shouldn't HAL make this
> possible
Hello everyone!
What would be the steps for installing and trying out different Xen
versions in Qubes 3.1? Or even switching to KVM? Shouldn't HAL make this
possible on Qubes 3.0+ ?
I'm mainly interested in testing Xen 4.3 branch, since there's anecdotal
evidence that something might have
On Thursday, June 9, 2016 at 7:33:14 AM UTC-4, @MarkMat320768 wrote:
>
> On Wednesday, June 8, 2016 at 6:49:16 PM UTC-4, Tibor Veres wrote:
> > the ram may be cheaper than you expect if you're willing to accept used.
> I recently bought 6x4g ddr3 ecc on ebay for ~$45
>
> nice! I wish I got
On Wednesday, June 8, 2016 at 6:49:16 PM UTC-4, Tibor Veres wrote:
> the ram may be cheaper than you expect if you're willing to accept used. I
> recently bought 6x4g ddr3 ecc on ebay for ~$45
nice! I wish I got it...I think it's pretty obvious this system can benefit
from a lot of good ram
Drew White:
> Min 256 for a ProxyVM (depending on how many firewall rules it will have to
> handle.)
I haven't done it myself, but wouldn't MirageOS for the firewall be a
good option here?[1] It's experimental, but Uncubed seems to be in a
desperate situation where this is could be considered a
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
On 2016-06-08 15:33, Marek Marczykowski-Górecki wrote:
> On Wed, Jun 08, 2016 at 08:44:11AM -0700, Andrew David Wong wrote:
>> On 2016-06-08 08:36, Andrew David Wong wrote:
>>> On 2016-06-08 08:21, Franz wrote:
Hello,
>>>
I noted that
On Wednesday, 8 June 2016 23:25:14 UTC+10, Marek Marczykowski-Górecki wrote:
>
> Just to make sure: it should be in /etc/dracut.conf.d
>
> Do you boot in UEFI mode? In such a case, initramfs is on ESP, not /boot
> directly. The path is /boot/efi/EFI/qubes/initramfs-KERNELVERSION, so
> you
On Wed, Jun 8, 2016 at 7:33 PM, Marek Marczykowski-Górecki <
marma...@invisiblethingslab.com> wrote:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA256
>
> On Wed, Jun 08, 2016 at 08:44:11AM -0700, Andrew David Wong wrote:
> > On 2016-06-08 08:36, Andrew David Wong wrote:
> > > On 2016-06-08
Andrew David Wong:
> You can simply clone one of the default templates. If you've already
> modified the default template you want to use, you can clone it, then
> reinstall it from the repo.
So it isn't possible to install and name the template in the same
command? Little easier and simpler to
On Thursday, 2 June 2016 21:24:02 UTC+10, Achim Patzner wrote:
>
> Is there a way to provide a virtual graphics card that will support
> 3840*2160 pixels? I'm having serious problem to see anything using a
> Windows 7 HVM at 257 dpi...
>
> Either install the tools and go Seamless, OR alter
On Sunday, 5 June 2016 19:20:43 UTC+10, unc...@sigaint.org wrote:
>
> On Sat, June 4, 2016 13:58, unc...@sigaint.org wrote:
>
> > On Sat, June 4, 2016 12:35, "Holger Levsen" > wrote:
> >
> >> did you try XFCE instead of KDE? XFCE is much more ressource friendly.
>
30 matches
Mail list logo