[RBW] P-clamps or new Braze-ons for rear rack?

on it if I was commuting in inclement weather or embarking on a weekend tour. There are a few frame builders here in town I know could add new braze-ons for not too much $, but I don't want to go down that road unless I have to since it's considerably more permanent of an option. -

[RBW] P-clamps of new braze-ons for rear rack?

on it if I was commuting in inclement weather or embarking on a weekend tour. There are a few frame builders here in town I know could add new braze-ons for not too much $, but I don't want to go down that road unless I have to since it's considerably more permanent of an option. -

[RBW] Re: Camp Coffee/Coffee outside in Austin, Tx

asy to get down to Govalle park at the end of the confusingly-named Walnut Creek trail too. Mike On Thursday, May 18, 2017 at 9:35:26 AM UTC-5, Will Ashe wrote: > > Having recently relocated to Austin, I'm wondering if any Austinite > listers know of a camp coffee m

[RBW] FS: compass Barlow pass and little Big Ben tires

Big bens are sold -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-ow

[RBW] FS: compass Barlow pass and little Big Ben tires

Compass tires are tan sidewall. Have decent wear but life left in them. 75 shipped Little Big Ben are cream colored and have barley been ridden. 50 shipped Thanks! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this g

[RBW] Re: 2017 RAGBRAI

I'm signed up to do the whole thing. Never done it before, would welcome any advice. So far I've heard the most important thing is to take care of your rear end. I'll be on a blue Homer. Mike Austin, TX On Tuesday, May 2, 2017 at 4:47:30 PM UTC-5, Rusty Click wrote: >

[RBW] Re: Clem saddle OR saddles under 40$

Has anyone tried the VO microfiber saddles? How do they compare to an unpadded leather saddle (e.g. Brooks, Rivet, SA, etc.)? http://store.velo-orange.com/index.php/components/saddles/microfiber-touring-saddle-wide.html Mike On Thursday, May 4, 2017 at 9:26:49 AM UTC-5, Eli Queen wrote

[RBW] Re: looking for a recent post on brake clearance

Brakes I've used that give good clearance are suntour superbe short or nomal reach and the diacomp equivalents. Are those gran comp and royal gran comp? Mike in warm SLO -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To u

[RBW] Re: WTB: (2) - as in a pair of - Nitto Rack Strut Bolts

Thanks all. I found a set on SimWorks. My Mark's Rack is now complete. - Mike On Friday, April 21, 2017 at 6:31:59 AM UTC-5, Ron Mc wrote: > > Nitto 20184 doesn't google well. > Alex's cycle has them in Japan > https://alexscycle.com/collections/other-campee/prod

[RBW] Re: small saddlesack weight tolerance

Oooh, Stuffed Saddlesack thread! https://www.instagram.com/p/BO0iWdghE9R/?taken-by=mr.ghort https://www.instagram.com/p/BPQdlD7BFfJ/?taken-by=mr.ghort (Yes, your described cargo will fit fine without sagging.) -- You received this message because you are subscribed to the Google Groups "RBW O

[RBW] Re: OT: Japanese Woodworking

I love this list; I am now interested in both Japanese Woodworking and floor living. Any good blogs / photo sets about floor living out there? Mike On Thursday, April 27, 2017 at 1:12:19 PM UTC-5, Deacon Patrick wrote: > > Does anyone know good books or online resources or someone will

[RBW] WTB: (2) - as in a pair of - Nitto Rack Strut Bolts

7;t sell them, and Google doesn't return any other results. Does anyone have an extra set by chance or is just using one set of struts and can sell a guy the second set of bolts? Or if you know another bike site to check out, I'll do it immediately. Thanks, Mike in ATX -- You re

Re: [RBW] FS: Four Irish Straps

I'll take em Michael Sent from my iPhone > On Apr 20, 2017, at 4:08 PM, Michael Ullmer wrote: > > Spring cleaning turned up four Irish Straps I don't remember purchasing. One > of them is cut shorter than the rest. > > $20 shipped CONUS. > > Pics here: https://goo.gl/photos/Ctf9j2poMQ4d3Hhk9

Re: [RBW] FS: Green Clem Smith Jr H 59CM - stock build with SKS fenders - $800 plus shipping - moving sale

91-92 cm. Sent from my iPhone > On Apr 17, 2017, at 5:25 PM, 'RickH' via RBW Owners Bunch > wrote: > > Hi, Mike. Do you have any pictures? Also, what is your pbh? I am between a > size 52 and 59 in a Clem. Would love to see photos with your saddle height, &

Re: [RBW] FS: Green Clem Smith Jr H 59CM - stock build with SKS fenders - $800 plus shipping - moving sale

Tampa fl area. Sent from my iPhone > On Apr 17, 2017, at 5:35 PM, Jeffrey B wrote: > > Hi Mike, where are you located? > > -- > You received this message because you are subscribed to a topic in the Google > Groups "RBW Owners Bunch" group. > To unsubscri

[RBW] FS: Green Clem Smith Jr H 59CM - stock build with SKS fenders - $800 plus shipping - moving sale

Stock build. I bought it 6 months ago but spend my time riding my LHT. The bike might have 100 miles on it. I changed the shifters and will include the stock shifters. The bike is in perfect working order. -- You received this message because you are subscribed to the Google Groups "RBW

Re: [RBW] WTB: 61cm Atlantis

Hey Joe, i sorta bit off more than I could chew in getting a 64 Atlantis, im ~6ft, 89.5 pbh, so pretty close to your measurements. Ive ridden a 61, and it felt small, so I went 64. I pretty much always look at the Riv pbh chart and if im between sizes I tend to go larger Sent from my i

Re: [RBW] WTB: 61cm Atlantis

Ah, no worries man! Sent from my iPhone > On Apr 4, 2017, at 6:36 PM, 'frank_a' via RBW Owners Bunch > wrote: > > Hello Michael, > Just sent you an email, > - Frank > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubscri

[RBW] Re: Rivendell Rebate Program - Promote your Referral Link here - ONLY!

t!: http://rivbike.trybeans.com/r/michael.kaiser/ - Mike in ATX -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@

[RBW] Re: Wide drops for loaded Hunqapillar

duct/portola-bar - 112mm drop, pretty wide, 26.0 clamp size. Could be a good fit! - Mike On Friday, March 17, 2017 at 11:25:21 AM UTC-5, drew wrote: > > I seem to be going in reverse rivendell order with handlebars on the > hunqapillar. it had albatross and now albastache bars. like both

[RBW] Re: The next Velo Lumino product: rear fender reinforcement plate

Anton, What is the purpose of the center hole? The outside holes, I assume, attach to the fender. Are there attachments beneath brake bridges for fender mounting? If so, I probably could have saved myself some trouble over the years. Follow-up question, do these only work with center-pull/canti

[RBW] Re: FS: Various Shimano goodies - Dura Ace 7400, 600 Tri-color, and more

7-speed (the one it starts on plus 6 clicks). Friction definitely works. - Mike On Friday, March 17, 2017 at 8:50:55 PM UTC-5, Max S wrote: > > I'm potentially interested in the 600 shifters. How many speeds?.. Does > the friction option work?.. > > - Max > -- Yo

[RBW] Re: Wide drops for loaded Hunqapillar

I've looked for that kind of bar for years... no such luck.My fav wide off-road bar these days is the new Ritchey Venturemax... but its 31.8 clamp and black. ~mike Carlsbad Ca > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bun

[RBW] Re: FS: Various Shimano goodies - Dura Ace 7400, 600 Tri-color, and more

Silver Shifters are sold. I still have the Shimano 600 deraileurs and shift levers, as well as the Shimano Z and the Campy FD. Feel free to make an offer on anything that seems enticing. If I don't get any takers I'll try the iBob list. Thanks, Mike On Friday, March 10, 2017 at

[RBW] Re: FS: last thing - Silver Shifter Bar End Kit (with pods!)

Sold! Thanks. On Tuesday, March 7, 2017 at 7:17:56 PM UTC-6, Mike K. wrote: > > Alright team, I think this is the last thing I'll find (read: you may hear > from me again tomorrow). > > A set of Silver Shifters with bar end pods. The washers could use > replacing (one i

[RBW] Re: FS: Various Shimano goodies - Dura Ace 7400, 600 Tri-color, and more

Bump for the weekend, and price drop. Available parts: Shimano 600 Tri-color (6400 group), all in good shape 2 Rear Derailleurs - $25 each 1 set of shift levers - $25 Shimano Z Derailleurs - served me well for years on my commuter. Simple friction set up. - $20 for the set - Rear derailleur is l

[RBW] Re: FS: Various Shimano goodies - Dura Ace 7400, 600 Tri-color, and more

The Phil bb is sold. The Dura Ace crank is claimed. Thanks, all! Feel free to make an offer on anything. Will definitely discount if you want a few things. On Monday, March 6, 2017 at 9:08:40 PM UTC-6, Mike K. wrote: > > Some random parts I've collected the last few years that I need

[RBW] Re: FS: Various Shimano goodies - Dura Ace 7400, 600 Tri-color, and more

The Phil bb is sold. Thanks, all! Feel free to make an offer on anything. Will definitely discount if you want a few things. On Monday, March 6, 2017 at 10:21:48 PM UTC-6, Mike K. wrote: > > Now featuring Phil Wood! > > One more thing to add to the For Sale category. > > I ha

[RBW] FS: last thing - Silver Shifter Bar End Kit (with pods!)

you have questions. Thanks! Mike in ATX -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post

[RBW] Re: FS: Various Shimano goodies - Dura Ace 7400, 600 Tri-color, and more

ff. I bought it that way and didn't have any trouble with it. Asking $90 shipped CONUS priority mail Queue the pictures: https://flic.kr/s/aHskVwBbib Thanks, Mike in ATX > > > On Monday, March 6, 2017 at 9:08:40 PM UTC-6, Mike K. wrote: >> >> >> Link to p

[RBW] Re: FS: Various Shimano goodies - Dura Ace 7400, 600 Tri-color, and more

Just realized I forgot something. The Z front derailleur is 31.8 clamp size. I ran it on an old Cannondale for a while. - Mike in ATX On Monday, March 6, 2017 at 9:08:40 PM UTC-6, Mike K. wrote: > > Some random parts I've collected the last few years that I need to get rid > of t

[RBW] FS: Various Shimano goodies - Dura Ace 7400, 600 Tri-color, and more

Some random parts I've collected the last few years that I need to get rid of to help finance the Ram build. All prices include shipping CONUS. Dura Ace FC-7402 - 172.5 arms, 53/42 rings. The 53 is pretty rugged (a few chipped teeth etc, would definitely recommend getting a replacement) but the

[RBW] Re: FS: Clem Smith Jr H 59CM - $1250 or trade for Appaloosa 58cm frameset

Bump. $950 plus shipping. Stock build + Fenders. Great bike but it doesnt get used. On Friday, November 25, 2016 at 10:44:28 AM UTC-5, mike smith wrote: > > Includes: > >- original bosco bars and shifters >- alba bars and indexed shifters pictured. >- SKS f

[RBW] WTB: 51cm Soma San Marcos or 54cm Rambouillet Frameset

Thanks all. I just bought Toshi's Ram. Can't wait!! It's my first Rivendell. I'll be sure to post pictures after it's built. Cheers! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails

[RBW] 54 cm Rambouillet frame/fork/headset for sale--$400!!

Let me know if you don't find a local buyer. I just posted yesterday that I'm looking for a 54 Ram. I'm in Austin, TX. - Mike in ATX -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group

[RBW] Re: WTB: 51cm Soma San Marcos or 54cm Rambouillet Frameset

Thanks for the heads up, Sean. I'll open up the search to a 52 Ram as well. - Mike > Thinking if you're looking at a 51cm San Marcos, you could search for > a 52cm Ram as well as the 54cm. > > Good luck in your search. > > Sean > ATX > -- You rec

Re: [RBW] WTB: 51cm Soma San Marcos or 54cm Rambouillet Frameset

Every time I go just a hair bigger, I end up with a too long top tube. Need to keep the Soma at 51. Thank you for the offer though! On Wednesday, March 1, 2017 at 12:10:28 PM UTC-6, danmc wrote: > > Hi Mike - > > I have a 54cm San Marcos in the box that I am planning to sell as I

[RBW] WTB: 51cm Soma San Marcos or 54cm Rambouillet Frameset

s for years and don't want to part with any of the current components if I can help it (pun intended). Cheers, Mike in ATX -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving

[RBW] WTB: 51cm Soma San Marcos or 54cm Rambouillet

years and don't want to part with any of the current components if I can help it (pun intended). Cheers, Mike in ATX -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails fr

[RBW] Re: FS: Clem Smith Jr H 59CM - $1250 or trade for Appaloosa 58cm frameset

Bump. $1000 plus shipping. I put the Bosco Bars back on the bike and will keep the Alba Bars & Brooks Saddle. On Friday, November 25, 2016 at 10:44:28 AM UTC-5, mike smith wrote: > > Includes: > >- original bosco bars and shifters >- alba bars and indexe

[RBW] Re: Clem Smith Jr standover?

Just measured mine on the stock tires from (Kenda Kwik Seven-5 27.5 x 1.75) and the brocure is spot on at 31.5 in standover. On Wednesday, February 1, 2017 at 9:25:52 PM UTC-6, iamkeith wrote: > > Brochure shows it: > https://drive.google.com/file/d/0Bzo7-V-zcAdRNjFld2JBLVUzY3M/view -- You re

[RBW] Re: Anyone have experience using Bosco bars?

Would love to see pix of that! On Thursday, February 2, 2017 at 2:20:17 PM UTC-6, masmojo wrote: > > I had them on my 52 Clementine; I didn't hate them, bit they do come back > a lot. A long stem is a necessity. I was using a 100mm Technomic and coulda > gone a bit more. In the end I changed ov

[RBW] FS: schwalbe Big Ben 700x50 cream tires pair $50

Under 250 miles. Went with a different color scheme. Will include 2 tubes. $50 shipped -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsu

Re: [RBW] Re: dynamo light decisions: Lumotec or Edelux?

why not something like this? [image: 5Pairs Female and Male 2 Pin 20AWG L6.2-2P Tamiya 30cm Wire Connectors] ~mike Carlsbad Ca -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving e

[RBW] FS- older Lewis and Clark trail maps

7, from Pierre, South Dakota to Astoria, Oregon. ACA sells the current ones for over 15 bucks each. I'm looking for $20 plus shipping for all five, which should be $6.45 USPS. I'm moving and don't want to cart them around any more and don't want to recycle them either. Ch

[RBW] Free for postage- classic bike xeroxes and maps

es. I just don't want to cart it along on one more move. PayPal friends and family preferred. Cheers- Mike in Bklyn, NY, but not for long -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group an

Re: [RBW] Re: FS: Nitto seatposts/ stems/ Brooks....... lots o goodies

Oh yeah, sorry about that. Standard, tan sidewalls Sent from my iPhone > On Jan 11, 2017, at 6:39 AM, Ryan Thompson wrote: > > Are the RTPs standard or extralights? > > Thanks, > Ryan > >> On Tuesday, January 10, 2017 at 11:19:54 PM UTC-5, Michael Williams wrote: >> Hello group: Winter c

Re: [RBW] FS: Nitto seatposts/ stems/ Brooks....... lots o goodies

Hey Eric, youre up in the Davis area right? I might be able to get the saddle shipped out today. My paypal is mkernanwilli...@gmail.com, just shoot me your shipping address. Sent from my iPhone > On Jan 11, 2017, at 6:08 AM, Eric Norris wrote: > > PM sent about the black B17. > > –Eric

[RBW] FS- Wald basket, Jobst Wheel Book, Cranks, Levers

on my Rivendell, but switched out the noodles for other bars and don't need these any more. $15 plus shipping. PayPal "friends and family" preferred, buyers for multiple items take precedence. Please contact me OFF LIST at beewak at gmail . com Local pickup in Brooklyn possibl

[RBW] WTB: albastache handlebars

Give me a holler! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-own

Re: [RBW] Quickbeam S24O in the Santa Cruz Mountains

Awesme story, thanks for sharing Patch! Sent from my iPhone > On Jan 3, 2017, at 8:32 PM, Patch T wrote: > > Thought I'd share a few photos, and some videos, of camping out in the Santa > Cruz (CA) Mountains on a Quickbeam a few weeks ago. > > The route was originally to incorporate more dir

Re: [RBW] WTB: Sugino XD2 crank arm( left/ non drive side)

Thanks Richard, I'll check those out Sent from my iPhone > On Dec 31, 2016, at 11:00 AM, RichS wrote: > > Try Universal Cycles. I purchased the same arm from them. Ben's Cycles may be > another source. > > Best, > Richard > > -- > You received this message because you are subscribed to the

[RBW] FS: cream 700x55 Big Ben tires

Oops! 700x50 size -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-own

[RBW] FS: cream 700x55 Big Ben tires

About 30 miles on them. $60 shipped -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, se

[RBW] WTB: albatross or choco moose handlebars

Any condition. Alu preferred on the albas. Thanks guys! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To pos

Re: [RBW] Re: Jones and Hunq

Holy Daniel! That sounds like the dream bike! Sent from my iPhone > On Dec 21, 2016, at 4:56 PM, Daniel Jackson > wrote: > > 25" steel 135 rear 150 front titanium forked Rohloff modded Plus in Northern > VT open for test rides. > > -- > You received this message because you are subscribed

[RBW] Re: Mounting a mountain bike shifter to drop handlebars

Paul Comp makes a bracket for that purpose. https://paulcomp.com/shop/components/sram-shifter-adaptor/ ~mike Carlsbad Ca > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop recei

[RBW] Atlantis crankset question

Have any of you guys used a modern compact (50t/34t) outboard bb cranks on your Atlantis? Just wondering if it will clear -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send

[RBW] FS- Deore crank arms, Cane Creek levers, dt shifters, rear der.

et me know and we could arrange pickup and save on shipping. Cheers- Mike in Bklyn, NY -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-own

[RBW] FS: shimano 600 cranks with tange bb

45 shipped! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bu

[RBW] Wtb/bar end shifter question

Hey guys, I have a 1x10 set up on my Atlantis with a 10 speed xt cassette and derailleur. I need a rear bar end shifter that can go up to 10 on friction, which I'm pretty sure most Shifters can do if I'm not mistaken? thanks! -- You received this message because you are subscribed to the Goo

[RBW] FS: my old 1x10 set up.

Hey guys, have had these laying around for a while from an old 1x10 build on my riv: -Deore XT 10 Speed 11-36 cassette (less then 100 miles) with KMC 10 speed chain. $50 shipped -shimano zee rear 10 speed shifter. ( less then 100 miles) $19 shipped -shimano 600 cranks in fantastic condition. 17

[RBW] FS: shimano 600 cranks with tange bb

Hey guys I took this off of my Atlantis. Fantastic cranks in crazy good shape for their age. I bought them NOS about a year ago . Crankset is 170mm arm length 130bcd. Square taper. Comes with tange square taper bb that has a 118 length with less then 100 miles. DM for photos. $65 shipped --

[RBW] WTB choco moose

Or bosco bullmoose! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-o

[RBW] WTB choco moose

Looking for some choco moose bars! Don't care about the condition -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.

Re: [RBW] Re: An un-obstructive front handle bar bag for boscos?

s a really nice color too. Worth checking out. -Mike Sent from my iPhone > On Nov 27, 2016, at 8:42 AM, anniebikes wrote: > > Nick, nice set up. I am an experienced bike tourer and in recent years I've > gravitated towards the upfront loading firstly, then add rear baggage or o

[RBW] Re: Clem vs Appaloosa ride comparison

I like Al's descriptions; actually very informative. Would be great to hear such first-person, 2-4 sentence identity descriptions of every Riv model. Mike -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from

[RBW] Re: Clem vs Appaloosa ride comparison

Your rendering in Bikecad on another post helped some. the Joe looks to be about 2 CM shorter (length) and possibly 1 cm shorter (standover). Does that sound about right? On Tuesday, November 15, 2016 at 2:51:33 PM UTC-5, iamkeith wrote: > > I've been interested in the same question/answer, for

[RBW] Clem vs Appaloosa ride comparison

Has anyone riden both? How do they compare & contrast? I have a 59cm Clem and I'm considering a 58 Joe. 91 PBH. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an emai

[RBW] FS: riv bullmoose handlebars

Just to clear up, this is the TIG version. $100 shipped :) -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To

[RBW] FS: riv bullmoose handlebars

$110 shipped -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-b

[RBW] FS: schwalbe thunder burt 29x2.1 pair

$55 shipped -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-bu

[RBW] FS: schwalbe thunder burt 29x2.1 pair

$60 shipped. Had on my Atlantis for a month . Going to a smaller tire with fender. Super fast tires! Good shape -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email

[RBW] FS: riv bullmoose handlebars

$120 shipped! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to this group, send email to rbw-owners-

[RBW] FS: riv bullmoose handlebars

I will also trade for a saddleback medium or carradice LF! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To

[RBW] FS: riv bullmoose handlebars

Not used much. I did however take half an inch off each side. In good shape. $130 shipped -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+

[RBW] Re: Clem Smith Jr with Alternate Handlebars? - Choco-moose

Have you thought about Albatross bars? I called into Riv and they said some custom builds go out with Albatross. On Wednesday, November 2, 2016 at 2:56:38 PM UTC-4, iamkeith wrote: > > I have non bullmoose boscos on my 59. I used a 130mm, negative-rise stem > in order to get them low enough.

[RBW] Clem Smith Jr with Alternate Handlebars? - Choco-moose

Has anyone changed handlebars on the CSJ? I like the current bars but I'm too upright? 59cm Frame. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owne

[RBW] Re: FS: Albatross Cockpit & Paul Thumbies (with sticker!)

All sold. Thanks, everyone! On Monday, October 3, 2016 at 10:58:50 AM UTC-5, Mike K. wrote: > > Bump and price drop. > > Alba cockpit now $140 shipped CONUS. > > Let me know if you are interested. > > - Mike > -- You received this message because you are subscribe

[RBW] Re: FS: Albatross Cockpit & Paul Thumbies (with sticker!)

Bump and price drop. Alba cockpit now $140 shipped CONUS. Let me know if you are interested. - Mike -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an ema

[RBW] Re: FS: Albatross Cockpit & Paul Thumbies (with sticker!)

Alright. Thumbies are sold! If you're interested in the cockpit, let me know. On Tuesday, September 27, 2016 at 10:50:21 PM UTC-5, Mike K. wrote: > > > Evening all, > I have a Nitto Albatross cockpit I bought on the list in July/August that > needs to be relocated. I rode

[RBW] FS: Albatross Cockpit & Paul Thumbies (with sticker!)

Evening all, I have a Nitto Albatross cockpit I bought on the list in July/August that needs to be relocated. I rode them for a bit, but decided to go back to dirt drops. Cockpit includes: - Nitto CroMo Albatross bars - Nitto 110mm/25.4 Tallux - Shimano MTB levers - Miesha's cork

[RBW] Albatross Cockpit & Paul Thumbies

Evening all, I have a Nitto Albatross cockpit I bought on the list in July/August that needs to be relocated. I rode them for a bit, but decided to go back to dirt drops. Cockpit includes: - Nitto CroMo Albatross bars - Nitto 110mm/25.4 Tallux - Shimano MTB levers - Miesha's cork

Re: [RBW] FS/ FT 2 46T chainrings( 110bcd)

Yes Ryan, both made by Sugino. -Mike Sent from my iPhone > On Sep 24, 2016, at 4:22 PM, Mike Williams wrote: > > Both Silver, Im pretty sure both Sugino, let me get back to you on the > maker Ryan > > Sent from my iPhone > >> On Sep 24, 2016, at 4:11 PM, Ry

Re: [RBW] FS/ FT 2 46T chainrings( 110bcd)

Yes Ryan, both Sugino made Sent from my iPhone > On Sep 24, 2016, at 4:22 PM, Mike Williams wrote: > > Both Silver, Im pretty sure both Sugino, let me get back to you on the > maker Ryan > > Sent from my iPhone > >> On Sep 24, 2016, at 4:11 PM, Ryan Ray

Re: [RBW] FS/ FT 2 46T chainrings( 110bcd)

Both Silver, Im pretty sure both Sugino, let me get back to you on the maker Ryan Sent from my iPhone > On Sep 24, 2016, at 4:11 PM, Ryan Ray wrote: > > Color? Maker? > > -- > You received this message because you are subscribed to the Google Groups > "RBW Owners Bunch" group. > To unsubs

Re: [RBW] FS: 62 SimpleOne

Hey Mark, Could I come check out your simpleone maybe tomorrow ( tuesday) afternoon? What neighborhood are you in? Thanks! -Mike Sent from my iPhone > On Sep 10, 2016, at 10:27 AM, Mark Benedetto wrote: > > Howdy, > I'm selling my 62cm green SimpleOne. I rode it only

[RBW] WTB: 25.4mm Stem - Periscopa or tall dirt drop stem

hem high enough, and the stock stem from the Voyageur was itty bitty. If you have one that you can part with, let me know. Thanks! Mike in ATX -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop

[RBW] Re: Cheviot (or Sam)

I'd also be interested to hear from those who are in a position to compare the Cheviot to the Clem L-Style. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: Any benefits to the longer CS's?

You need to ride a Jones Plus! Getting the front wheel up is super easy! On Monday, June 13, 2016 at 4:19:45 PM UTC-7, Richard Rios wrote: > > On road they are fine. Very laid back feeling, smooth and what others > mentioned. Off road I found I didn't like them so much especially if paired > wit

[RBW] PSA: 60cm Quickbeam in Austin

http://austin.craigslist.org/bik/5648673255.html -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To post to t

[RBW] Re: FS/T: Remainders/Tektro, Nitto, Shimano, my oh!

Update: stem and brakes sold. That leaves: - Shimano Z-series Derailleurs, front (28.6mm clamp) and rear - $30 - Shimano MT60 FD (28.6mm clamp) - $15 Pricing is shipped CONUS. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscr

[RBW] Re: FS/T: Remainders/Tektro, Nitto, Shimano, my oh!

Tektro CR720's are sold. > > Derailleurs and the stem remain. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com.

[RBW] Re: Handlebar Suggestions for MTB Build?

Oops, wrong link, here's the correct product: SOMA High Rider stem adapter <http://www.somafab.com/archives/product/high-rider-stem-adapter-28-622-2> On Saturday, June 18, 2016 at 11:42:22 AM UTC-7, Mike in WA wrote: > > You could easily get the Jones H-Bar high enough with

[RBW] Re: Handlebar Suggestions for MTB Build?

You could easily get the Jones H-Bar high enough with a Soma High Rider stem . The Jones H-Bar is absolutely fantastic, I can't imagine ever using another bar, especially for MTB purposes; super stable and comfortable with so many good pos

[RBW] FS/T: Remainders/Tektro, Nitto, Shimano, my oh!

Alright. I still have a handful of good things in my garage that need good homes as I attempt to build out my bike. 1. Tektro CR720's - $30, whole bike's worth Big thanks for Jack for the hook up, unfortunately there isn't enough clearance on my '87 Voyageur for the brake pads to fit between th

[RBW] FS: Remainders/Tektro, Nitto, Shimano, my oh!

Alright. I still have a handful of good things in my garage that need good homes as I attempt to build out my bike. 1. Tektro CR720's - $30, whole bike's worth Big thanks for Jack for the hook up, unfortunately there isn't enough clearance on my '87 Voyageur for the brake pads to fit between the

Re: [RBW] Re: Looking for 121mm bb spindle

> > Thanks! I have it adjusted all the way out away from the frame right now > to clear the chain when it's on the inner ring, so I can definitely bring > it back toward the frame. - Mike -- You received this message because you are subscribed to the Google Groups "RB

Re: [RBW] Re: Looking for 121mm bb spindle

Tried measuring a few extra times. Looks to be a little more than 1/4". So it seems there's some room to bring the crank closer. On Tuesday, June 14, 2016 at 9:40:28 PM UTC-5, Mike K. wrote: > > Best I can measure with a tape is 1/4" or between 6 and 6.5mm > -- Y

Re: [RBW] Re: Looking for 121mm bb spindle

Best I can measure with a tape is 1/4" or between 6 and 6.5mm -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com.

<    2   3   4   5   6   7   8   9   10   11   >