ralphy wrote:
> The radio is the same
>
> run *crontab -e* and vi will be started
>
> press the letter *i*
>
> copy and paste the following line into vi.
>
> >
Code:
> > 0 5 * * * /sbin/reboot
> >
>
> press the escape key
>
> then type *:wq*
Thanks ralphy, custom firmware installed and working well so far.
I want to set up cron to reboot my radio every day but I'm not sure how
to do that with a busybox device. I'm was familiar with VI and full
blown UNIX cron and crontab -e (from many years ago!) but my poor old
brain isn't as agile
KeBul wrote:
> Bob, have you thought about a smart mains plug - search Amazon for smart
> plug, I use Teckin ones for various tasks, they can be configured to
> work automatically on a schedule, work with Alexa if you have an echo or
> via a smartphone app.
>
> A relatively cheap and simple re
ralphy wrote:
> Unfortunately the firmware needs to be rebuilt to enable cron in
> busybox.
>
> When I first enabled cron in the firmware, I setup a job to reboot the
> radio twice a month and within a few days of adding it I noticed that
> the radio had become really slow. At the time, I just
ralphy wrote:
> Just a quick update.
>
> I've been successfully using the new firmware for the last 6 weeks as
> the changes have progressed.
> I've updated the ssh client/server and wpa_supplicant components,
> enabled cron, applied a few bug fixes and native LMS 8.0 support.
> As I indicated
ed out the HH3 for a Netgear router - Netgear
WNDR4500 in my case as I have BT Infinity. Haven't had the problem
since!
Had other disconnection issues with the HH3 as well. It looks pretty
but does seem a bit (very?) flakey.
Bob
--
bobertuk
1 x Touch - SC 7.7.1 - SSOTS v4.14
1 x Radio
1
Have just been back in contact with Logitech Europe and the response
this time was much better. The support person I spoke to said the Touch
needs a warranty replacement so I've just forwarded all the details and
wait in hope :)
Bob
--
bobertuk
1 x Touch - SC 7.6.0 - SSOTS v4.91
1 x Ra
screen and wait for the applets to
install. Then I pull the power plug and leave it off for 10 minutes,
power back on all works OK.
I contacted Logitech support and they were not helpful. "It must be
because your are using SbS 7.6 which isn't an official release yet".
Well it is o
happens several times over (third
time for me in a month) and the service is lost for days at a time.
Anyway, this time it all started working again (for me in the UK) on
1st January. Hopefully this will be the last failure and Logitech have
put a viable solution in place. One can but hope...
ch copy over what you did with 'test.mysqueezebox.com'?
Whatever is happening, you (Logitech) need to do something quickly to
fix these problems. Users really will start deserting if not able to get
consistant & reliable service from their Squeezeboxes!!! It's been
happening constantly since Nov
Quoling;490906 Wrote:
> They might be aware but they haven't done anything
It's working for me in the UK since 10pm last night (21 hrs ago) and it
appears to be working for others too. It may be coincidence but
something may have been done by AndyG.
Bob
--
bobertuk
1 x Du
AndyG is on to it so logitec is aware of the problem.
Bob
--
bobertuk
1 x Duet - SC 7.4.2 - SSOTS v4.1
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.1.2 build 1014T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn Isobarik DMS
On my SB Controller and BOOM remote you can use the + button as well.
Bob
--
bobertuk
1 x Duet - SC 7.4.2 - SSOTS v4.1
1 x Boom
Lavry DA-10 DAC
QNAP TS-509 3.1.2 build 1014T
Starfish Pre-amp : Based on NAIM
Heavily modified NAIM NAP 250 Power-amp
Behringer DEQ2496
Linn Isobarik DMS
13 matches
Mail list logo
