toby10;516369 Wrote:
> Make sure your Radio is connected to SBS 7.4, not MySB.
> Applets are on the beta-MySB (requiring beta SBS 7.5), not on the
> regular MySB (I think).I'm sorry, this is all new to me. Without instructions
> I'm lost. How do
I do that?
--
Wag
-
It was explained in another thread that the display dims slightly after
a certain time to preserve the life of the backlight. This only occurs
above a certain minimum brightness ( I believe 50% or so ) on the latest
firmware.
--
induna
---
eap;516584 Wrote:
> You are correct. And it makes no sense to dim a device that is plugged
> in.
I would think that if you're using manual brightness and have it set
below 100%, you could just bump up the brightness level a little and
achieve the desired results.
>From one of the developers on
JJZolx;516575 Wrote:
> Isn't the dimming on the Radio separate from the brightness control? I
> know it is on the Touch and that the user has no control over it. It
> still dims when using manual brightness mode.
You are correct. And it makes no sense to dim a device that is plugged
in.
--
aubuti;516566 Wrote:
> On the SB Radio menu select Settings > Brightness > Brightness Control >
> Manual Brightness.
> Then go to Settings > Brightness > Manual Brightness and set it to the
> desired level.
>
>
This only affects the overall brightness level. It does not control
the fact that
aubuti;516566 Wrote:
> On the SB Radio menu select Settings > Brightness > Brightness Control >
> Manual Brightness.
> Then go to Settings > Brightness > Manual Brightness and set it to the
> desired level.
>
> Btw, SBR is usually shorthand for the SB Receiver, not the SB Radio.
Isn't the dimmi
On the SB Radio menu select Settings > Brightness > Brightness Control >
Manual Brightness.
Then go to Settings > Brightness > Manual Brightness and set it to the
desired level.
Btw, SBR is usually shorthand for the SB Receiver, not the SB Radio.
--
aubuti
-
After about 15-20 seconds, the display on the SBR dims slightly.
I would like to keep it at full light level, especially
when trying the read the album cover from across the room. Is there
any setting to change this?
Thanks.
--
snowmanvt
wolfman69;516119 Wrote:
>
> ...So I got the huge speech this morning during breakfast "Why did you
> go spend all that money on a fancy dancy alarm clock that you can't even
> trust to go off in the morning???" Since my justification for getting
> the SB was that it would replace our current cra
OK - so now I don't know what is genuine advice and what is double
entendre!
--
stevedresden
stevedresden's Profile: http://forums.slimdevices.com/member.php?userid=36189
View this thread: http://forums.slimdevices.com/sho
doubleugk;516398 Wrote:
> The mentioned functionality is not working on my SBR? Do I need to
> enable something? If I press the knob, the active playlist shows up.
> Turning left/right doesn't affect anything.
Try spinning the knob a little faster, individual *clicks* won't resize
the art.
--
You might want to see if the same thing happens with a hard wired
connection. Just to rule out a problem with your wireless network.
--
agillis
rip, tag, get cover artÂ… All you do is insert the CD!
http://vortexbox.org
agillis
Lead Developer VortexBox
-
baldbear;516355 Wrote:
> I ordered the connector earlier this week, I'll post my results when I
> get it, (and I'll say how it works/is assembled). Those instructions on
> that other website are very poor, and abstract. I don't know why he
> didn't post a diagram of the wiring (besides the wiring
The Big Knob (tm) on the Radio should only be used for navigation.
The Big Knob on the boom should only be used for navigation.
Both have separate volume controls. Ok, the Radio is a more logical
Small Knob (tm), but the Boom's push button volume control is fine too.
I really don't care much f
The mentioned functionality is not working on my SBR? Do I need to
enable something? If I press the knob, the active playlist shows up.
Turning left/right doesn't affect anything.
--
doubleugk
doubleugk's Profile: http://f
stevedresden;516348 Wrote:
> Do you have to have a setting somewhere in the config to allow the
> transporter knob to change the artwork size?
>
> I can't find it anywhere and when I turn the knob whilst a track is
> playing - nothing happens to the artwork size
I assume you mean the Radio big
Wag;516279 Wrote:
> When I try to d/l new applets I get the circle animation forever while
> it says "Fetching new applets". I can go backwards and stop it, but
> every time I try to get new applets it does the same thing. Last time I
> tried getting new applets I let it go for 1hr. I know it sho
Ah..that explains it.
It would be nice to have, as quite often the artwork looks rubbish as
it's too big for the screen.
When is 7.5 scheduled for general release?
--
stevedresden
stevedresden's Profile: http://forums.sl
baldbear;516355 Wrote:
> I'll post my results when I get it, (and I'll say how it works/is
> assembled).
Thanks, earlier you mentioned you bought a pre-made pack of 10 cells.
I'll be interested in how difficult it was to get the NTC into the
middle of the pack.
Unless I get my orders before you
stevedresden;516348 Wrote:
> Do you have to have a setting somewhere in the config to allow the
> transporter knob to change the artwork size?
>
> I can't find it anywhere and when I turn the knob whilst a track is
> playing - nothing happens to the artwork size
I think this feature is only imp
I ordered the connector earlier this week, I'll post my results when I
get it, (and I'll say how it works/is assembled). Those instructions on
that other website are very poor, and abstract. I don't know why he
didn't post a diagram of the wiring (besides the wiring of the circuit).
--
baldbear
fragfutter;505771 Wrote:
> Since when is an ntp-client or an ntpd integrated in busybox?
I *meant* to say. that the particular device that was using
busybox/linux that was remotely similar to the squeezebox, ended up
getting an ntp client integrated into the firmware *not* that busybox
had one b
Do you have to have a setting somewhere in the config to allow the
transporter knob to change the artwork size?
I can't find it anywhere and when I turn the knob whilst a track is
playing - nothing happens to the artwork size
--
stevedresden
Am I the only one to experience this behavior? Looking that way so far.
I'll plan on calling the Logitech support line.
--
kitecarl
kitecarl's Profile: http://forums.slimdevices.com/member.php?userid=3017
View this thread
24 matches
Mail list logo
