Re: [RBW] Re: F.S. Jeff Lyon 54cm L'avecaise frame and fork

1 at 4:00:52 AM UTC-8 Lester Lammers wrote: > >> Good morning Nick, >> >> The chain rings are 44 and 36. Pics of crank and brakes attached. >> >> Regards, >> >> Les >> >> On Sun, Feb 14, 2021 at 7:09 AM Lester Lammers >> wrote: &

Re: [RBW] Re: F.S. Jeff Lyon 54cm L'avecaise frame and fork

y 10, 2021 at 1:08:07 PM UTC-8 Lester Lammers wrote: > >> I won't be building this up, so it's time to let someone put miles on it. >> It's an off the peg unfiled fillet brazed frame. There is a small chip at >> the top of the seat tube. Brazed-on center pull for Compass brak

Re: [RBW] Hi & Questions...

I see that James at Analog Cycles, a Riv dealer, also has Kona bikes. Given the images above, I'd email him before you decide. My 2 cents. https://analogcycles.com/ On Saturday, December 26, 2020 at 9:47:26 AM UTC-5 philipr...@gmail.com wrote: > Still chewing on this cud! When I spoke to

Re: [RBW] Hi & Questions...

I see that James at Analog Cycles, a Riv dealer, also has Kona bikes. Given the images above, I'd give him a call before you decide. My 2 cents. https://analogcycles.com/ On Saturday, December 26, 2020 at 9:47:26 AM UTC-5 philipr...@gmail.com wrote: > Still chewing on this cud! When I spoke

Re: [RBW] Leah’s Rivendell Raspberry Platypus

Wow, HarLeah Davidson got a swell new bike. On Friday, November 27, 2020 at 11:50:09 PM UTC-5 Matthew Williams wrote: > Fantastic job, Leah. It's beautiful. I love the fender-mounted taillight > with the concealed wiring. > > Could you explain the Microshift thumbies a bit more--setting them up

[RBW] Re: Mercian Vincitore

With that head tube, I'd guess that it was a custom frame. I had a King of Mercia years ago and it was a fine ride until it and I were hit by a car. There may be a serial number on the bottom bracket and I think Mercian may be able to shed some light on the head tube. On Friday, May 1, 2020 at

[RBW] Re: Drop bar on MIT Atlantis?

This may of interest: https://www.analogcycles.com/product/analog-wright-stem/ On Wednesday, February 26, 2020 at 7:00:13 AM UTC-5, John G. wrote: > > I have a bunch of parts in need of a 700c frame, so I’ve been pondering my > next build. I miss my old Atlantis, though I traded it for my

[RBW] Re: Thinking about cycling for me in the future....

I'm 67 and am in Florida, the number one state for bike fatalities. I just ride defensively and try to anticipate what a motorist might do. It's not difficult to plan a ride when the traffic is minimal. On Thursday, January 30, 2020 at 7:34:28 PM UTC-5, PG wrote: > > I'm turning 67 in a week,

[RBW] Re: Can we talk about long wheelbases?

You can't expect the LWB Rivs to handle like a sport or racing bike. They don't and weren't designed to. They are different. I have a MIT Atlantis and it is unlike any bike I have owned. I was not sure what to expect but once I got it dialed in it's a joy to ride. Horses for courses. On

Re: [RBW] Re: Can we talk about long wheelbases?

On Wednesday, January 8, 2020 at 12:15:45 PM UTC-5, Kurt Henry wrote: > > BBDD, I think I've followed along in this thread and a few other related > ones, but to make sure I'm with you: the two bikes in your photo are both > set up for you to ride vs. one of yours and one set up for someone

[RBW] Re: Can we talk about long wheelbases?

I agree Joe. I may have just been lucky. I would NOT have bought it if I had to put it on a train or a bus. On Monday, January 6, 2020 at 10:26:39 AM UTC-5, Joe Bernard wrote: > > "The problem is that we cyclists have a hard time wrapping our heads > around change." > > The problem - such as

[RBW] Re: Can we talk about long wheelbases?

I have a 53 MIT Atlantis and it is the most comfortable bike I have owned. The problem is that we cyclists have a hard time wrapping our heads around change. On Monday, January 6, 2020 at 7:44:51 AM UTC-5, scott minor wrote: > > Great topic! As a tall guy with a 95cm PBH, I LOVE the new found

[RBW] Re: Aero Albatross

I have these on a MIT Atlantis with Billy bars. I get 3 positions with them. http://velobase.com/ViewComponent.aspx?ID=6dfccf4e-6cc7-4ae2-a975-10c1df2be28d=118 On Tuesday, December 3, 2019 at 5:07:35 PM UTC-5, A. Douglas M. wrote: > > Has anyone had any luck putting aero extensions into

[RBW] Re: New vs. old Homer geometry, ride characteristics

You need to ride one and decide. That is the only way to know what YOU prefer. The new Homer has lighter tubing than your Sam and the longer stays should make for a comfy ride. On Friday, November 15, 2019 at 10:50:01 AM UTC-5, Jason Fuller wrote: > > Hi all, I apologize if this has been

[RBW] Re: Make my AHH look less tempting!

I agree. Velo Orange has skewers that use a unique allen wrench. I have them on my Atlantis. Those or something similar and a good lock should keep it safe. On Friday, September 27, 2019 at 4:49:30 PM UTC-4, Sean Steinle wrote: > > Definitely don't uglify it. I mean, half of what you pay for in

[RBW] Re: Film cameras on bike rides?

I'd keep it in a small Pelican knock off case from Harbor Freight. The range finder prisms are fragile. As Eric said, *"I dropped a Leica M4 from a few inches, and ended up with a $175 repair when the old glue inside gave way."* On Friday, June 28, 2019 at 10:39:56 PM UTC-4, Philip Williamson

[RBW] Re: Good Problem to have? FS/FT

I agree with Bill and Eamon. I must say that I really enjoy my 53 MIT Atlantis. The ride with the LWB is wonderful. On Wednesday, June 26, 2019 at 12:42:49 PM UTC-4, Bill Lindsay wrote: > > The answer is obvious. Keep them both. I think they are significantly > different from each other, even

Re: [RBW] Saddles for wet butts

Riv has Aardvark saddle covers, they work and are less $ than another saddle. On Monday, June 24, 2019 at 2:01:41 AM UTC-4, Joe Bernard wrote: > > Or just cover your trusty leather saddle. 10 miles is too long for me to > fake it, I gotta have my B17. -- You received this message because you

Re: [RBW] Saddles for wet butts

Covering it with a plastic bag would help too. On Monday, June 24, 2019 at 12:15:24 AM UTC-4, Drw wrote: > > Thanks Dave. This is great Info and what I was hoping to hear. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe

Re: [RBW] Re: FS: MIT Atlantis 53cm

FWIW, I have a 53 MIT Atlantis. I'm 5' 71/2" 82 ish PBH 71 cm saddle height 110mm stem with Billie Bars. Riv recommended a 50 but I told Will that most riding will be on the road and went 53. Glad I did. I can still use drops with a short stem. Stand over is fine and the bike feels perfect.

[RBW] Re: New to me Appaloosa Joe!

On Tuesday, May 21, 2019 at 9:42:00 PM UTC-4, Nick Morehouse wrote: > > Re-posting because I typo'd Rivendelland I'm a little OCD lol. > > After over 7 years of following Rivendell, and spending countless hours on > this site, and any other that is even remotely related to Riv and Rivish >

[RBW] Re: New bike woes - Albatross bars and Brooks B17 Special saddle

In summary, there is a seat for every butt but butts are different. On Wednesday, May 8, 2019 at 7:53:07 PM UTC-4, Tim Bantham wrote: > > In referring back to the original post I too had a similar dilemma. I ride > a Sam with an Albatross and a Appaloosa with Billie's. I had a B-17 on > both. I

[RBW] Re: New bike woes - Albatross bars and Brooks B17 Special saddle

I had issues with a Berthoud Aspin on my MIT Atlantis with Billie bars. I got a Brooks Cambium C-19 carved. Problem solved. On Monday, April 22, 2019 at 3:01:51 PM UTC-4, Kevin Lindsey wrote: > > At the risk of sparking disagreement, I think the problem lies with the > B17 saddle which, in my

[RBW] Re: Dealing with Rust

I'm in Florida where wood rusts. I use Corrosion-X. It works. http://www.corrosionx.com/ On Wednesday, May 1, 2019 at 12:13:40 PM UTC-4, Drew Henson wrote: > > > I noticed the other day a few small rust spots on my ~6 month old MIT > Homer. One, in the pic below, on the seat stay lug. A little

[RBW] Re: New Here. I am thinking of selling my Betty Foy, any advice on value?

Perhaps simply get used to getting off the saddle when you stop? Just a little behavior modification. Saddle? They are personal but I put a carved Brooks Cambium C-19 on my MIT Atlantis and it is perfect. I had a Berthoud Aspin on it. A great saddle but not on this frame for me. On Saturday,

[RBW] Re: Front Rack For Big Wald Baskets

I have a 53 MIT Atlantis with the large Wald basket on a Soma Demi porteur. Works great and the fit was perfect. I have not seen the new Riv basket rack. On Friday, April 5, 2019 at 12:31:53 AM UTC-4, Joe Bernard wrote: > > I've used both SOMA racks. The big one works and looks great, but it's

[RBW] Re: Rivendell tinkering..

1997 picture...priceless. :-) > 1997: https://www.flickr.com/photos/24722971@N05/4354670656/ > > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Swaping one Riv for another

FWIW, I was at the top of the PBH range of the 50cm MIT Atlantis and the bottom of the 53cm. I went with the 53 and am glad I did. I am using Billie bars and the longer TT of the 53 is just right. I can also use drops with a short stem. I'd call Riv and discuss sizing with them because at some

Re: [RBW] Re: 25th Anniversary Riv

Agree. The MIT Atlantis is very versatile. Very much and all rounder. On Sunday, February 3, 2019 at 3:49:20 PM UTC-5, Bill Lindsay wrote: > > Multiple people said they would buy a drop bar mountain bike that takes > Thunder Burt’s. > > I’m digging my Thunder Burt drop bar Rivendell. It’s a MIT

[RBW] Re: Joe Appa vs. new Atlantis?

*As Bill said: The 53 Atlantis and the 51 Appaloosa are darn-near identical. * I went with the 53 Atlantis and am glad I did. I'm at the bottom of the PBH range and the fit, for me, is perfect. On Saturday, January 26, 2019 at 3:39:19 PM UTC-5, Doug Van Cleve wrote: > > Howdy folks. > >

Re: [RBW] Gus Boots Willsen on Shell Ridge

It's hard to wrap your head around the long chainstays but the ride is sublime. On Wednesday, January 16, 2019 at 12:15:39 AM UTC-5, Patrick Moore wrote: > > I have to admit that I am very tempted to try one of Riv's long-wheelbase > bikes on dirt roads and paths; it's probably just age. But

[RBW] Re: Self-diagnosed Riv addicts (some) since 1994.

I rode a Rossin Record for 20+ years. Nice stage racing frame. Around 2008 I decided I wanted a fatter tire roadish bike. Something more practical but not a MTB. I'm not sure how I stumbled on Riv but I got a 55 Bleriot, loved it and miss it. I have a 53 MIT Atlantis that is my all rounder and

[RBW] Re: Self-diagnosed Riv addicts (some) since 1994.

I rode a Rossin Record for 20+ years. Nice stage racing frame. Around 2008 is decided I wanted a fatter tire roadish bike. I'm not sure how I stumbled on Riv but I got a 55 Bleriot, loved it and miss it. I have a 53 MIT Atlantis that is my all rounder and it fits better than any bike I have

[RBW] Re: FS: New small khaki saddle sack

Sold. On it's way to Brooklyn, NY. Right across the bridge from Chinatown. On Sunday, January 13, 2019 at 10:42:41 AM UTC-5, Lester Lammers wrote: > > New, never used. $135 OBO shipped to the lower 48. > -- You received this message because you are subscribed to the Google Groups &qu

Re: [RBW] Atlantis touch-up paint, Testors #2135 Russian Naval Interio r

Me too. Just search Testors 2135. On Sunday, January 13, 2019 at 3:18:51 PM UTC-5, mike goldman wrote: > > I got mine on ebay > > Avoid Botox: How To Remove Eye Bags & Wrinkles In 1 Minute > Fit Mom Daily >

[RBW] Re: FS: New small khaki saddle sack

Message not received. I sent you an e-mail. On Monday, January 14, 2019 at 7:11:42 AM UTC-5, Kainalu V. wrote: > > Hi Lester, in case that earlier message didn't make it through, my email > ---> kaivierstra at gmail dot com > -- You received this message because you are subscribed to the

[RBW] Re: FS: New small khaki saddle sack

Those are shadows in the pics, not stains. On Sunday, January 13, 2019 at 10:42:41 AM UTC-5, Lester Lammers wrote: > > New, never used. $135 OBO shipped to the lower 48. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group.

Re: [RBW] Re: New bike day. 56cm 650B Atlantis

miles on it for > sale if anyone wants one :-) been meaning to get a proper listing together, > but haven't done it yet. > > Hugh Flynn > Newburyport, MA > > On Sun, Jan 13, 2019 at 9:52 AM Lester Lammers > wrote: > >> I wanted a MIT Atlantis and Riv recommended a 50.

[RBW] Re: New bike day. 56cm 650B Atlantis

I wanted a MIT Atlantis and Riv recommended a 50. I told Will that I would not be using it as a single track but as an all rounder with some light trails. I'm at the top of the 50 PBH range and the bottom of the 53. I got the 53 and it is the best fitting bike I have owned. Hope this helps. On

Re: [RBW] Re: How to select a Brooks saddle

It's a Nylon cover but I would not label it as slick. Me likey. On Wednesday, December 19, 2018 at 2:22:26 PM UTC-5, Tim Gavin wrote: > > Brooks seems to have evolved the fabric top a bit. More/slicker rubber > coating? > > On Wed, Dec 19, 2018 at 1:13 PM Hoffsta > > wrote: > >> I tried an

Re: [RBW] How to select a Brooks saddle

I have a C19 carved on my 53 MIT Atlantis and love it. I had a Berthoud Aspin with the cutout on it but the C19 is much better on this frame for me. Bike Tires Direct has the C19 with cutout for $87.50 and free shipping. Riv does not carry it. On Monday, January 7, 2019 at 10:43:24 AM UTC-5,

Re: [RBW] Re: Atlantis and Hillborne

the long wheelbase sounds fun. > > On Tue, Jan 8, 2019 at 4:56 PM Lester Lammers > wrote: > >> I have a 53 MIT Atlantis w/ Bille bars but could use drop bars with a >> short stem. I'm at the bottom of the PBH range. Enough top tube clearance >> for the j

[RBW] Re: Ultra Romance and his Rivendell Atlantis.

Jeremy. Is that the LA River in your bike pic? On Monday, January 7, 2019 at 5:27:50 PM UTC-5, Jeremy Till wrote: > > I've been riding a long chainstay Rivendell > > > with fancy Shimano v-brakes, double

Re: [RBW] Re: Atlantis and Hillborne

I have a 53 MIT Atlantis w/ Bille bars but could use drop bars with a short stem. I'm at the bottom of the PBH range. Enough top tube clearance for the jewels The fit is perfect. I don't think it is as nimble as a Hillborne but the cloud like ride is exceptional. My heels would never touch a

Re: [RBW] Re: Atlantis and Hillborne

I agree. I have a 53 MIT Atlantis w/ Bille bars. I'm at the bottom of the PBH range. The fit is perfect and the ride is exceptional. On Tuesday, January 8, 2019 at 12:00:35 PM UTC-5, Hugh Flynn wrote: > As a recent newbie to LCS (long chainstay) bikes, all I can say is try it. > > It's

[RBW] Re: Perplexities regarding flat tires

You may want to check out tire liners because boys will be boys. http://mrtuffy.com/ -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: WTB: Nitto Hi Riser stem

Try this to compare stems: http://yojimg.net/bike/web_tools/stem.php On Wednesday, December 19, 2018 at 8:32:19 AM UTC-5, Conway Bennett wrote: > > I'm looking for a nitto hi riser for an experiment. On my Quickbeam I > have sim works get around bars on a 10 cm tallux stem. I feel a little >

[RBW] Re: Appaloosa vs road bike - (pointless) 19 mile commute time comparison

Agreed. My 53 MIT Atlantis is set up similarly. No hole shot demon but it is a joy to ride. On Thursday, November 15, 2018 at 12:58:30 AM UTC-5, Ash wrote: > > Thought's I'd post some real world data related to speed/weight > correlation. > > I was able to wrap up work a bit early yesterday

[RBW] Re: Packing and/or shipping bike damage: Any strategies for successful resolution?

The shop was negligent. They packed it and I assume that you paid for the service. No physical damage to the box indicates the packing was not adequate.. On Tuesday, October 9, 2018 at 10:41:00 PM UTC-4, tc wrote: > > I guess there is a first time for everything. The beautiful, pristine Sam >

[RBW] Re: New SimWorks rack

It look a lot like the Soma Demi Porteur rack. I have one on my MIT Atlantis. Perfect fit. It was designed to fit Riv fork bosses. https://www.somafab.com/archives/product/demi-porteur-rack On Saturday, October 6, 2018 at 12:33:51 PM UTC-4, Justin, Oakland wrote: > This looks fantastic. > >

[RBW] Re: Dirt Drop Bar alternative to Cowchipper with 26 clam

Nitto has a couple of dirt drop bars. On Saturday, October 6, 2018 at 11:16:05 PM UTC-4, Jonathan D. wrote: > > Is anyone familiar with a good alternative to the Salsa Cowchipper Bar > with a 26 clamp? I like the cowchipper bars a lot and would like a similar > bar to use with my nitto stems.

Re: [RBW] Re: With respect to the Blahg post and the lack of influence....flat pedal resurgence

On Thursday, October 4, 2018 at 2:30:27 PM UTC-4, Patrick Moore wrote: > > > *I think that it was Grant who did the most to change all that, and that > he had a cultural (bike culture) effect that was both far earlier and far > more widespread than Surly or Jones. I'd even say that it was

[RBW] Re: Billie bar / choco bar

I like the Billie bar more than the Alba. More hand positions. I would not cut the ends until you use them stock a while. On Wednesday, October 3, 2018 at 1:45:07 PM UTC-4, J L wrote: > > Hello rivsters, > > I have been looking for a new upright bar. I love love love albatross bars > with the

[RBW] Re: Film Processing

Have you seen Kodachrome on Netflix? https://www.hollywoodreporter.com/news/netflix-s-kodachrome-was-inspired-by-a-headline-1104279 On Monday, October 1, 2018 at 5:24:57 PM UTC-4, Paul Richardson wrote: > i'm such a big fan of dwayne's photo in parsons, kansas, that i made a > pilgrimage.

[RBW] Re: The ups and downs of my Clem Smith Jr

The Billie bars may be what you are looking for. I tries several bars, including Bosco and Aherne+MAP, on my MIT Atlantis. The Billie bars stayed. YMMV. On Wednesday, September 5, 2018 at 4:51:21 PM UTC-4, Jim Bronson wrote: > > The good news about my Clem is that I've been riding it a lot more

[RBW] Re: Bar end shifters on Boscos?

IMHO, I'd try shifters on the stem. Handy and out of the way. Makes swapping bars and stem easy. I have Billie bars on my MIT Atlantis with Silver shifters + IRD stem mount. It's really personal preference. On Friday, August 24, 2018 at 3:59:58 PM UTC-4, Ash wrote: > > Having tried many alt

[RBW] Re: WTB 55cm Cheviot

Frame, fork, headset, bottom bracket, black scissors kickstand, Tektro LR brakes and Uno seatpost. $900 and split bike flights in the lower 48. I'm in Naples, FL. On Wednesday, August 22, 2018 at 10:24:03 AM UTC-4, Kristin wrote: > > Hi, all! A couple weeks ago I rode a Cheviot for the first

[RBW] Re: WTB 55cm Cheviot

Not sure Joe, depends on what goes with it. Andrew, I'm sending Kristin more pics and will post them here too. On Thursday, August 23, 2018 at 5:59:48 PM UTC-4, Joe Bernard wrote: > Lester, what's your price? I imagine several people will be interested. -- You received this message because

[RBW] Re: Grant is asking us to not run baskets on Nitto Racks

I have a SOMA demi Porteur with a medium Wald basket on an Atlantis. Supposedly has a 10kg capacity and comes with a Manny strap. On Tuesday, August 14, 2018 at 9:05:00 PM UTC-4, Adam Leibow wrote: > i wonder just how catastrophic or dangerous these rack failures are for > the rider. if you

[RBW] Re: MIT Homer pre-order

The longer chainstays will give you what you want. The AHH stays are 47.5cm. I have a 53 MIT Atlantis with 52cm stays. Cushy ride but still responsive. On Wednesday, August 8, 2018 at 1:22:07 AM UTC-4, Drew Henson wrote: > > I (pre)ordered one the other day. I’ve been wanting an an AHH for a

[RBW] Re: FS: 53 Bleriot

I sold mine and regret it. > > > Pics here: https://www.flickr.com/gp/70237737@N00/eba75i > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Billie Bars?

On Sunday, August 5, 2018 at 2:12:39 PM UTC-4, Justin, Oakland wrote: > > I would also consider a sweep bar like the Jones (loop or no loop), > MapAhearne or upcoming Wavvie (gravy?) bar. I find that my experience with > the *angle of Albatross grips is not conducive to the control I want when

[RBW] Re: Billie Bars?

If you think Albas would work on the Trek ,IMHO, Billie's are an improvement. I have them on a MIT Atlantis and like them a lot. You do get two good hand positions and possibly three. If they don't work on the Trek put them on your Joe. You may need a longer stem with them on the JA. My 2

[RBW] Re: N+4?

Sooner I hope. I really like mine. Lots of smile per mile. Methinks you will be smiling too. On Wednesday, July 25, 2018 at 2:35:39 PM UTC-4, Rod Holland wrote: > > Frame is shipping, wheelset is building, tires and tubes are in hand, as > are most of the other parts. *This may be a bicycle

[RBW] Re: new bike day!!

Very nice Adam. You may want to consider the Billie bars. More swept back than the Albatross and seem like they would be good with the longer ETT. On Wednesday, July 25, 2018 at 5:41:52 PM UTC-4, Adam Leibow wrote: > > hello fellow riv fans. i got a new riv on saturday and built it up on >

[RBW] Re: Brooks saddle turning into a banana

I keep plastic bags handy to fully cover the saddle in the rain. On Monday, July 23, 2018 at 11:59:13 PM UTC-4, Jim S. wrote: > > Hi all, > > I have been touring, and yesterday it rained quite a bit. My B17 seems to > have developed quite a curve, upsloping front and back, or sagging in the >

[RBW] Re: Anyone tried Brooks rubber Cambium bartape?

I like the Planet Bike gel tape. Cushy and no gooey residue when removed. About $15. On Wednesday, July 25, 2018 at 4:22:05 PM UTC-4, Lum Gim Fong wrote: > > I need cush. > > I like Lizard Skins the best for comfort but it is coming apart after less > than 1,000 miles, American. > > I used to

[RBW] Re: Help me diagnose chain slip cause?

Brett wrote: *The chain is not particularly worn (I don't have calipers, but it has at most a few hundred miles on it). It does have 6 or so extra links spliced into it using a second power link in order to accommodate the long chain stays.* The cassette appears to be in ok shape--no shark

[RBW] Re: Quick Ride in Santa Cruz While Travelling for Work

Nice terrain, says the guy near the pancake like Florida Everglades. On Tuesday, July 17, 2018 at 11:20:45 PM UTC-4, Collin A wrote: > > Its a quickie, but I managed to take my Clem out for a spin up in Wilder > Ranch just West of Santa Cruz. A combination of smooth graded fire roads on > the

[RBW] Re: 53cm MIT Atlantis built...almost

The long stem was necessary to get the bar 'right' and have three hand positions. Shortening them would, IMHO, reduce the utility. On Tuesday, July 17, 2018 at 3:19:53 PM UTC-4, ctifusion wrote: > > Looks great. I like the long stem. > > >> >> -- You received this message because you are

[RBW] 53cm MIT Atlantis built...almost

The image has a bit of perspective distortion and the bars look a bit weird. The fit is excellent. Billie bars with a 13cm Tallus gives me 3 usable hand positions. The Billie's have a lot of sweep and an appropriate TT length and longish stem, IMHO, is needed to not feel cramped. With a 82.5

[RBW] Re: New Bike Day!

Nice! Don't be late for dinner. On Tuesday, July 10, 2018 at 3:03:27 PM UTC-4, Rusty Click wrote: > > FEDX dropped off a pre-RAGBRAI package for me today. I carefully > unwrapped, assembled, and took some pics. > > Cant talk now, I gotta go ride! > > > > -- You received this message because

[RBW] Re: The "One Bike" for a featherweight?

Not MUSA or Riv but low trail and affordable. https://www.cyclestoussaint.com/collections/frames/products/velo-routier-2-0-650b-low-trail-frame-with-braze-ons MUSA https://groups.google.com/forum/#!msg/internet-bob/2_Zo8AMfQuE/EILtyZ7BCgAJ;context-place=forum/internet-bob IMHO, the Rivendell

[RBW] Re: choco norms

FWIW, I have used Albas and Choco norms. I don't believe there are three hand positions. A friend with a SH had Choco norms and he just went with a Noodle and prefers it. He used the Choco for a couple of years. I did not like the Choco's and prefer the Billie flipped. Bars are personal, like

[RBW] Chain length for long board frames

Straight from Sheldon Brown. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send

[RBW] Re: Want To Read (WTR): MIT Atlantis Rose Report and Comparisons

Agreed. On Monday, June 25, 2018 at 6:54:27 PM UTC-4, dougP wrote: > > Now I'm inspired. I had a nice 2 hr test ride on a 53 last week. Been > traveling & can't write too well on phone. Home soon so will post > impressions & comparison to my '03 58 Atlantis. > > BTW, *I'm calling the new ones

[RBW] Re: 53 cm LWB Atlantis test ride

Thanks for the report. I'll have my 53cm built up soon but not soon enough. > > > The executive summary is the bike rides fantastically. It really is > noticeably more supple and cushy than its predecessor. If you're on the > fence about whether the "new & improved" version is worth getting

Re: [RBW] Re: Anyone bought a 47 or 50 MIT Atlantis?

if you are are within 2 sizes. Thanks for the feedback :-) > > On 23 Jun 2018, at 5:02 AM, Lester Lammers > wrote: > > As long as you are OK with the stand over I'd say go for the 50cm. Riv > seems to going a bit smaller on frame size recommendations these days.The > SO on t

[RBW] Re: Stack and reach of 55 sizes of Appaloosa and (current) Sam?

This may help. On Saturday, June 23, 2018 at 3:33:50 PM UTC-4, Joe Bernard wrote: > > Ok so stack is vertical distance BB to top of headtube, reach is > horizontal distance BB to top of headtube. Is that right? -- You received this message because you are subscribed to the Google Groups "RBW

Re: [RBW] Re: Stack and reach of 55 sizes of Appaloosa and (current) Sam?

You're welcome. The numbers for the Sam are for the side pull frames. On Saturday, June 23, 2018 at 2:19:51 PM UTC-4, John W wrote: > > Thanks Lester. I didn’t know that existed! > > John > > On Jun 23, 2018, at 1:51 PM, Lester Lammers > wrote: > > Here you go. >

[RBW] Re: Cutting down Grip area of Albatross bars?

I had the same issue with an 80's MTB. I ended up putting the shifters on the stem. On Friday, June 22, 2018 at 3:19:31 PM UTC-4, phil k wrote: > > Yes it is. I rather like the bar ends on the upright bars though and they > keep hitting my legs. > > I tried measuring inside, but it's a bit

[RBW] Re: Anyone bought a 47 or 50 MIT Atlantis?

As long as you are OK with the stand over I'd say go for the 50cm. Riv seems to going a bit smaller on frame size recommendations these days.The SO on the geo chart for this frame is with the max tire size. My PBH is 82.5 is and they suggested a 50cm. I was at the top of the range for the 50

[RBW] Re: 59cm MIT Atlantis build and (short) ride report

> Looks mighty fine. What wheels are you using? I hope to have mine together > soon. > > On Thursday, June 21, 2018 at 4:35:23 PM UTC-4, ctifusion wrote: > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this

[RBW] Re: Cutting down Grip area of Albatross bars?

I'd call Riv and ask how much you can safely cut off and still use bar ends. On Thursday, June 21, 2018 at 10:35:58 AM UTC-4, phil k wrote: > > I didn't want to hijack Eamon's thread, but I was also curious about doing > this to Albatross. I currently have the HT aluminum version. > > Could I

[RBW] Re: Cutting down grip area of Choco bar?

I have Choco bars and did not care for them. There is very little sweep, I found that uncomfortable, and they felt like I was steering a tractor. The issue with bars is that what works for one person may not work for another. Personal preference rules here. What I thought would work from an

[RBW] Re: Notes on a new Sam Hillborne, Albastache handlebars, and on being "fast enough"

Great write up. > *I first built it with 44cm Noodles that I had on hand, but even with the > Riv-recommended 8cm stem (that I worried would be too short), I felt way > too stretched out and uncomfortable.* > I felt the same way about my 55cm Bleriot with a similar set up. My legs are

[RBW] Another Riv geometry chart

This one seems have disappeared from the Rivendell web site. -- You received this message because you are subscribed to the Google Groups "RBW Owners

[RBW] Re: New Atlantis! - First Riv

Congrats...great looking bike. I see that your canine friend approves too...smart dog. On Monday, June 11, 2018 at 12:42:21 PM UTC-4, Brian Reeves wrote: > > I've been lurking for quite some time here and have wanted an Atlantis for > a while too. Back in April, I put out a wtb post looking

[RBW] Re: 56cm MIT Atlantis

Looks great. My 53cm frame arrives tomorrow. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to

[RBW] Re: 650B Roadini build

Very nice. Great balance between comfort and performance. > > > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: What frame and build set make you a safer, slower rider?

> * I’m thinking either a Sam or Atlantis might fit the bill.* > I believe you are on the right track. A Sam would be a bit more nimble and you can get the bars up. That, IMHO, is #1 for city riding. I was at my LBS and a local engineer crafted a periscope like gizmo that mounted on drop

Re: [RBW] Jobst on short chainstays

I agree 100%. There is a lot of bike folklore out there. You won't be able to make a sharp U turn as easily but so what? On Monday, May 28, 2018 at 11:34:23 AM UTC-4, Hugh Flynn wrote: > > I picked up a gloriously long-stayed Appalloosa around the time the > new Atlantis was announced

Re: [RBW] GDMBR with Adventure Cycling

Sounds like a great trip.Cold and wet is not a great way to spend the day. I'd seriously consider something to fend that off. https://www.sierratradingpost.com/marmot-optima-gore-tex-pants-waterproof-for-men~p~6786n/?filterString=s~mens-waterproof-pants%2F#specsSection On Monday, May 14, 2018

[RBW] Re: New geometry charts available

I don't recall where but Grant said the new Atlantis and Joe A. were functional equivalents. So either would be fine with heavier loads. On Sunday, May 27, 2018 at 1:59:00 PM UTC-4, Jonathan D. wrote: > > I see the difference between the Sam and the MIT Atlantis. My Joe and Sam > ride very

[RBW] Re: Billie v. Albatross.

I ordered the bars too. *I* think/hope the 1" drop v. the 2" Albas will be what I want and I will try them flipped. Unfortunately, the only way to know if you will bond with a bar is to try them. On Thursday, May 24, 2018 at 8:56:18 PM UTC-4, David B wrote: > > Received my Billie bar today. >

[RBW] Re: 57 vs 61 Roadini

*I* would go for the larger frame for long term comfort and confirm the size with Riv. On Sunday, May 20, 2018 at 10:49:45 AM UTC-4, Dave Grossman wrote: > > Attention Roadini owners.can I have some feedback > > I am debating grabbing a Roadini frameset in the near future to fill the >

Re: [RBW] Billie Bar initial review

Great write up Adam. I may try them flipped to see if my 'forearms on the bars' power cruising theory has merit. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an

[RBW] MIT Atlantis frames have arrived at RBW

Got a voice mail from Dave that the frames are in and will begin shipping soon. :-) -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

Re: [RBW] Re: 26.0 vs 31.8

I am in the longer legs than torso group and was in between a 51cm 26" and 53cm 650B MIT Atlantis. I did not want 26" wheels. The stand over of the 53 works for me but my shorter torso and the longer top tube of the 53 was an issue for drop bars. The zero analog stem will allow me to use Nitto

[RBW] Re: RIV Catalog Arrived

I'm in Florida and received mine today. > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this

  1   2   >