THOMSON ELITE POST has been SOLD.
On Jun 26, 11:29 pm, Rod C rodc...@gmail.com wrote:
Selling a couple things.
1. black Thomson Elite seatpost
27.2mm x 330mm
no setback
excellent condition
$75 shipped
2. Selle An Atomica LD Watershed
Mahogany with brass rivets
Congrats on your new SH!
To my knowledge the largest hammered Honjos are only 43 mm wide. I
have a set on my AHH with 32 mm Marathons. They are just wide enough
to be fully functional. My Jack Browns or 35 mm Marathons fit but
aren't super functional in that the fender doesn't cover as well
Rex, Congratulations from another recent-new-Riv owner! You're going to love
your bike even more when you ride it. I agree with Jim about the hubs: I
mounted VO wheels (105 hubs, 130mm) in a Bleriot frame which also takes
135mm. There were no issues whatsoever. I just installed the wheel
There is also a 66 cm rambouillet frame and fork on Portland (OR)
craigslist for $1100.
On Jun 28, 11:01 am, James Warren jimcwar...@earthlink.net wrote:
Riv's measurements are C-T, so this would be the 63 cm. Let's say the
difference between C-C and C-T were 1.5 cm. (That's just an estimate
Congrats to you on your new ride. I learned today that my frame is in
transit from Waterford to Riv right now and the end to my nearly unbearable
wait is near. I am so excited I can barely stand it.
Make sure to get some pictures posted of yours.
--
You received this message because you are
hi eric-
did you ever end up selling your AHH? what size is it?
thanks!
eli
On May 8, 4:48 pm, Eric ericwolfo...@gmail.com wrote:
Bump w/ price drop...$1300
Thanks!
- Eric
On Apr 28, 10:00 pm, Eric ericwolfo...@gmail.com wrote:
It got flagged again for some reason but it's
I was faced with the same issue when building my Sam. I went with the
Phils, 36s, and a 7-speed DuraAce FW with absolutely no regrets. When
you amortize the extra $$$ over the life of the bike it amounts to
chump change. You have to decide whether a year from now you'll be
saying I should have
I've got some 700x32's tucked under VO's 45mm hammered fenders and
they fit fine on my Hillborne. I tried to fit a 40mm tire in there
and it was a no go so you would need larger then 45mm fenders. I took
a measurement of the frame and the front fork right around where my
fenders sit and it's
VO's got some in 52mm although they aren't hammered.
On Jun 28, 11:33 pm, Benedikt neutralbuoya...@comcast.net wrote:
I've got some 700x32's tucked under VO's 45mm hammered fenders and
they fit fine on my Hillborne. I tried to fit a 40mm tire in there
and it was a no go so you would need
Rex.
Phil hubs are the best money can buy. I tried a set of budget wheels when I
was first indroduced to the Riv ride. My first Riv a 650b Saluki w. a budget
wheelset. Although the ride was very impressive it didn't take off till a
year later when I had a 8 speed Phil wheelset built. I
Hey Eli, I recently posted it on eBay and it did sell but the buyer
soon flaked claiming mystery illness and phantom pains.
So, it is still available it's currently up on Chicago's Craigslist
w/ info photos.
Thanks!
- Eric
On Jun 28, 9:20 pm, ekoral eko...@gmail.com wrote:
hi eric-
did
PS - The price is $1200 too.
On Jun 28, 9:20 pm, ekoral eko...@gmail.com wrote:
hi eric-
did you ever end up selling your AHH? what size is it?
thanks!
eli
On May 8, 4:48 pm, Eric ericwolfo...@gmail.com wrote:
Bump w/ price drop...$1300
Thanks!
- Eric
On Apr 28, 10:00 pm, Eric
Solid, thank you!
I think it's going to come down to the Longboards vs. Berthouds then.
--
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To view this discussion on the web visit
Congrats! Re-spacing 130mm Shimano hubs to fit 135 frames is pretty
easy--my local shop switched axles for me for under $20.
But if you want a set of MUSA shiny cassette hubs, get a set of White
Industry's. Nice hubs and one of the less expensive domestically produced
boutique hubsets out
I don't see it on CL. What size is it?
--
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To post to this group, send email to rbw-owners-bunch@googlegroups.com.
To unsubscribe from this group, send email to
OK... time out... WHO HAS A HONEY B17 for sale, and what is the
price... please?
Thanks,
BB
On Jun 29, 1:16 am, Adam oceanm...@gmail.com wrote:
Sorry eflayer. I have a honey flying in from the midwest, didn't see
your offer until too late. I do like those local exchanges.
Best,
Adam
On
me. b17, honey, black rails, small rivets, used but no issues.
$75 shipped.
--
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To view this discussion on the web visit
https://groups.google.com/d/msg/rbw-owners-bunch/-/DXkNwJcY8w8J.
To post
http://chicago.craigslist.org/chc/bik/2463889990.html
On Jun 29, 9:06 am, R Gonet richard.go...@earthlink.net wrote:
I don't see it on CL. What size is it?
--
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To post to this group, send email
Hi Matthew, thanks for the feedback on the Surly tensioner. Hopefully there
were no accidents resulting from it falling off. I'd hate to see that
happen while under load!
On Mon, Jun 27, 2011 at 8:06 AM, Matthew Snyder mwsny...@gmail.com wrote:
Hi David,
I used the Surly chain tensioner and
Just for reference i have 48mm (i'm pretty sure) fluted VO fenders and
i had to squeeze them at the chainstay a bit to get them to fit. I
think 50mm, you might need to snip a little bit off. on my fenders
i'm running 37mm tires that measure out closer to 35mm, i think 40mm
on mine would be
Hi all,
I have a dumb question, i have a kalloy seatpost (i think it's the
cheapie s83), it's a single bolt. For the life of me i cannot get
this thing tight, i crank it down to what i think is tight, but the
rear of my brooks will dip within about 10 miles. When i look at the
post there are
64cm orange Ram on the 'bay,
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemitem=250845914584+clk_rvr_id=244748878602
Fine looking bike.
On Tue, Jun 28, 2011 at 5:16 PM, redsydude thaus...@q.com wrote:
There is also a 66 cm rambouillet frame and fork on Portland (OR)
craigslist for $1100.
On
Here's my view on the SKS/Esge Longboard fenders.
I have 38mm Schwalbe 650b's on my 54cm AHH with 45mm SKS/Esge Longboard
fenders. Tight fit, but it works; not sure I would try it with 40mm tires.
Adjustment is pretty easy, but takes a long time to tweak it to precise
tolerances so it stays
Let me know, I need it to expand the available cockpits on my Blériot.
Thanks,
Brett
--
You received this message because you are subscribed to the Google Groups RBW
Owners Bunch group.
To view this discussion on the web visit
https://groups.google.com/d/msg/rbw-owners-bunch/-/vli18S0VN6wJ.
To
Anybody hear anything?
On Tue, Jun 28, 2011 at 12:12 PM, Allingham II, Thomas J
thomas.alling...@skadden.com wrote:
I sympathize. I did the same for 8 days, but curiosity finally trumped
caution. I was the last one in the pool.
Sent from my iPad
On Jun 27, 2011, at 7:50 PM, Pondero
on 6/29/11 6:20 PM, Minh at mgiangs...@gmail.com wrote:
I have a dumb question, i have a kalloy seatpost (i think it's the
cheapie s83), it's a single bolt. For the life of me i cannot get
this thing tight, i crank it down to what i think is tight, but the
rear of my brooks will dip within
Use some Locktight next time.
On Jun 29, 9:01 pm, cyclotourist cyclotour...@gmail.com wrote:
Hi Matthew, thanks for the feedback on the Surly tensioner. Hopefully there
were no accidents resulting from it falling off. I'd hate to see that
happen while under load!
On Mon, Jun 27,
27 matches
Mail list logo