Hi ladis,
Mind if I play the GitHub bridge?
On 12/6/19 3:43 PM, Ladislav Michl wrote:
Add handler to write images using flashcp. Used to update barebox on at91
based board with dataflash.
Signed-off-by: Ladislav Michl
There we have all the checking and testing infrastructure. Patches via ma
On 10/14/19 3:47 PM, Yazdani, Reyhaneh wrote:
Hello everyone,
The RAUC documentation describes:
In RAUC, everything that can be updated is a slot. Thus a slot can either be a
full device, a partition, a volume or simply a file.
Now, I have two systems: system0 and system1, each of them define
Hi Patrick,
On 7/11/19 9:42 AM, Patrick Schneider wrote:
Hi there,
we are currently using RAUC in A + B mode with rootFS and appFS in each slot. So
far so good, integration worked and RAUC does its job in updating all the slots
and communicating with barebox. Now we wondered what is best prac
Hi Steffen,
On 4/24/19 4:17 PM, Steffen Kothe wrote:
Hello mailinglist,
Following error message occured after start of system.
Log output comes from systemd (rauc.service)
systemctl status rauc.service
Apr 24 13:48:43 pixi-cdl100 rauc[478]: Write error on
/dev/mmcblk3boot0: Operation not
Hi Michael,
On 2/21/19 11:09 AM, Michael Seidel wrote:
Hi Enrico,
that seems to be my problem. I've used the meta-rauc layer in the rocko version.
I've backported the fix to the rocko branch
(https://github.com/rauc/meta-rauc/pull/72) .
I'm going to finish the pull request after a little bit m
Hi Michael,
On 2/21/19 8:14 AM, Michael Seidel wrote:
Hello,
while trying to build my bundle I stuck at an error.
“bundle.raucb changed size while reading filesystem, attempting to re-read”
The raucb file indeed does grow and shrink in size all the time but the build
never finishes.
mksqua
On 8/2/17 5:54 PM, Jan Lübbe wrote:
Hi Caglar,
On Wed, 2017-08-02 at 11:53 +, Kilimci, Caglar wrote:
I have a question or a missing point. After the successful update, my
partition size is reduced. If I extend it, it would be as expected.
Like this:
Before update:
root@phyboard-regor-am335
Hi Andreas,
On 12/10/18 2:17 PM, Andreas Kurzkurt wrote:
Hi Enrico
As far as we can see now the RAUC client is working OK.
good to hear!
Thanks for your help. Maybe we have further questions in the future.
Just a short note as I am not sure if I've pointed that out explicitly
and for the
Hi Abhishek,
On 12/6/18 10:24 AM, Abhishek Kumar Rai wrote:
Hi Team,
Please provide your valuable suggestion regarding the above query .
please do not put too much pressure on community mailing lists.
There are business support channels available for this.
> > Extracting the tar's shou
Hi Andreas,
(please keep the list in CC)
On 12/7/18 1:18 PM, Andreas Kurzkurt wrote:
Hi Enrico
Now we are one big step ahead. We managed to compile the RAUC client.
But now we get an error message when we start the RAUC client.
Our Linux Distribution has no Systemd. The RAUC client should run
Hi Andreas,
(please keep the list in CC)
On 12/6/18 3:04 PM, Andreas Kurzkurt wrote:
Hi
At the moment we are struggeling to build the following two libraries that you
did not mention.
libresolv.so.2
ouhm, we do? Mabye it's a dependency of curl?
libjson-glib-1.0.so.0
First of all we are tr
Hi Andreas,
On 12/6/18 2:45 PM, Andreas Kurzkurt wrote:
Hello
We are trying to port the RAUC client to our OpenWRT system.
But we are facing many problems at this moment.
Our OpenWRT Version is „DESIGNATED DRIVER (Bleeding Edge, 12009)“.
Does anybody have experience in porting RAUC to another L
Hi Abhishek,
On 12/4/18 1:06 PM, Abhishek Kumar Rai wrote:
Hi Enrico,
Thanks for the prompt response!
Please find our responses inline (blue colored)
you're lucky that I've a graphical mailer... ;)
Better use standard mail quoting.
Our understanding of rauc install suggests that it does th
Hi Abhishek,
On 12/4/18 12:12 PM, Abhishek Kumar Rai wrote:
Hi Team,
To achieve a specific requirement for us the "rauc install" command won't work
i.e due to a configuration that we have the rauc install would fail. Though we would
still like to go ahead and flashload to that partition. We
Hi Abhishek,
On 11/20/18 11:15 AM, Abhishek Kumar Rai wrote:
Hi Team,
I want to use my_system.conf for my customized system.conf setting while
installing rauc bundle
{{{
root:~# cat /etc/rauc/system.conf
[system]
compatible=Eximius
bootloader=uboot
mountprefix=/mnt/rauc
statusfile=/factory/r
Hi Abhishek,
I fear I left this mail uncommented..
On 10/23/18 11:16 AM, Abhishek Kumar Rai wrote:
Hi Enrico,
Thanks for your prompt reply.
For us the 'realpath' command is working fine. The devices do exist at the
respective location. Below are the logs from our end for the post-boot scenar
end a Mail with subject 'subscribe' to
rauc-requ...@pengutronix.de.
Best regards
Enrico
BR
Taimir
________
From: Enrico Joerns
Sent: Tuesday, October 30, 2018 8:39 AM
To: Taimir Aguacil
Cc: rauc@pengutronix.de
Subject: Re: [RAUC] RAUC
Hi Taimir,
Hi Taimir,
On 10/29/18 11:27 AM, Taimir Aguacil wrote:
Dear RAUC team,
I attended the embedded Linux conference, and got to know you and see your demo
there!
There were still some few open questions that I am putting in this email. It
would be very helpful to get the answers.
Right now bund
Hi Abhishek,
On 10/18/18 1:02 PM, Abhishek Kumar Rai wrote:
Hi Team,
I am working on boot from a USB flash drive and try to flash the data
(rfs/appfs) to MMC partitions using RAUC. I am currently facing some issues on
the same. The same scenario works well when we boot from NFS and try to fl
On 10/18/18 9:07 AM, Abhishek Kumar Rai wrote:
Hi team,
One more point that i missed adding.
I am using BSP provided by our vendor and in that reboot and shutdown option
are not gracefully exiting.
They are giving kernel panic. There is only option to do power reset.
could this have any impact
Hi Abhishek,
On 10/18/18 8:51 AM, Abhishek Kumar Rai wrote:
>>For debugging, one can also take a look at the raw output of fw_printenv in
userspace
>>before and after performing mark-good to see if the variables changed
according to your expectation.
> It could also help verifying if the va
On 10/18/18 7:29 AM, Middelschulte, Leif wrote:
Hello Abhishek,
Am Donnerstag, den 18.10.2018, 10:46 +0530 schrieb Abhishek Kumar Rai:
Hi Team,
I am facing one issue after doing following steps:
1. flashing any image in appfs.
2. rauc status mark-active rootfs.0.(Activated rootfs.0)
Is this u
Hi,
we are (really) proud to announce that we've just prepared the first release
candidate for RAUC v1.0:
https://github.com/rauc/rauc/releases/tag/v1.0-rc1
This version adds several enhancements and new features concerning signing and
signature handling.
One of the most important improvements
Hi Dajalal,
On 10/1/18 12:33 PM, Djalal Harouni wrote:
Hi Rauc hackers, Pengutronix,
I am Djalal Harouni I met you guys at several conferences, I am one of
the maintainers of systemd project, linux kernel security contributor
etc.
We did launch a startup in Berlin opendevices.io/ and we are go
Hi Abhishek,
On 9/26/18 5:30 PM, Abhishek Kumar Rai wrote:
Hi Enrico,
Thanks for your prompt reply.
In my design , I have to do following things.
- Create a RAUC bundle consisting of App images and dbs -> ProductControl.bin,
Controls.bin, Operations.bin, ProductControl.db, Controls.db, Operat
Hi Abhishek,
On 9/26/18 1:59 PM, Abhishek Kumar Rai wrote:
Abhishek Kumar Rai mailto:abhish...@eximiusdesign.com>>
5:12 PM (16 minutes ago)
to rauc-request
Hi team ,
I am new to rauc .Please solve my query
I have written system.conf file
{{{
abhishek@abhishek-Latitude-5490:~$ cat sys
Hi Kevin,
On 05/17/2018 04:29 PM, Kevin Golding wrote:
Hello,
Am just getting my head around RAUC, and wondered if I'm right in thinking that
a rescue system is not included with RAUC? i.e. I would need to find or create
a small bootable rescue system that would run the RAUC update command sa
Hi,
we are proud to announce that we've just released RAUC v0.4:
https://github.com/rauc/rauc/releases/tag/v0.4
Beside a few fixes, this version provides some useful new features such
as atomic bootloader updates for eMMC, a central storage location for
the RAUC system status information and
Hi,
we are proud to announce that we've just released RAUC v0.3:
https://github.com/rauc/rauc/releases/tag/v0.3
Again, we have worked a lot on stability and support for more and more
use cases. RAUC now supports pure UEFI-based booting on x86, multiple
board variants in the same bundle, inter
Hi Kevin,
On 12/16/2017 03:19 PM, Kevin Chen wrote:
Hi everyone,
I use RAUC on my iMX6 platform. I added handler config option in
/etc/rauc/system.conf file.
[handlers]
pre-install=/preinstall
install=/install
The preinstall and install are shell script file.Then I install bundle
test it.The
Hi,
On 12/05/2017 05:46 PM, Laurent GUILLIER wrote:
Hi,
first of all thanks for Rauc which is a very nice piece of software!
I am now trying to use rauc on a imx6 target, along with hawkbit as the
update server. Everything runs fine, except that after the reboot
following the successful slot
Hi,
we are proud to announce that we've just released RAUC v0.2:
https://github.com/rauc/rauc/releases/tag/v0.2
This release contains a bunch of enhancements provided by the community
over the last months. Beside a number of bug fixes, error handling
improvements and a significant documentati
Hi,
On 09/15/2017 08:44 AM, Aditya Purohit wrote:
Firstly I want to thank team RAUC for good documentation and supportI am
working on beaglebone with debian jessie and I am facing a couple of issues.
Firstly, I am able to update my appfs using rauc but update for rootfs
is failing with the fo
Hi Caglar,
On 07/12/2017 01:21 PM, Kilimci, Caglar wrote:
Hi all,
I have been using RAUC and it is fantastic.
Normally, my system has two root file systems and install other part and
reboots. Nothing special, neither handlers nor hooks. But I have wondered, if I
create a bundle that contains
On 03/13/2017 05:08 PM, Enrico Joerns wrote:
[...]
LOG of
./rauc info -d update.raucb
Domains: 'rauc'
rauc-Message: Reading bundle: update.raucb
rauc-Message: Verifying bundle...
3069734912:error:2E09D06D:CMS routines:CMS_verify:content verify
error:../crypto/cms/cms_smime.c:393:
(
Hello Martin,
On 05/18/2017 11:45 AM, Martin Hollingsworth wrote:
Hello RAUC Team,
I am currently implementing software update on my embedded target and
evaluating the usage of RAUC. But I have trouble finding a solution for
the following scenario, which needs a little explanation, but can be
s
Hi Leif,
On 05/11/2017 12:29 PM, Middelschulte, Leif wrote:
Hello Enrico,
Am Mittwoch, den 10.05.2017, 15:22 +0200 schrieb Enrico Joerns:
Hi Leif,
On 05/04/2017 04:33 PM, Middelschulte, Leif wrote:
Now, about my second question: How does a custom hook script
communicate its progress back
Hi,
we are proud to announce that we've just released RAUC v0.1.1:
https://github.com/rauc/rauc/releases/tag/v0.1.1
This is mainly a bugfix release. We also introduced a CHANGES file that
allows you to track the project development from a more high-level
perspective:
http://rauc.readthedocs
Hi Leif,
On 05/04/2017 04:33 PM, Middelschulte, Leif wrote:
Now, about my second question: How does a custom hook script communicate its
progress back to the install-handler (i.e. rauc service)?
I'd go modify rauc's update_handler.c, set the G_SUBPROCESS_FLAGS_STDOUT_PIPE
flag for the spawne
Hi Leif,
On 05/09/2017 11:40 AM, Middelschulte, Leif wrote:
Hi,
I was wondering about the 'file' slot type.
Though it's mentioned in the tests, `rauc bundle` complains about an invalid
manifest.
Entries like '[file.uctrl]' within the manifest lead to failure during
compilation, while '[imag
Hi Leif,
On 04/26/2017 06:03 PM, Middelschulte, Leif wrote:
Hi,
I want to flash a µCtrl, as part of a "Install group" using RAUC and (if
necessary) a custom Handler (?).
Looking at
https://github.com/rauc/rauc/blob/master/test/install-content/custom_handler.sh
I was wondering about the prog
Hi Philip,
On 04/25/2017 03:43 PM, Philip Downer wrote:
After seeing a presentation on RAUC at FOSDEM I've been looking to
integrate it with a Yocto based i.mx6 embedded system that I'm working on.
great to hear that it inspired you to start working with RAUC.
Everything is pretty much worki
On 04/10/2017 12:51 PM, caglar.kili...@accenture.com wrote:
Hi,
-Original Message-
From: RAUC [mailto:rauc-boun...@pengutronix.de] On Behalf Of Enrico Joerns
Sent: Monday, April 10, 2017 1:14 PM
To: Kilimci, Caglar
Cc: rauc@pengutronix.de
Subject: Re: [RAUC] RUAC service
Hi,
(rauc
Hi,
On 04/10/2017 11:29 AM, caglar.kili...@accenture.com wrote:
On 04/10/2017 10:40 AM, caglar.kili...@accenture.com wrote:
Hello all,
I get GLib-GObject-CRITICAL warning or error while staring RAUC service:
# rauc -d service
Domains: 'rauc'
(rauc:537): rauc-DEBUG: service start
(rauc:537): r
Hi,
On 04/10/2017 10:40 AM, caglar.kili...@accenture.com wrote:
Hello all,
I get GLib-GObject-CRITICAL warning or error while staring RAUC service:
# rauc -d service
Domains: 'rauc'
(rauc:537): rauc-DEBUG: service start
(rauc:537): rauc-DEBUG: No mount prefix provided, using /mnt/rauc/ as
defa
Hi Caglar,
On 04/05/2017 03:10 PM, caglar.kili...@accenture.com wrote:
Hello,
I have a question about storage type, NAND. The documentation [1] emphasizes
not to use NAND flash but why?
> [1] http://rauc.readthedocs.io/en/latest/updating.html?highlight=nand
well, this is a general advice, n
Hi,
please keep the mailing list in CC so everyone could benefit from our
discussion :)
On 04/05/2017 01:40 PM, dilip yadav wrote:
With your kind help, Ihave successfully updated the minimal rootfs with
rauc.
I have following concerns:
1.How can I automate the "rauc status mark-good", What if
Hi Dilip.
On 04/05/2017 12:29 PM, dilip yadav wrote:
Hi Team,
I am following your example in the docs for grub bootloader on x86_64
debian machine.
i have created the rootfs image and trying to update the system via:
rauc -d install update-2015.04-1.raucb
It throws an error :
Domains: 'rau
Hi,
On 04/05/2017 07:08 AM, gurpartap singh wrote:
Hi Enrico,
I am facing problems with D-Bus service.
1. Error creating proxy: Error calling StartServiceByName for
de.pengutronix.rauc: Timeout was reached
D-Bus error while installing `/home/rauc/update.raucb
yes, we discussed this issue on t
Hi,
On 03/09/2017 12:13 PM, gurpartap singh wrote:
I installed RAUC with --disable-network option because of libcurl dependency
issues.
I have done below steps so far:
Created manifest.raucm like this
[update]
compatible=rauc-demo-x86
version=2015.04-1
[image.rootfs]
sha256=4c03d5be6780e64a604
Hi Caglar,
On 02/28/2017 03:24 PM, caglar.kili...@accenture.com wrote:
I tested and still receive error. Output is:
# rauc install update-2017.02-1.raucb
Error creating proxy: Error calling StartServiceByName for de.pengutronix.rauc:
GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Lau
Hi Caglar,
On 02/28/2017 01:27 PM, caglar.kili...@accenture.com wrote:
Hi all,
First of all thank you such an amazing product. I am really happy to found it.
thank you, too. I hope it will help you solving the update challenges of
your device.
I have been working on an embedded device whi
Hi,
On 02/23/2017 04:03 PM, Martin Hollingsworth wrote:
Hello folks from the RAUC team,
I came across the RAUC project when researching embedded linux update
mechanisms. Your tool looks very promising, so first of all thumbs up
for the great project.
many thanks and great to hear that you are
Hi,
we are proud to announce that we've just released RAUC v0.1.0:
https://github.com/rauc/rauc/releases/tag/v0.1
This is the first release of the RAUC project, thus listing feature
changes is not useful yet.
Instead we would like to say thank you to all contributors, users and
community me
54 matches
Mail list logo
