[RBW] Re: Help me build my new Roadeo. Part I, Wheels.

I suspect most of us have only used the old Phil freewheel hubs, so can't comment on the new stuff. I'm sure they're strong, but hoo boy the cost-to-weight ratio is ugly for the cassette version. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch"

[RBW] Re: Nutmeg Nor'Easter

Man that sounds like a fun time!!! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group,

Re: [RBW] HHH Run?

Ride 35-38mm tires. Bike height will drop. More SO clearance that way, -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: PSA: 55cm Cheviot for sale in Sacramento area

I don't understand why a Riv owner - a notoriously reliable bunch for knowing their stuff - doesn't understand the drivetrain on the bike, nor explains the very noticeable tire mismatch. In the long run I don't actually care - anybody can sell a bike any way they want - but it popped up here

Re: [RBW] Re: My Big Green Tractor

Just paint the head tube yellow and you are good to go. Or, repaint the bike Deerescheme and have John Deere painted on the DT. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from

[RBW] Re: Tapping DT cable stops

I have a similar problem: My bije has cable stops on the DT and I wish there was an adapter one could put over a cable stop so you could use downtube shifters over the stops. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe

[RBW] Re: Tapping DT cable stops

This doesn't sound like a good idea to me. Have you seen Jagwire "Mickey" adjusters? -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group

[RBW] Re: FS: Riv HHH Tandem (small)

Besides posting the HHH here, you might try putting up a post on tandem classifieds or the tandem club classifieds (if you haven't already). Just a thought... you'll probably get more of a response here, but

Re: [RBW] HHH Run?

My PBH is just shy of 77cm (just under 30in) and there is absolutely no extra room for stand over... I even lean the tandem a bit when stopped to keep me comfortable (and that's with 42mm tires). It only works because we both dismount at stops. It's truly too large for someone of my height and

Re: [RBW] Re: My Big Green Tractor

AndI thought this thread was going to end up here: http://album.writeintent.fastmail.fm/pictures/dbapexcomplete1.jpg (Peter Moore's erstwhile John Deere green Diamond Back Apex.) Jeff Hagedorn Los Angeles, CA USA -- You received this message because you are subscribed to the Google Groups

Re: [RBW] Re: My Big Green Tractor

I thought this thread was going to end up here: https://bikeindex.org/bikes/29804 -J -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: WTB: hub area bags

acquisition pending -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to

Re: [RBW] HHH Run?

I could probably survive with a stand over of close to 30” but, with a tandem, wouldn’t I want some more? To be able to dismount more easily? Feels like it would be a lot to handle. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To

[RBW] Re: PSA: 55cm Cheviot for sale in Sacramento area

I don’t understand that sentence but the rest of the ad seems pretty normal and straightforward to me. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [RBW] Clean way to mount USB light to front rack?

In addition to those listed on Minoura's website, Minoura also offers this , that I used to clamp on my right fork blade to mount my battery-powered light on. The clamp is similar to that used on Spur Cycle's bell, so it's secure. On Monday, October 22, 2018 at 4:23:36

Re: [RBW] Re: Clean way to mount USB light to front rack?

Tom and Erik: Thanks. No front rack, alas, and no stem, just a "mast" with clamp on top for bar. (Dahon Hon Solo folder.) On Mon, Oct 22, 2018 at 5:28 PM Erik Wright wrote: > I've used a wine cork as a mount by strapping the USB light's strap around > the cork and attaching it to the rack.

Re: [RBW] HHH Run?

I'm height challenged with a 79 PBH, and the small fits using fatty rumpkin tires. The standover is not bad with a cm or two to spare (my 54 AHH has less standover), but the bottom bracket is fairly low. I don't have issues with it, but I could see where it might cause issues. Toshi On Mon,

Re: [RBW] Clean way to mount USB light to front rack?

Excellent; thanks. I like the headset spacer. Problem solved. On Mon, Oct 22, 2018 at 5:23 PM 'Eric Norris' via RBW Owners Bunch < rbw-owners-bunch@googlegroups.com> wrote: > Minoura offers many options for doing this: > > http://www.minoura.jp/english/accessory/accessory.html > > --Eric Norris

[RBW] Re: Clean way to mount USB light to front rack?

Cool idea! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to

[RBW] Re: Help me build my new Roadeo. Part I, Wheels.

I don't know the Quill, but have been really happy with my set of TB14s. For me, they've been what you were asking about: light-ish and fast. Plus they do look snappy. This wheel set has been on two bikes-- an Appaloosa for commuting and around town, and a Sam for open road and gravel.

Re: [RBW] Clean way to mount USB light to front rack?

Thanks! I knew I'd seen something like this before. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post

[RBW] Re: HHH Run?

I am just under 5'4" and ride as captain on a small HHH with my stoker being 5'1". It is definitely a stretch (and the standover is VERY close - for me, not the stoker) and I wish that there'd been an "extra small" size. I was kind of hoping with another possible run there would be an

Re: [RBW] Clean way to mount USB light to front rack?

Patrick, for the situation you describe, if using a threadless stem, Paul offers a stem cap light mount. Nothing for quill stems though. Tom -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop

Re: [RBW] Re: My Big Green Tractor

Moving further from bikes, but this issue with Deere repairs is unsettling https://www.theguardian.com/environment/2017/mar/06/nebraska-farmers-right-to-repair-john-deere-apple -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe

[RBW] Re: My Big Green Tractor

"Nothing runs like a Deere". dougP On Monday, October 22, 2018 at 5:47:28 AM UTC-7, tc wrote: > > Though I wish I had one of these... > > [image: 1060_john_deere.jpg] > > > ...the closest I'll get is my 64 Toto Atlantis with 2.1 Nano's, which I > call my Big Green Tractor because, well, it's

[RBW] Re: Glue for headbadge?

thanks! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to

[RBW] Re: Clean way to mount USB light to front rack?

I've used a wine cork as a mount by strapping the USB light's strap around the cork and attaching it to the rack. This isn't my photo, but it's the basic idea. On Monday, October 22, 2018 at 6:42:45 PM UTC-4, ctifusion wrote: > > Hopefully an obvious solution here. Without a generator hub I'm

Re: [RBW] Clean way to mount USB light to front rack?

Minoura offers many options for doing this: http://www.minoura.jp/english/accessory/accessory.html --Eric Norris campyonly...@me.com @CampyOnlyguy (Twitter/Instagram) > On Oct 22, 2018, at 4:09 PM, Patrick Moore wrote: > > Hijacking

[RBW] Re: Help me build my new Roadeo. Part I, Wheels.

Thanks for all the feedback! There's a lot to think about here. I should have mentioned that I already have the tires I'll be riding -- Vittoria G+ Corsa Competition, 700c x 28. I really like them. Looks like no one has anything to say about the Phil hubs, which might be saying a lot. I

Re: [RBW] Clean way to mount USB light to front rack?

Hijacking the thread only very slightly: does anyone have ideas for mounting the Gino mount somewhere on or near the bar when you use a Moustache bar with no place to clamp a light on the bar itself, and no fork leg bosses? I've got mine bolted to the right fork leg dropout boss, but that's

[RBW] Re: PSA: 55cm Cheviot for sale in Sacramento area

My questions about the ad are crystal clear, and that quote doesn't answer them. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Glue for headbadge?

On Monday, October 22, 2018 at 3:13:32 PM UTC-4, Daniel D. wrote: > My roadini headbadge is a little loose with a gap on top.  What glue to use?   > > > It's almost done more test riding and then handlebar wrap Some clear silicone adhesive sealant like Permatex RTV works well and is easily

Re: [RBW] Help me build my new Roadeo. Part I, Wheels.

My Roadeo uses A23s with WI T11s, and I love them. The quill looks great (wasn't an option at the time for me), but no O/C rim, which doesn't detract much. I would also recommend the GB Cypress or Compass equivalent. I would recommend at least considering the EL version. I bought GB Cypress EL,

Re: [RBW] Clean way to mount USB light to front rack?

Get a Gino mount, which will put a “knob” on your rack that you can attach a light to. https://www.paulcomp.com/shop/components/gino-light-mount/ There are of course cheaper solutions out there as well, but the Gino is the gold

Re: [RBW] Got a SP hub! Works good.

“Issues with the plastic housing (durability)” Hi Tim, I have 4 data points on this issue. My 2 units of Luxus U broke off at the mounting holes, same from 2 of my friends. I now shifted to IQ-X and so far it is still ok. > On 22 Oct 2018, at 11:30 PM, Tim Gavin wrote: > > ssues with the

[RBW] Clean way to mount USB light to front rack?

Hopefully an obvious solution here. Without a generator hub I'm stuck using a USB light on the new Atlantis and I can't figure an easy way to mount it to the front rack as the mount is for handlebars. Not a huge deal but I like the lower light position and not looking at the ugly light when I

[RBW] Re: PSA: 55cm Cheviot for sale in Sacramento area

*Selling my Rivendell Cheviot mixte bike. It's in excellent condition; my wife used it a few times before she bought a Cheviot of her own (she needed a size smaller).* Seems crystal clear to the point of maybe even too much information necessary -- to me, anyway ... On Sunday, October 21,

[RBW] Re: Taking Clem to a different level

Saw this last week and it's even better looking in person. The reach doesn't feel as long as it looks in the pics. Definitely seems reasonable even for people with average torso length. I love the build and I wish all my bikes were that mustard color. Brynnar -- You received this message

[RBW] Re: Help me build my new Roadeo. Part I, Wheels.

My other bike has A23's and all Compass and GB and Pasela tires I have used auto bead seat upon first inflation. But I think the Brevets look nicer. The logo sticker is nice and minimal and the polished look is very bright and chrome-like. -- You received this message because you are

[RBW] Re: Glue for headbadge?

Use some silcone, or shoe goo, whatever you've got around. And if you're not wanting to make a mess, mask off the edges with blue painters tape first, blob in the glue, press it so it oozes out the edge a bit, wipe the ooze clear, then peel the tape for a clean edge (while the glue's still

[RBW] Re: Help me build my new Roadeo. Part I, Wheels.

I have two wheelsets with the polished TB14s. All 32h. Great rims, definitely recommend those. Go with some Ultegra or DA hubs if you can find a suitable pair in silver/polished that supports 11spd. They are tough to beat. Some polished White Industries hubs would be my pick if there was extra

[RBW] Re: Glue for headbadge?

I read that too but that gap between the frame and badge is bugging me. Also I'm worried about it flying off eventually. Easiest fix seems to shoot some glue in there. On Monday, October 22, 2018 at 12:54:09 PM UTC-7, Lum Gim Fong wrote: > > Others in the know can chime in but i thought i

[RBW] Re: Have a Sub 20lb Roadeo?

Oops Tektro R539 brakes. And forgot to mention Selle Anatomica X2 saddle on a Kalloy rivstock seatpost. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Glue for headbadge?

Others in the know can chime in but i thought i have read that they are put on with double sticky cushioned tape. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an

[RBW] Glue for headbadge?

My roadini headbadge is a little loose with a gap on top. What glue to use? It's almost done more test riding and then handlebar wrap -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving

[RBW] My Big Green Tractor

Oh, and fantastic build on the Atlantis! Ready to ride in all conditions! With abandon, Patrick -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] My Big Green Tractor

Ha! You over estimate me, Tom. I plow through snow, but I’ve not plowed snow. Grin. I think of my Hunqabeam as a mountain horse (a la Man from Snowy River) and my Quickbeam as a thoroughbred, though I ride both in/through the snow. It will be an interesting test this winter, presuming we get

[RBW] PSA: Roadini Deal for Smaller Rider

Dang, good deal -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to

[RBW] PSA: Roadini Deal for Smaller Rider

Not mine... but wondering if I could shrink to fit for a great deal! https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F332849902983 Karl in Nashville -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To

[RBW] Re: One month VO Touring rear hub review.

I like the noise as safety feature and sounds so nice so I am not oiling the pawls. But good to know if I ever decide to. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it,

[RBW] Re: Have a Sub 20lb Roadeo?

Guess I should chime in now that I own one. This build minus saddle bag, minus the chainstay bartape wrap, plus a Secula plus seatstay dyno light is 22.9lbs.: https://flic.kr/p/2abdqa7 In comparison, my Carbon/Aluminum 2009 Defy 3 was 20lbs, iirc without pedals. So not sub 20lbs. But looks

[RBW] Re: FS: Riv HHH Tandem (small)

hah, mine lives in my tiny hallway of a kitchen, too. luckily my gf loves it enough for this to be OK. g l w s On Saturday, October 20, 2018 at 9:46:46 AM UTC-7, David Crowell wrote: > > Due to life changes, this bike has barely been ridden. It's a small size > (Grant's recommendation: I'm

[RBW] Re: New "Hill" Bike is Posted

There's not much else to say 'til we see feelers about production and deposits. I'm interested, but the bike isn't really going to be a thing until next year. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group

[RBW] Re: New "Hill" Bike is Posted

Wow. This thread died. Lack of interest in the Boots? Anyone heard the details on what’s being changed? I wanna want one. Clayton DDD -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving

[RBW] Re: Help me build my new Roadeo. Part I, Wheels.

check out velocity Quill. they are polished silver rims which are nice and somewhat light. H Plus Son archetype also a good option that comes in polished. as for hubs, just get 105 5800 hubs in silver. they work & look fine. unless you want to spend $500+ on a hubset, then pick your poison

[RBW] Re: Taking Clem to a different level

"Dirty Clem" I dig it. On Monday, October 22, 2018 at 11:07:31 AM UTC-4, Matt Argomaniz wrote: > > Hell yeah! You've satisfied my need to see a clem with a dirt drops. I'm > calling it a dirty clem. > > On Friday, October 19, 2018 at 6:23:50 AM UTC-7, Christopher Wiggins wrote: >> >> I've been

[RBW] Re: Help me build my new Roadeo. Part I, Wheels.

IMO, you cannot go wrong with TB14 rims. They are beautiful and bomb-proof. My LBS is a big fan. As for your hub choices, again either one is a winner unless you are trying to shave off some weight as you suggest. Those rims with either hubs would be (for me) about the most beautiful

Re: [RBW] Re: One month VO Touring rear hub review.

I second Igor's recommendation; too much grease can gunk up the pawls. A light oil is better than grease. If you use grease, use a small amount. I have about 1500 miles on my VO touring hub, with zero problems. On Fri, Oct 19, 2018 at 7:23 PM Ash wrote: > Have this hub on my Joe A. 14

[RBW] HHH Run?

Looks like there may be another run of the HHH tandem, maybe possibly. Man, if they could do the Gus Boots curved top-tube to increase the standover for smaller riders (5'4"), I'd seriously consider buying one, hanging it in my basement and awaiting the growth of my kids. -- You received

Re: [RBW] Got a SP hub! Works good.

They do. The B Luxos U has a built-in capacitor that holds the charge. The capacitor was added to regulate the voltage for the USB-charging function. But it also allows the light to hold on to a small charge when you pedal below the charging threshold. The Luxos U LEDs can provide some light

[RBW] Re: Taking Clem to a different level

Hell yeah! You've satisfied my need to see a clem with a dirt drops. I'm calling it a dirty clem. On Friday, October 19, 2018 at 6:23:50 AM UTC-7, Christopher Wiggins wrote: > > I've been wanting to do something special with a Clem. Here's a little > write up about a build I just finished. I

[RBW] Re: FS: Riv HHH Tandem (small)

Yep, it's a deal, but I also know that selling niche market bikes like this is difficult. On Saturday, October 20, 2018 at 3:57:24 PM UTC-4, Max S wrote: > > Omg, this is an amazing deal. We love ours - ride it with wife and kids... > so much fun! > > - Max “idontneedtwotandemsbutmaybe...” in

[RBW] Re: One month VO Touring rear hub review.

Hey Lum! Glad to hear you're enjoying the hub! We suggest using a light oil over grease for the pawls. The reason being is that the grease has a tendency to make the pawls stick to the freehub body and prevent proper engagement. It isn't a big deal off the get-go and probably won't be a big

[RBW] Taking Clem to a different level

Awesome! Looks like a Hellava good time. I want to do that, but the Clem being my only bike (for now) I’ll have to wait. I love my boscos. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving

[RBW] Re: What epoch of Rivster are you?

I'm guess I'm a "Golden Ager" by default. I cut my cycling teeth riding Bridgetones that Grant designed, but my only Rivendell has been a blue 64cm Rambouillet that I found in semi-rough cosmetic shape at Bicas, our local co-op, earlier this year. I couldn't (and still can't) believe my luck.

[RBW] Re: Help me build my new Roadeo. Part I, Wheels.

The quote above from a wheelbuilder kept me away frim getting Mavic rims. I got Pacenti. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Help me build my new Roadeo. Part I, Wheels.

“I stopped using Mavic rims a few years ago. For ages they were my go to, but recently they've shipped most production to China and Taiwan, and many builders including myself have seen premature failures even on their toughest rims. ” -- You received this message because you are subscribed

[RBW] Re: FS: Parts Bin Clean Out - Some good stuff!

PM sent Rusty On Monday, October 22, 2018 at 12:30:59 AM UTC-4, Keith Muller wrote: > > Update: > > Photos: https://drive.google.com/open?id=0B-2NeF-6iHHVLTY4NDlpcmJta2c > > Items for sale: > > **Shimano CX70 Brakeset - Sold > **White Industries Square Tapper BB 68x113mm - Sold > **Paul Comp

[RBW] Re: Help me build my new Roadeo. Part I, Wheels.

We have an early '80s Trek 613 in the collection. It's a relaxed frame road bike. It has regular, not oversized, Renolds 531 tubes and was built in the USA. In short: a light tubeset, fully lugged. In many respects I think it is like the Rodeo design-wise. It is the daily rider for one of my

[RBW] Re: Bike sizing by PBH, and wanting to give drop bars one more chance

Hey, I just used round spacers, like you described, from a local Ace Hardware, that way I didn't have to do any extra drilling! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from

[RBW] Re: Help me build my new Roadeo. Part I, Wheels.

I've had great success with Mavic Open Pro rims over the years and would recommend them. They can be purchased in a variety of weights and colors, including silver (they do come with quite a few decals on them, however, but you can remove those if you don't like the looks). The ones I've used

Re: [RBW] Help me build my new Roadeo. Part I, Wheels.

I'll bet you could get that same "excited" feeling with your GB Cypres by inflating them up to 80 psi. On 10/22/18 9:37 AM, Lum Gim Fong wrote: PS- and I ride GB Cypres 700 x 30 tires, which measure 31-32mm wide on these brevet rims at 60psi. For a more “excited” feeling ride (but no faster)

[RBW] Re: Drop Bar Mixte? Yves Gomez/Betty Foy Geometry?

Thanks for this Justin. I had a feeling there were different sizes per run. I have a 60cm from the earlier run I believe, but the headtube is really tall so it effectively fits like a larger bike, which is good for me. I'll give the MAPs a try, should be here shortly, and try out some drop bars

[RBW] Help me build my new Roadeo. Part I, Wheels.

PS- and I ride GB Cypres 700 x 30 tires, which measure 31-32mm wide on these brevet rims at 60psi. For a more “excited” feeling ride (but no faster) try 32 Paselas tour guard. They rode nice too. More “excited” feeling. Maybe more vibration? Better tread protection. The GB Cypres is a calmer,

[RBW] Help me build my new Roadeo. Part I, Wheels.

if your experience turns out like mine, the ride quality of the Roadeo will blow away all of your other rivbikes. You will probably pick the Roadeo for 95% of rides, even for commutes, like I do. Seriously think about a dyno hub on the front wheel. If you decide on dyno lighting I would go for

[RBW] My Big Green Tractor

I just finished building up my new-to-me 65cm Clem H, which is as much of a tractor bike as I could imagine! Lovely ride on one of the first decent fall days here in Austin. https://instagram.com/p/BpN5bwmB2Wv/ Reid -- You received this message because you are subscribed to the Google

[RBW] Help me build my new Roadeo. Part I, Wheels.

I personally would go for either Shimano or Campy hubs, with either the TB14 or Pacenti Brevet, 14/15 db spokes. Quiet, smooth, reliable, light. Royce hubs are nice, too. Note that with 11 so, the cog spacing is pretty well identical between Shimano & Campy.

[RBW] Help me build my new Roadeo. Part I, Wheels.

Hello, I’m the proud owner of a beautiful, new-to-me Roadeo frameset that I recently purchased here from another group member. My plan is to take my time building it up over the course of winter, with a May 1st goal of getting it out on the road. As I am also the proud owner of a few