My old Pedro's cable cutters cut right through the stays. No
problema. I occassionally touch up the rough cut with a file, because
the black end caps don't tend to hang around very long.
-Jay
On Apr 3, 11:56 am, Lemon wrote:
> For those folks who use SKS Fenders, what tool do you use to trim/c
I use a roto-tool (Dremel) with a cutting blade because I can do it
without having to remove the stays from the bike again, as other have
said. Then, I put a cylindrical sharpening stone into the Dremel and
use the convex end of it to smooth the sharp edges of the cut stay.
Also, when doing the cu
I thought Patrick was tough enough to just bite 'em off.
Otherwise, for mere mortals like myself, it's a rotary tool (Black and
Decker version) cut off tool and then grinding wheel to make it a
touch nicer.
Luckily, when putting on the Longboards on the Sam Hillborne was able
to re-use the existi
Cut em any way you want then finish them off with twine ending in a
monkey's paw knot and complete it all with shellac.
-JimD
That's what I'd do.
On Apr 3, 7:10 pm, Steve Palincsar wrote:
> On Sun, 2011-04-03 at 17:14 -0700, EricP wrote:
> > I thought Patrick was tough enough to just bite 'em off
Don't have experience specifically with SKS stays, but I've been able
to cut others with a linesman's pliers. Takes a bit of hand strength
and more than one pass but it's fast and doesn't require removal.
Doug
On Apr 3, 7:14 pm, EricP wrote:
> I thought Patrick was tough enough to just bite 'em
Many thanks for all the suggestions... y'all are a great help. Went
with bolt cutters and a Dremel... excellent results.
On Apr 3, 6:31 pm, Doug wrote:
> Don't have experience specifically with SKS stays, but I've been able
> to cut others with a linesman's pliers. Takes a bit of hand strength
On Sun, 2011-04-03 at 17:14 -0700, EricP wrote:
> I thought Patrick was tough enough to just bite 'em off.
Yes, if you grind your teeth enough you can wear through just about
anything.
>
> Otherwise, for mere mortals like myself, it's a rotary tool (Black and
> Decker version) cut off tool and