Hello all,
I did another test and placed the SBR quite close to the router.
Assuming that a strong wifi signal would dominate the competing wifi
networks in the neighborhood. But unfortunately there is no difference,
after about 20 minutes the SBR lost the wifi signal. What really makes
me wonder
SlimChances wrote:
> EDIT: I think this is a different problem. My Radio will play internet
> radio streams(so wifi works) but not my local library. Will post in a
> separate thread.
Hi same problem here with 3 SBRs. I've tried it with a hotspot network
and after a short time the SBR looses con
>From my side, I can't confirm that a router with a lower wifi standard
would solve the problem. I tested it with a Huawei mobile hotspot and it
only takes 10-20 minutes before the SBR connection is interrupted. The
wifi icon is blue in this situation. When I restart, the SBR is
reconnected. When
I found something about the blue network icon in the users guide:
Connected to the network and waiting to connect
to a music source (such as SqueezeNetwork or
SqueezeCenter).
If you are attempting to connect to SqueezeCenter
and the light remains blue, the most likely cause
is a firewall run
I've found this in the user guide
Connected to the network and waiting to connect
to a music source (such as SqueezeNetwork or
SqueezeCenter).
If you are attempting to connect to SqueezeCenter
and the light remains blue, the most likely cause
is a firewall running on the computer on which
S
pfcs49 wrote:
> All four radios work on Ethernet.
> It doesn't matter what "range booster" "repeater" you use, I think. They
> receive the wireless/wifi signal and rebroadcast it as well as having an
> ethernet port for hardwiring. I am using two different ones. They are
> less than twenty bucks
edwin2006 wrote:
> Might specify your setup from LMS.
Have a look @my signature :)
ASUS P6-P5G41E W10 x64 1903 | LMS 7.9.2 - 1561016115 | 5 SB Radios | 1
SB Receivers | Squeeze Player 1.3.12 & Squeeze Ctrl 2.1.5
doubleu
Since a few weeks all my radios loose their names over and over again.
In general 1 SBR goes into reboot and after that some of the SBRs lost
their name and have the Name nil. What might be the reason for this?
ASUS P6-P5G41E W10 x64 | ASUS ZENBOOK W10 x64 | SheevaPlug Debian Wheezy
| pi0 Debi
I've figured out, that the odd behavior was caused by an improper start
of the LMS. There were no hints or errors, but accidentally I'd to
restart my pi twice and then KidsPlay was working as expected.
ASUS P6-P5G41E W10 x64 | ASUS ZENBOOK W10 x64 | SheevaPlug Debian Wheezy
| LMS 7.9 - 14811255
The problem vanished after some days. The only thing that I've changed
was to deactivate KidsPlay for this device, days ago. Inbetween I've
used the standard presets for the buttons. Today I've turned on KidsPlay
with the option "KidsPlay action or noaction".
Everything working as designed :-)
karlek wrote:
> Maybe you have assigned your action to the long pressed buttons on your
> LMS@raspbian?
But how can I do this? And as I mentioned on the other SBR it is working
fine!
ASUS P6-P5G41E W10 x64 | ASUS ZENBOOK W10 x64 | SheevaPlug Debian Wheezy
| LMS 7.9 - 1481125532 | 9 SB Radios
I'm using LMS@raspbian for testing purposes and configured Kidsplay for
all devices.
On my LMS@Windows I simply press a button and the processing of the
programmed action takes place (Play xxx favorite). When I do the same
with the same SBR while connected to LMS@raspbian, I need to press
firmly b
Hej,
any chance the get the visualizer plugin working for the radio?
In the code the radio isn't mentioned
'SCREENSAVER.visualizer_spectrum' => {
name => 'VISUALIZER_SPECTRUM_ANALYZER',
params => {
'transporter' =>
[$VISUALIZER_SP
Thx - I've changed the settings for my network card. Only magic packets
are allowed and everything else what could trigger a WOL is disabled.
Now it works.
ASUS P6-P5G41E W7 x64 | LMS 7.8.0 - 1370874416 | Perl 5.14.1 | SQLite
1.34_01 (sqlite 3.7.7.1) | Synology DS410j 4TB | 4 SB Radios | 2 SB
I have 2 SBRs from which both are connected wireless to my network. One
radio does wol the LMS, the other doesn't. As far as I know there is not
setting for wol in a radio. Any idea why this is the case?
Synology DS410j 4TB CPU 800 MHz RAM 128 MB FW 4.0 - 2198
Platform armv5tel-linux
Is there any chance to stream video to a SBR? Since LMS it should be
possible - shouldn't it?
--
doubleugk
Synology DS410j CPU 800 MHz Mem: 128 MB 4*1TB Seagate Barracuda
7200.12 SATA 3Gb/s FW DSM 3.2-1922 Platform armv5tel-linux
(MARVELL_88F6281)
SBS Version: Version:
e shutting down every night and waking up every
day 25 minutes before the alarm goes off. I assume that the SBR is
getting confused by this. I've tested a alarm later during the day,
after this behavior in the morning, and it works fine using a specific
playlist.
Any suggestions?
--
double
Test without factory reset and update to firmware 7.5.1-r9009 was
positive. Switching connection between LAN and WLAN works without
problems. So I believe it was a bug in the previous firmware.
--
doubleugk
Synology DS410j CPU 800 MHz Bus: 16...@ddr800 Mem: 128 MB 4
Seagate Barracuda
was
prompted to update the firmware to the latest version 7.5.1-r9009.
Maybe a possible connectivity issue was solved with this version. I'll
test a firmware update with my other radio and post the result here.
--
doubleugk
Synology DS410j CPU 800 MHz Bus: 16...@ddr800 Mem: 128 MB
I'd like to connect my SBR's via LAN cable. But the connection is not
possible, even when I try to assign the IP manually. The wireless
connection works without problems.
--
doubleugk
Synology DS410j CPU 800 MHz Bus: 16...@ddr800 Mem: 128 MB 4
Seagate Barracuda 7200.12 SATA
R FW 7.4.2 cannot connect at all. Error message DHCP problem. A
manual IP configuration gets it connected. Form me it's a bug too. Any
confirmations for this one?
--
doubleugk
Dell Dimension 9150 | Intel Dual Core 2,8 | 3 GB RAM | WIN 7 Ultimate 64
| ATI RADEON® HD3650 512MB | X-Fi Xtreme
Clock screensaver disappeared at my 2nd SBR too. This time I solved the
problem by syncing with my interims SBS 7.5.0 and then back to my
default SBS 7.4.1.
--
doubleugk
Dell Dimension 9150 | Intel Dual Core 2,8 | 3 GB RAM | WIN 7 Ultimate 64
| ATI RADEON® HD3650 512MB | X-Fi XtremeMusic
27;s
necessary to clearly identify the devices in the network.
--
doubleugk
Dell Dimension 9150 | Intel Dual Core 2,8 | 3 GB RAM | WIN 7 Ultimate 64
| ATI RADEON® HD3650 512MB | X-Fi XtremeMusic 2.18.0013 | Philips
37PFL7403 FullHD 1080p | Helium Music Manager 7 | SPDIF -> Proceed CDP
| Syno
How did you enter the command? That's the way I did it # hostname
SBR_Janke
--
doubleugk
Dell Dimension 9150 | Intel Dual Core 2,8 | 3 GB RAM | WIN 7 Ultimate 64
| ATI RADEON® HD3650 512MB | X-Fi XtremeMusic 2.18.0013 | Philips
37PFL7403 FullHD 1080p | Helium Music Manager 7 |
I'm able to change the hostname via SSH. But after the reboot the
default hostname "Squeezebox" is back. How can I make this change
permanent?
--
doubleugk
Dell Dimension 9150 | Intel Dual Core 2,8 | 3 GB RAM | WIN 7 Ultimate 64
| ATI RADEON® HD3650 512MB | X-Fi Xtreme
Is it possible to change the DHCP name for my SBRs? Right now the SBRs
appear as "Squeezebox" and "Squeezebox(2)" on the network monitor.
Maybe there is some kind of profile on the SBR, which I could change
via Telnet?
--
doubleugk
Dell Dimension 9150 | Intel Dual Core 2,
Chunkywizard;527175 Wrote:
> Hi there,
>
> ... Could it be you are using the Custom Clock applet and it needs to
> be reloaded?
>
> HTH
>
> CW
No, I'm using the available defaults for the screensaver.
--
doubleugk
Dell Dimension 9150 | Intel Dual Core 2,8 |
orked, was a downgrade to FW 7.4.2. I have 2nd SBR
running on FW 7.5.0 and that is still working fine. Bug?
--
doubleugk
Dell Dimension 9150 | Intel Dual Core 2,8 | 3 GB RAM | WIN 7 Ultimate 64
| ATI RADEON® HD3650 512MB | X-Fi XtremeMusic 2.18.0013 | Philips
37PFL7403 FullHD 1080p | Helium
I got rid of the update prompt on the SBR after disableing the auto
update setting on the SBS.
--
doubleugk
Dell Dimension 9150 | Intel Dual Core 2,8 | 3 GB RAM | WIN 7 Ultimate 64
| ATI RADEON® HD3650 512MB | X-Fi XtremeMusic 2.18.0013 | Philips
37PFL7403 FullHD 1080p | Helium Music Manager
Since March 12. each time I turn on the SBR I'm prompted to update my
firmware to 7.4.2. My SBR is already on 7.5.0. How can I get rid of this
update prompt?
--
doubleugk
Dell Dimension 9150 | Intel Dual Core 2,8 | 3 GB RAM | WIN 7 Ultimate 64
| ATI RADEON® HD3650 512MB | X-Fi Xtreme
I managed to update the SBR firmware to 7.5. Therefore I've setup a SBS
7.5 on my notebook and connected the SBR to it. After the update I
switched the connection back to my SBS 7.4. So far no compatibility
issues detected.
--
doubleugk
Dell Dimension 9150 | Intel Dual Core 2,8 | 3 G
, die SBR ID, welche ich über die Einstellungen der SBR
anpassen kann, auch als ID für das Netzwerk zu übernehmen oder kann ich
das in einem Profil des SBR über Telnet anpassen?
--
doubleugk
Dell Dimension 9150 | Intel Dual Core 2,8 | 3 GB RAM | WIN 7 Ultimate 64
| ATI RADEON® HD3650 512M
toby10;516718 Wrote:
>
> My Radio has the 7.5 FW so when it connects to my SBS 7.4.1 ...
How did you install the 7.5 FW on your radio. If I select update, it
tells me, that it's up2date.
--
doubleugk
Dell Dimension 9150 | Intel Dual Core Viiv 2,8 | 3 GB RAM | WIN 7 RC MCE
|
e default action. The following
plugins run on my SBR
- Kidsplay
- Album Flow
- Playlist Manager
And these apps
- Facebook
- Queen
- Sounds & Effects
- radio.de
Wasn't in the mood yet to reset everything, hence it's only
The mentioned functionality is not working on my SBR? Do I need to
enable something? If I press the knob, the active playlist shows up.
Turning left/right doesn't affect anything.
--
doubleugk
doubleugk's Pro
35 matches
Mail list logo