I purchased a Sergio green Roadini from the last run of framesets. The tig
welding on this frame had some very poor welding beads. Definitely not what
I would expect on a $1300 frame. Maybe it was just this frame, but I feel
that it certainly could have been on the other Roadini's. That could
The Nitto Tallux stem came off an early model Clem L that had seen very
little use. I sold the frameset but kept the components. 120mm reach with a
-17 degree drop but levels out once mounted. 225mm quill. 25.4 handlebar
clamp. Excellent clean condition with some very faint marks from
I wouldn't be surprised if RBW dropped the Homer Hilsen from their line-up
and replaced it with the Charlie H. Gallop (expected next year). Especially
since it looks to have longish chainstays and uses the same caliper brakes
as the Homer. Different frame design but similar "country bike"
:
> lol. As soon as I saw this, I knew you had to be the guy who removed the
> head badge on what is now my Green Rosco.
> On Friday, December 1, 2023 at 10:51:52 AM UTC-6 Paul M wrote:
>
>> Sold. Thanks!
>>
>> On Friday, 1 December 2023 at 05:34:25 UTC-8 Paul M wrote:
Sold. Thanks.
On Wednesday, 26 April 2023 at 20:31:52 UTC-7 Paul M wrote:
> Another set mounted on my Hillibike.
>
> On Wednesday, 26 April 2023 at 20:24:04 UTC-7 Paul M wrote:
>
>> Nice multi-purpose tires with a tread design for off-road and street use
>> that h
his would work for you. Hopefully it's still
> avail.
>
> On Thursday, March 30, 2023 at 1:22:37 PM UTC-4 Graham McCall wrote:
>
>> Paul- is this still available??
>>
>> On Wednesday, September 14, 2022 at 10:12:36 AM UTC-5 Paul M wrote:
>>
>>> Last ca
:
>
> "A fellowship. A fellowship of Rivendells.
>
> (Tolkien fans: you know.)"
>
> PERFECT.
>
> Paul M: I believe that Platypus-looking frame is indeed a Platy sans
> decals and with a replacement fork.
>
> Joe Bernard
> On Saturday, March 25, 2023 at 7:41
, they go quick!
>
> On Tuesday, January 31, 2023 at 4:22:00 PM UTC-8 Paul M wrote:
>
>> I have a new XL (59cm) Lime-Olive Susie Longbolt frameset for sale that
>> I'm most likely posting later in the week. I picked up a 56cm Susie from
>> the most recent Rivendell offerin
My recent Susie calls for a 26.8 seatpost but with the stock Kalloy
seatpost there is a fair amount of play. I had a 27.0 Kalloy seatpost that
fit snug and solved the problem. I'm not sure a Nitto 26.8 seatpost would
have solved the problem for this frame.
On Thursday, 26 January 2023 at
If you read the current Rivendell Blahg (Grants blog) he mentions that the
last fillet brazed Hillibikes, the Gus & Susie shipment that just arrived,
will be it for that those models being made. So last chance at owning a
beautiful ATB frameset.
--
You received this message because you are
Sure resembles the original Breezer Series 1mountain bikes. Diagonal tube,
Magura motorcycle brake levers, TA Specialties crankset, Brooks B-72...nice!
On Wednesday, 21 December 2022 at 16:55:56 UTC-8 Luke Hendrickson wrote:
> Yes! Spoke to Bailey at Sincere Cycles here in Santa Fe about it.
ar too. As far as spreading out the controls, I assumed you could
> mount the shifters on the forward extension, kind of like Jones did with
> the early "H" bars before they became a full loop. That would probably
> help free up some grip area.
>
> On Sunday, September 4
Hello, Anybody know the grip length on this particular multi-hand position
handlebar? Seems like more and more of the alt-handlebars don't have a long
grip length to spread out the grip, brake lever and thumb shifter
positions. Thanks.
--
You received this message because you are subscribed
The Marin Museum of Bicycling/Mountain Bike Hall of Fame located in Fairfax
CA is hosting a bike swap in their parking lot this Sat. from 9am-2pm.
There will be 30 plus vendors selling and swapping at this 7th annual cycle
swap. Admission to the museum will be half-priced. Yes, a Rivendell
When all else fails there is the bomb proof bullmoose style handlebar
On Tuesday, 17 May 2022 at 05:57:23 UTC-7 Doug H. wrote:
> I had that same issue with Bosco bars on a Clem H. I tightened the bolt
> really tight and they still slipped then I tightened them a little tighter,
> more than I
The musical instrument decals were originally on the top tube and non-drive
side chain stays. Now the decals are on the drive side chain stays which a
lot of riders wrap with cloth tape. You got to like the dark gold color and
the Breezer style dropouts. Oh ya, and the dobro guitar decal.
Looks like the instrument decals on the top tube are missing. Just
wondering if the new frames are going to be that way? I just purchased a XL
lime/green Wolbis frameset today- that's one big Hillibike!
On Saturday, 14 May 2022 at 17:30:43 UTC-7 Hetchins52 wrote:
> Wow, that head badge "POPS"!
Hello, The Pitlock skewers are sold! Thanks.
On Thursday, 17 February 2022 at 08:36:50 UTC-8 Paul M wrote:
> Hello, As new locking skewers that were on my bicycle for 3 rides. Cold
> forged and CNC machined from high quality stainless steel. Replaces
> 130/135mm rear and 100mm fr
Sold. Thanks!
On Wednesday, 16 February 2022 at 13:45:51 UTC-8 mcgr...@gmail.com wrote:
> Might as well give it a shot! Just sent you a PM.
>
> James
>
> On Wednesday, February 16, 2022 at 1:32:21 PM UTC-5 Paul M wrote:
>
>> Hello, This stem came off a vintage Rodrique
Looks like proto-Bosco style handlebars also.
On Thursday, 19 August 2021 at 20:04:21 UTC-7 Gill wrote:
> Out for a ride passed a yard sale and saw this bike. I thought it showed a
> strong family resemblance to the Clem I was riding: maybe a great
> grandfather on the mother’s side. No name
The Hillborne head badge has been sold. Thanks!
On Saturday, 5 December 2020 at 15:20:26 UTC-8 Paul M wrote:
> Just popped this off my new Sam Hillborne frameset as I like the look of
> the bare cream colored headtube contrasting with the dark gold frame.
> Perfect condition. Amazing
Nitto parts are sold. Thanks!
On Friday, 13 November 2020 at 11:22:14 UTC-8 diekaiser wrote:
> Paul, PM’ed you :)
> On Thursday, November 12, 2020 at 5:14:40 PM UTC-8 Paul M wrote:
>
>> Purchased these to convert a Burley drop bar tandem to a flat bar set-up.
>> So
The model name "Hunqapillar" that was inspired from a very large mailbox
some place in the mid-west on Grant's ride across the country. But turns
out to be my favorite name and Rivendell model. Stick shifting is the only
way to go if your frame doesn't have a left side cable stop and your
Good to see this frame reappear after Grant's posting several months ago. I
was very intrigued by it. What is the headtube length out of curiosity.
Thanks.
On Tuesday, 8 September 2020 at 10:24:04 UTC-7 lconley wrote:
> Yes, especially on Rivs which have longer threaded sections on the fork,
Not to dwell on it but take a look at picture #15 and the cantilever post
shows brazing rod. Also look at the bottom bracket picture and zoom in and
that looks like classic rust under clear coat. Super nice bike in any case.
You got to love the double top tube!
On Thursday, 6 August 2020 at
>From RBW website Grant says this about the Atlantis frame, "Quirk: The 59cm
and 62cm have "rainbow" tubes that add style and structure by
triangulation, and a better lifting tube than a standard top tube." For me
that means aesthetics and practicality.
On Wednesday, 5 August 2020 at 22:55:18
Looks like the frame is just clear coat over raw steel. Not a good
combination for the PNW.
On Thursday, 6 August 2020 at 04:49:35 UTC-7 masmojo wrote:
> Nice, a bit too big for me and I find myself in pretty much the same
> position. That is, selling rather than buying.
--
You received
t to the hub dynamo.
>
> Peter White
>
> On Sat, Jun 13, 2020 at 8:10 PM Paul M >
> wrote:
>
>> Anybody know the proper wiring for an older Supernova E3 headlight to a
>> Schimdt /Sondelux hub with 2 male spade connectors? The Supernova
>> headlight h
I believe the schematic shows an oval top tube. Starts at 25.4 then
transitions to oval (28.6/22.2). Makes for a more comfortable place to sit
while stopped.
On Monday, 8 June 2020 18:16:47 UTC-7, Eric Daume wrote:
>
> I also saw the drawing had a 25.4mm non-oversized top tube. I hope Riv
>
It sold and is making it's way back to another Bruce Gordon bicycle. Thanks.
On Sunday, 31 May 2020 19:05:02 UTC-7, jbu...@gmail.com wrote:
>
> I'll take it!!!
> Joe
>
> On 5/31/20, Paul M > wrote:
> > Handmade Bruce Gordon "chicken neck" tig welded stem from
The Sim Works handlebar is SOLD. Thanks!
On Thursday, 14 May 2020 17:32:36 UTC-7, Brendan Willard in SF wrote:
>
> PMed
>
> On Thursday, May 14, 2020 at 4:52:19 PM UTC-7, Paul M wrote:
>>
>> These bars are designed by Sim Works and made by Nitto. Gave them a try
Hi, I'm certain there was only one version of the Chocomoose. Rivendell
put them up for sale on the 'garage sale' around the time the Butternut
squash Appaloosa complete ended. Unlike the Rivendell Bullmoose bar which
will always sweep upwards unless it's on a bike with a very slack headtube
The Rosco sold. Thanks!
>
>
> On Monday, 3 February 2020 16:29:36 UTC-8, Joe Bernard wrote:
>>
>> The ETT on this is 60 and ST C-to-C is 52. My guess is the accurate size
>> as Riv called it is 53.5-54cm.
>
>
--
You received this message because you are subscribed to the Google Groups "RBW
This is version 5 of the Rosco Bubbe run. The seattube center to top of
toptube is 53cm and 56cm to the top of the seattube.The toptube has a 8.2
degree upward slope making the max standover with 42c tires 83cm.
On Monday, 3 February 2020 16:29:36 UTC-8, Joe Bernard wrote:
>
> The ETT on this
The saddle sold. Thanks.
On Tuesday, 21 January 2020 04:15:32 UTC-8, WETH wrote:
>
> Replied off list yesterday.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an
This saddle came off a new Co-Motion divide that I purchased this summer.
It was only on the bike for 2 very short rides (20 miles) total. It has the
length of the Independence model (280mm) but the width of the Sonora model
(174mm) which makes me think it is an older model.
On Sunday, 19
On Saturday, 18 January 2020 14:20:44 UTC-8, Paul M wrote:
>
> FS: New old stock Rivet Saddle Works leather saddle with titanium rails.
> 174mm wide by 280mm in length. 20 miles or less of use. Perfect condition
> without any signs of use. Rock hard. I'm a Brooks fan and felt some
Grant's blog (blahg) early November No. 30 starts off with a partial
schematic of a frame design that isn't labeled but looks like part
Roadini/Clem/Suzie Longbolt. The top tube attaches higher up on the seat
tube than the Suzie and the wheels show 700c x 2.0. With the lack of being
able to
Thanks, The bar is sold and went on to an Atlantis build owner.
On Saturday, 5 October 2019 10:13:35 UTC-7, Paul M wrote:
>
> Hi, This bar came off a Peter Dreesens touring bike that was hardly
> ridden. Nitto model 177, heat treated, 48cm wide with a few very light
> scratches
SOLD. Went to a good soul.
On Friday, 27 September 2019 07:07:22 UTC-7, Paul M wrote:
>
> Still for sale. No shipping cost to CA,OR,WA Thanks.
>
> On Friday, 27 September 2019 04:42:41 UTC-7, alan lavine wrote:
>>
>> I’ll take them!
>> Send details please.
>&g
Still for sale. No shipping cost to CA,OR,WA Thanks.
On Friday, 27 September 2019 04:42:41 UTC-7, alan lavine wrote:
>
> I’ll take them!
> Send details please.
> Thanks
> Alan nyc
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To
Sold the bar to a Jones bicycle owner! Thanks
On Thursday, 12 September 2019 08:59:41 UTC-7, Paul M wrote:
>
> Hi, There is a sale pending. Thanks, Paul
>
> On Wednesday, 11 September 2019 21:40:01 UTC-7, Zack Medow wrote:
>>
>> Interested! Where does it ship from?
Hi, There is a sale pending. Thanks, Paul
On Wednesday, 11 September 2019 21:40:01 UTC-7, Zack Medow wrote:
>
> Interested! Where does it ship from? I’m in DC.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group
That's a good one Bill. Funnier than when I received my new Nitto bars from
a private party on Ebay they arrived in guess what? A Jones H-bar shipping
box.
On Wednesday, 11 September 2019 18:20:15 UTC-7, Bill Eberle in Portland OR
wrote:
>
> If you include a set of cork grips, a couple of
On Wednesday, 21 August 2019 11:09:22 UTC-7, Paul M wrote:
>
> Hi, Nitto fillet brazed stem from the 90's that has been stored and has
> seen less than 400 miles on my Rosco. Switched to the Choco/Moose bars and
> am trying not to have extra spare parts around. Very go
Hi, The stem has sold! Thanks.
On Thursday, 22 August 2019 09:54:04 UTC-7, Paul M wrote:
>
> 25.4 handlebar clamp diameter
>
> On Wednesday, 21 August 2019 11:09:22 UTC-7, Paul M wrote:
>>
>> Hi, Nitto fillet brazed stem from the 90's that has been stored and has
>
25.4 handlebar clamp diameter
On Wednesday, 21 August 2019 11:09:22 UTC-7, Paul M wrote:
>
> Hi, Nitto fillet brazed stem from the 90's that has been stored and has
> seen less than 400 miles on my Rosco. Switched to the Choco/Moose bars and
> am trying not to have extra spare
The fork now has a new home. Thanks for the interest.
On Monday, 24 June 2019 08:25:45 UTC-7, Wilson Wilson wrote:
>
> Do not forget, one can chop the extra tube length off and rethread or use
> threadless on any other sized frame size.
--
You received this message because you are subscribed
New price- $400 includes shipping. Thanks, Paul
On Saturday, 22 June 2019 15:30:33 UTC-7, Paul M wrote:
>
> 700c
>
> On Wednesday, 19 June 2019 09:44:05 UTC-7, Paul M wrote:
>>
>> Hello, I sold my Steve Rex touring frame and kept the fork to put on my
>> Rosco.
700c
On Wednesday, 19 June 2019 09:44:05 UTC-7, Paul M wrote:
>
> Hello, I sold my Steve Rex touring frame and kept the fork to put on my
> Rosco. I've decided not to, so maybe someone could use it for their
> Rivendell or another project. The fork comes with the Paul Racer braze
Sold. Thanks.
On Tuesday, 7 May 2019 08:47:25 UTC-7, Paul M wrote:
>
> I'm waiting on an interested party and should know today. I will let you
> know. Thanks, Paul
>
> On Tuesday, 7 May 2019 06:55:56 UTC-7, Lefebeaver wrote:
>>
>> Interested!
>>
>> On M
I'm waiting on an interested party and should know today. I will let you
know. Thanks, Paul
On Tuesday, 7 May 2019 06:55:56 UTC-7, Lefebeaver wrote:
>
> Interested!
>
> On Monday, May 6, 2019 at 12:16:52 PM UTC-4, Paul M wrote:
>>
>> Hello, Just acquired a NOS So
Hello, Just acquired a NOS Soma Saga complete bicycle that came with
Rivendell Silver bar-end shifters. Switching to flat bars so thought I
would sell these shifters. New take-off and never used as the bicycle was
still in the box. One of the black plastic washers is cracked and still
works
Hello, This Sunday the Cupertino Bike Shop will be having it's annual swap
meet with up 40-80 vendors. It's been awhile since I attended but it was
great! Lots of new and used quality cycling gear and products. New Paul
Taylor and Salsa Vaya Ti framesets. Used Steve Rex frameset. Just a couple
New price- $750.00 plus shipping Thanks.
On Saturday, 23 February 2019 07:28:48 UTC-8, Paul M wrote:
>
>
>
> On Saturday, 23 February 2019 07:10:24 UTC-8, Paul M wrote:
>>
>> Hello, Purchased 2 Rosco Bubbe v.5 framesets and only built up one. Time
>> to sell
On Saturday, 23 February 2019 07:10:24 UTC-8, Paul M wrote:
>
> Hello, Purchased 2 Rosco Bubbe v.5 framesets and only built up one. Time
> to sell the other. New, never even had wheels inserted, perfect. Can be
> built up with drops or flat bars for any type of riding. Be
Best article I've read in a long time. With the popularity of "bikepacking"
it shows that there is a resurgence of people wanting to be in nature and
enjoy the it's benefits. Maybe it's time to return to our roots.
On Thursday, 21 February 2019 18:40:01 UTC-8, Daniel D. wrote:
>
> Glad this
At least do one of the Hunqapillar since it seems to be an extinct beast, I
mean bicycle.
On Thursday, 31 January 2019 08:58:04 UTC-8, lambbo wrote:
>
> I'd buy a Cheviot and Roadini t-shirt in a heartbeat...wasn't there a
> thread about Riv-Addiction?
--
You received this message because you
On Tuesday, 11 December 2018 19:44:22 UTC-8, Paul M wrote:
>
> Howdy, I just removed the head badge from a new Rosco Bubbe frameset I'm
> about to build up. If you need one or collect head badges this one is
> available. $23 shipped. Thanks, Paul
>
SOLD! It went to macnch
If your not hiking, it's not off-road biking!
On Sunday, 14 October 2018 14:57:39 UTC-7, Deacon Patrick wrote:
>
> Starting off right in the highlands of Colorado with a climb up from a
> balmy 15˚F at 7,800 ft. to a brisk 0˚F at 9,200 ft with flurries. Here’s my
> log (they’ll all be in this
I'm in if they carry the double top tube over to the 61.5cm frameset!! The
61.5cm also has shorter chainstays !!
On Monday, 1 October 2018 19:53:21 UTC-7, CMR wrote:
>
> I love it, wish I was taller haha
>
--
You received this message because you are subscribed to the Google Groups "RBW
Still for sale. $800/ shipped Thanks, Paul
On Tuesday, 10 July 2018 16:30:53 UTC-7, Paul M wrote:
>
>
> On Thursday, 21 June 2018 09:28:18 UTC-7, Paul M wrote:
>>
>> Hi, This frame fits a true 700x43c tire with a 135mm rear spacing.
>> Rivendell did promote
On Thursday, 21 June 2018 09:28:18 UTC-7, Paul M wrote:
>
> Hi, This frame fits a true 700x43c tire with a 135mm rear spacing.
> Rivendell did promote it as a road oriented frame mainly by the top tube
> length. Yes with Choco-Moose bars or pronounced swept-back bars the top
>
Hi, This frame fits a true 700x43c tire with a 135mm rear spacing.
Rivendell did promote it as a road oriented frame mainly by the top tube
length. Yes with Choco-Moose bars or pronounced swept-back bars the top
tube length may not work for you.
On Sunday, 17 June 2018 09:51:20 UTC-7, Paul M
Thank you the stem sold.
On Sunday, 13 May 2018 15:36:39 UTC-7, Paul M wrote:
>
> Hi, Purchased this stem from Rivendell back when they were selling Nitto
> dirt drop handlebars. Never actually rode with it installed but have put
> bars in it and placed it on various potential bike
Yes they are still available.
On Sunday, 29 April 2018 18:08:08 UTC-7, Austin B. wrote:
>
> Hi, are these still available?
>
>
>
> On Thursday, April 5, 2018 at 5:49:30 PM UTC-4, Paul M wrote:
>>
>> Hello, Purchased these for a road bike project and realized they h
The crankset and bb have been sold. Thanks
On Thursday, 29 March 2018 11:53:50 UTC-7, Paul M wrote:
>
> Hello, Vintage Mavic crankset removed from a early 90's Ritchey road bike
> that was hardly ridden. 172.5 crank arms, forged, 24/38/48 chain rings in
> very good condition ( 8
On Wednesday, 28 March 2018 16:14:43 UTC-7, Paul M wrote: Thanks but the
bar and stem have sold.
>
>
>
> On Wednesday, 28 March 2018 14:18:04 UTC-7, Reid Echols wrote:
>>
>> PM sent!
>>
>
--
You received this message because you are subscribed to the Google
On Wednesday, 28 March 2018 14:18:04 UTC-7, Reid Echols wrote:
>
> PM sent!
>
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
:38:46 UTC-7, Paul M wrote:
>
> Hello, Purchased this frameset off this site less than a month ago. It
> came from A1 Cyclery in Indianapolis IN (317 241-4660). It was built up by
> them as a demo bike. The owner told me it had only a couple of test rides.
> I thought I needed ano
Hello, I'm pretty sure Bruce Gordon offers a replacement stay. He currently
sells this rack on his website. I will look into it.
On Thursday, 6 July 2017 05:54:58 UTC-7, Andrew Huston wrote:
>
> Seems like a pretty specific type of stay. Would it be possible to get a
> replacement?
--
You
Hello, I'm interested in purchasing the Paul Racer #2 set of brakes from
you. Could you tell me how many miles they've seen? Thanks.
On Sunday, 2 July 2017 08:29:34 UTC-7, Stephen D wrote:
>
> 1) Sugino XD2 170mm crank-arm length. 46/36/24 - teeth have some wear on
> large and middle chainring.
72 matches
Mail list logo
