Lum:
Here are two things that I’ve learned:
Be careful and don’t tighten it down too much. You can damage the races.
That being said, tighten the adjustable part just a bit beyond where the play
in the bearings is removed, then lightly tighten the locknut down, and finally
loosen the
This is a needle bearing IRD Rollerdrive just like Riv sells.
1. Loosen lock nut
2. tighten the nut under the spacers 1/8 turn
3. Tighten lock nut.
4. test for correct feel.
5. Readjust if.
Is this right?
Anything to look out for?
Do I have to worry about those keyed spacers or anything else