Hi all,
First, thank you all for your ideas and feedback, the Clem is now
shifting/holding gear a *lot* better and any issues with getting to a gear
are my own now. For posterity's sake in case some one does a search in the
future, I just wanted to follow up with what I ended up doing.
To
Did you use an M6 screw? I had the same issue attempting to mount a
different rack to my Clem as the screws were M5s. The M5s some what held,
but it was really just paint holding them in.
On Monday, February 8, 2016 at 8:16:43 AM UTC-5, Joe Bernard wrote:
>
> Whelp, I installed my Pletscher
Try mounting it on the braze ons higher up on the seat stays. Those are
actually M6 as well. That is where I mounted a Nitto Mt Campee, albeit I
had to mount it to the inside, but it was no biggie. I also found when
attempting to use M5 bolts and jury rigging on the dropouts that the
Hi all,
I was lucky enough to get one of the complete Clems and have been able to
put about 250mi on it so far. Around the middle of December I had a couple
of experiences where the chain seemed to slip when peddling and under load.
This is my first friction shifting bike, so I thought it