[RBW] Re: WTB-- size large washers for CX70 cantilevers

That's a good idea Mark. I had my CX70s on a Hunqapillar and the medium washers were the right fit on that bike-- which suggests that Rivendell probably did not use the large washers much at all. They are nice brakes but you need to make sure you keep the pivot/bushing well oiled because

[RBW] Re: WTB-- size large washers for CX70 cantilevers

I've wondered if a shop that historically installed a lot of these would have a stock of the varied sizes leftover as stored parts. Rivendell probably built quite a few bikes with them and if they didn't always use a single size . . .? I have a set of these brakes with no spares and figured

[RBW] Re: WTB-- size large washers for CX70 cantilevers

Very true Garth. I'm not unwilling to kluge a solution together, and was about to do that very thing, but thought I'd see if someone has these sitting unused in a bin somewhere. On Sunday, October 2, 2022 at 3:42:14 PM UTC-6 Garth wrote: > You know you could likely find your own washer

[RBW] Re: WTB-- size large washers for CX70 cantilevers

You know you could likely find your own washer "add-ons" at a hardware store. That right, use your existing washers and find a like ID and OD washer to those. Stack as many as you need for the extra 4mm, or more, or less. I'm all for using what you got when possible ! On Sunday, October 2,

[RBW] Re: WTB: 650b rim brake wheelset

I had a set built on Shimano 105 hubs and Velocity rims at Universal cycles for $417, including shipping. I've been happy with them and I run 38 mm Pari Motos. On Saturday, October 1, 2022 at 12:29:18 PM UTC-5 Slin wrote: > For what it's worth, I've been happy with my Crust 650b wheelset. I've

[RBW] Re: WTB: 650b rim brake wheelset

For what it's worth, I've been happy with my Crust 650b wheelset. I've been commuting on it daily and going on fire roads once in a while for about 400ish miles? This is on Soma Cazadero 50mm tires set up tubeless. I did have to bust out the spoke key to true the rear wheel already. For the

[RBW] Re: WTB: 650b rim brake wheelset

You got me curious about the Crust wheels because I'm wishing now that I'd built my custom with a dynohub, so took a look. Note that the rear spacing is 130, my custom and most Rivs use 135. I don't know what frame you're building up so thought you should be aware of this. On Friday,

[RBW] Re: WTB: Billie Bar

Joe, I've sent you a private message.. Thanks, - Frank On Thursday, September 29, 2022 at 8:57:05 AM UTC-4 jga...@gmail.com wrote: > Looking to pick up a *Billie Bar* if anyone here has one that that they > would like to sell off to a good home. Shipping to 04330. I'll look to > find a

[RBW] Re: WTB: Small Riv bag, brown

The reason they didn't do too many brown sackville bags was because the fabric only came in too-narrow bolts. The small saddle bag was the biggest item they could achieve. If what you need doesn't turn up, keep an eye on the Acorn site. I think they still have brown in their production

[RBW] Re: WTB: 65cm Clem H (or something similar)

Clem L 64cm $800 Eugene, OR https://portland.craigslist.org/mlt/bik/d/eugene-rivendell-clem-frameset-64cm/7538553867.html -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it,

[RBW] Re: WTB: Riv "beater" or "beausage" bike/frame

Big fan of RB-Ts and XO-2s. Great to dream and put things out to the universe but also never hurts to have a back up plan  On Friday, September 23, 2022 at 8:22:14 PM UTC-7 jmlmu...@gmail.com wrote: > I have a hard time accepting the first few dings on my bikes and therefor > I baby the crap

[RBW] Re: WTB: Small Fabio's Chest Bag

Great recommendation Eric, I'm on it! On Saturday, September 24, 2022 at 11:02:05 AM UTC-7 eric...@gmail.com wrote: > Jared, if you haven't, check out the Crust Classified section on their > website. Lots of Fabs come and go over there and you could post a WTB. > On Saturday, September 24,

[RBW] Re: WTB: Small Fabio's Chest Bag

Jared, if you haven't, check out the Crust Classified section on their website. Lots of Fabs come and go over there and you could post a WTB. On Saturday, September 24, 2022 at 1:21:16 AM UTC-4 duh...@gmail.com wrote: > Hi all, > > Looking for a small Fabio's chest, neutral colors preferred. >

[RBW] Re: WTB: tektro fl540 brake levers, suntour bar-cons, cork grips

Thanks George, PM sent! On Wednesday, September 21, 2022 at 1:18:13 PM UTC-7 George Schick wrote: > Jamin - I have an old pair of Suntour bar-cons that date probably back to > the late 70's to early 80's. They can be yours for the asking. PM me if > you're interested and I'll ship 'em to

[RBW] Re: WTB: tektro fl540 brake levers, suntour bar-cons, cork grips

Jamin - I have an old pair of Suntour bar-cons that date probably back to the late 70's to early 80's. They can be yours for the asking. PM me if you're interested and I'll ship 'em to you. George (who is trying to thin out his parts boxes) On Wednesday, September 21, 2022 at 2:59:26 PM

[RBW] Re: WTB: tektro fl540 brake levers, suntour bar-cons, cork grips

here is the photo of the levers! On Wednesday, September 21, 2022 at 12:58:12 PM UTC-7 jamin orrall wrote: > Switching things up on my atlantis and I am looking for some parts that > are either out of stock or no longer made. > > all silver tektro fl540 brake levers > suntour bar-cons >

[RBW] Re: WTB: 700x35mm Tires

I've got a pair of used schwalbe in 700x35 I'd be happy to sell you. I forget the model name but they are slicks. PM me if interested On Tuesday, September 20, 2022 at 11:25:23 PM UTC-4 Nikko in Oakland wrote: > Hello! > > I found out I can't throw fenders over my 700x38mm tires. Anybody have

[RBW] Re: WTB: Nitto 11 cm Technomic Deluxe or Tallux

Are you sure you meant Deluxe, it is quite a bit shorter than the Tallux. The Technomic if memory serves is the same as the Tallux just with a different name, they can be found for reasonable prices new on line. Good luck. On Tuesday, September 20, 2022 at 11:31:14 AM UTC-4 Dave C wrote:

[RBW] Re: WTB: Nitto 11 cm Technomic Deluxe or Tallux

Sorry, I meant to say it needs to be 26.0 clamp diameter. On Tuesday, September 20, 2022 at 8:20:43 AM UTC-7 Dave C wrote: > Per subject, I need a 11 cm stem the tis either a Deluxe or Tallux. If you > have a gently used one I could buy, please let me know :) best, Dave Carroll -- You

[RBW] Re: WTB: Rivendell Rosco Baby frame (or bike)

You could always go with a 64 Clem, although it wouldn't fit your spouse. I think they have similarly lo00ng front end to the baby rosco. Noticed there's one for sale for $875+ shipping a few posts down. I don't think you could go wrong with that as a backup! On Saturday, September 17, 2022

[RBW] Re: WTB: Marks Rack

I'll write you privately Bill. Thanks for reaching out On Wednesday, September 14, 2022 at 4:34:40 PM UTC-4 William Humphrey wrote: > James-i have a new still in package mark's rack that i am willing to sell. > i can send photos tomorrow if you are interested, > Best, Bill > Viroqua, WI > >

[RBW] Re: WTB: Marks Rack

James-i have a new still in package mark's rack that i am willing to sell. i can send photos tomorrow if you are interested, Best, Bill Viroqua, WI On Monday, September 12, 2022 at 2:20:02 PM UTC-5 James wrote: > Anyone have one of these they are willing to sell? Just barely missed it > in

[RBW] Re: WTB: Brooks B67

Good luck on a B68. The only ones I see on eBay are outrageously priced. Some NOS from Japan for over $300. A B67 should be relatively easy to find, you may have to go off list. Good luck. On Wednesday, September 14, 2022 at 9:29:29 AM UTC-4 mcgr...@gmail.com wrote: > Hi, all. I'm

[RBW] Re: WTB: Big u-lock

Got one. On Saturday, September 10, 2022 at 4:05:41 PM UTC-7 Joe Bernard wrote: > I know it's a random thing to WTB but I've sold a few locks here over the > years and now need one back! I have a little one which is basically useless > to me, anybody got a big u-lock they're not using? > >

[RBW] Re: WTB: Nitto Fillet FacePlanter 4 bolt quill stem 25.4mm clamp 60mm or 85mm or Jim Stem

Bumping this back up. I see they have restocked these. Still interested in a trade or to buy a used one to save some $. Let me know if you have a 85mm face plater stem. Thanks, Brian On Friday, September 2, 2022 at 10:50:22 PM UTC-7 brizbarn wrote: > Anyone looking to sell or trade a Nitto

[RBW] Re: WTB: Albstache Bar

And found one, thanks all! On Thursday, September 8, 2022 at 10:55:05 AM UTC-5 Michael Ullmer wrote: > Still looking, anyone holding? > > On Tuesday, September 6, 2022 at 8:11:13 AM UTC-5 Michael Ullmer wrote: > >> My singlespeed Trek 520 is coming together nicely. It's currently set up >> with

[RBW] Re: WTB: Albstache Bar

Still looking, anyone holding? On Tuesday, September 6, 2022 at 8:11:13 AM UTC-5 Michael Ullmer wrote: > My singlespeed Trek 520 is coming together nicely. It's currently set up > with some mustache bars which seem just a bit too narrow for me. Albastache > bars would be perfect, anyone have a

[RBW] Re: WTB 47-49cm Saluki or Bleriot

Brian Just remember a Waterford AHH in 650B is essentially the same as a Saluki (per the RBW literature/statements) and maybe more available since they were around longer. The 650B AHH-MUSA were in 47cm and 50cm frames and the 50 has 1cm shorter effective TTL than a 47 (per the 2017 RBW geo

Re: [RBW] Re: WTB 47-49cm Saluki or Bleriot

I’d have no problem with a Bleriot or Saluki. I have a Saluki now and had a Bleriot for many years. They ride is very similar but I prefer the Saluki. Get whichever one pops up and both, in my size, fit 42mm tires easily. On Wed, Sep 7, 2022 at 7:11 PM Brian Morris wrote: > Hi guys- Thanks

[RBW] Re: WTB 47-49cm Saluki or Bleriot

Hi guys- Thanks for your inputs. Appreciate it! As from what I know, there’s 47cm Saluki Prototype (small batch hence rare to score) that runs on 650b wheels. I have a 650b wheelset that I want to use along with 42mm tires. Hence why I prefer a 650b Riv frameset. I’m currently riding extra

[RBW] Re: WTB 47-49cm Saluki or Bleriot

Brian Have you considered an early AHH in 650B. The 650B AHH's were the Saluki, according to all the RBW literature. The Waterford AHH frames were in 2cm increments, so they may fit you better, if you can find them. Can not remember when RBW changed the name from Saluki to AHH for the

[RBW] Re: WTB 47-49cm Saluki or Bleriot

The SH has the expanded geometry or whatever its referred to. It like all modern Rivendells will have less standover on the smaller models because of the sloping top tube. On Sunday, September 4, 2022 at 10:20:22 AM UTC-4 jrst...@gmail.com wrote: > I don’t trust listed standover height. I

[RBW] Re: WTB 47-49cm Saluki or Bleriot

I don’t trust listed standover height. I would ask owners to measure and ask what tires they have on. My 51cm Hillborne is about 30.5 inches, a bit over 75cm. My 54cm Saluki which is at the shop presently is about the same. My 55cm Bleriot was about 31” standover. Of course these measurement

[RBW] Re: WTB 47-49cm Saluki or Bleriot

The 50 cm Saluki is 75.0 while the Bleriot 49 cm is 75.1 for stand over So if a 49cm Bleriot would work, so will a 50 cm Saluki. Just hives you one more option. The 50 cm Rambouillet would also work (74.2 stand over) , but it has 559 wheels, not 584 as you expressed a preference for. It will

[RBW] Re: WTB Mark's rack

WAHOO! I've found a Mark's rack! @Jeff, I've seen some of the black coated Mark's rack still available for sale. If that's OK for you. On Sunday, August 28, 2022 at 8:58:37 PM UTC-4 lwt...@gmail.com wrote: > Don't know if you guys are looking for something for a canti bike but Velo >

[RBW] Re: WTB: broken in but good condition B17 Imperial (cutout)

Bump On Saturday, August 20, 2022 at 10:23:50 PM UTC-4 J S wrote: > With silver rails in brown or honey. > > Please PM me > > Thanks > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving

[RBW] Re: WTB Slimsucker

Did you ever find a slimsucker? I know they've restocked at Riv since you posted this. I'm about to list mine (royal blue) so I can upgrade to the regular saddle sack (just need that extra bit of room after a year of use). If you're all set, no worries. I'm posting it now either way, so if you

[RBW] Re: WTB Mark's rack

Don't know if you guys are looking for something for a canti bike but Velo Orange has these on sale. I put one on my Sam. Nice rack. https://velo-orange.com/collections/specials/products/vo-rando-front-rack-cantilever On Sunday, August 28, 2022 at 2:01:55 PM UTC-6 jeffbog...@hotmail.com wrote: >

[RBW] Re: WTB Mark's rack

I'm also looking for one of these but they appear to be sold out everywhere. Anyone have a lead? Jeff (Alabama) On Thursday, 18 August 2022 at 08:29:17 UTC-5 wallye...@gmail.com wrote: > Looking for a silver Mark's rack > > Thanks, > Wally > -- You received this message because you are

[RBW] Re: WTB: Soma Shikoro 38mm tires

Tires found. Thanks! On Wednesday, August 17, 2022 at 6:50:58 PM UTC-4 Eric Marth wrote: > Hi everyone — Do you have a set of lightly used 700C Shikoros in 38mm? Hit > me up! Looking for these for my partner's bike, we want to plump up from > 32s. > > Thanks! > -- You received this message

Re: [RBW] Re: WTB or TRADE for Albastache Bar

Hey Sean I have a trade in the works, but I’ll let you know if it falls through. I’ll have to check on the size. Sorry. -Nathan Mattia “I saw a tiger. Now I understand. I saw a tiger and the tiger saw a man.” > On Aug 19, 2022, at 2:37 PM, s...@austin.utexas.edu wrote: > > Hi Nathan, > >

[RBW] Re: WTB or TRADE for Albastache Bar

Hi Nathan, I have an Albstache bar. What size is the Jones bar? Sean On Monday, August 15, 2022 at 11:46:32 AM UTC-5 Nathan Mattia wrote: > Hello. > *Looking for an Albastache bar to set up on my new-to-me '87 Miyata 100LT* > > I have a Jones Bar SG 2.5 Loop in Silver Aluminum, still in the

[RBW] Re: WTB: 65cm Clem Smith Jr. H

Oops! Now I see you asked for "H", not "L"hope you find the bike of your dreams! On Thursday, August 18, 2022 at 10:48:38 AM UTC-7 JAS wrote: > Mitch, > There's a 64cm frameset w/wheelset on the Portland Craigslist. Looks like > the bike is in Eugene. > Good luck! > > Joyce > > On

[RBW] Re: WTB: 65cm Clem Smith Jr. H

Mitch, There's a 64cm frameset w/wheelset on the Portland Craigslist. Looks like the bike is in Eugene. Good luck! Joyce On Thursday, August 18, 2022 at 12:52:11 AM UTC-7 mitchel...@gmail.com wrote: > Hello! In search of a big ole' 65cm Clem Smith Jr. H... Been chasing one > of these for a

[RBW] Re: WTB: Sycip "singles bar"

I ordered the bar from Sycip earlier this week, I'll follow up with a ride report after I've put some miles on it. Jeff On Wednesday, 17 August 2022 at 09:01:08 UTC-5 chris feczko wrote: > > Hey Jeff, > > I have a singles bar I’ll sell for 30 + ship > > > Chris > On Saturday, 13 August 2022

[RBW] Re: WTB: Sycip "singles bar"

Hey Jeff, I have a singles bar I’ll sell for 30 + ship Chris On Saturday, 13 August 2022 at 16:25:36 UTC-4 jeffbog...@hotmail.com wrote: > Anybody have experience with this handlebar? Looking to replace the > Albatross on my Atlantis with something having less sweepback and this > seems

[RBW] Re: WTB: Sycip "singles bar"

I ride a modified Soma Osprey bar for light touring. Some rise, just the right wrist position for me. Modified by taking a centimeter off each end - the original is pretty wide. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To

[RBW] Re: WTB: Sycip "singles bar"

I was running the Soma Oxford bar (essentially the same as the Albatross) on my Midnight Special and wanted something a little wider and less swept back but still with some rise. I put the Sycip JJJ bar on and have been really liking it so far. It has similar sweep to the Singles Bar and is a

Re: [RBW] Re: WTB: Sycip "singles bar"

Jeff, Maybe I don’t “get rowdy” but sweep for me is a matter of wrist comfort not the ability to ride aggressively. Width does come into play for control which begins to matter more when riding aggressively. I have Tosco bars (with B17 and ergonomic) on my plus bike and I can “send it” just

[RBW] Re: WTB: Sycip "singles bar"

Great inputs here, thanks! I'm open to ideas for all-day and mixed terrain comfort as well. What grips, bars, and seats do folks like best for this type of riding? Coming from albatross, ergon, and b17 - maybe this is as good as it gets? Jeff On Sunday, 14 August 2022 at 01:07:59 UTC-5 Joe

[RBW] Re: WTB: Sycip "singles bar"

Sycip has several interesting bars that I hardly ever see on bikes. One is a flattish bar similar to Jitensha and Riv Nitto Wavie that uses road levers like an Albastache. Nifty! On Saturday, August 13, 2022 at 10:40:23 PM UTC-7 brizbarn wrote: > Never rode them or knew that they existed. I

[RBW] Re: WTB: Sycip "singles bar"

Never rode them or knew that they existed. I thought about buying some Nitto B812 bars . Almost the same as Singles Bar but more narrow, available only from Blue Lug. My friend has the wider Crust Juan Martin bars and likes them a

[RBW] Re: WTB: Sycip "singles bar"

yeah these were wider cruiser type bars but like Joe said, no rise.. reminded me of a narrower juan martin bar. On Saturday, August 13, 2022 at 1:42:02 PM UTC-7 Joe Bernard wrote: > I don't have one to sell but I've owned one, I really liked the grip > angle. No rise though so make sure you're

[RBW] Re: WTB: Sycip "singles bar"

I don't have one to sell but I've owned one, I really liked the grip angle. No rise though so make sure you're ok with a lower bar (or can raise your stem). On Saturday, August 13, 2022 at 1:25:36 PM UTC-7 jeffbog...@hotmail.com wrote: > Anybody have experience with this handlebar? Looking

[RBW] Re: WTB/ISO: Handsome laptop-sized pannier

Po campo has this pretty laptop pannier that looks like a regular tote bag. https://www.pocampo.com/collections/trunk-pannier-bags/products/bergen-laptop-pannier . I have this on one bike and an ortlieb on another. This one isn’t as voluminous as the ortlieb but holds plenty . On Thursday,

[RBW] Re: WTB/ISO: Handsome laptop-sized pannier

I tried a number of different options commuting with a laptop years back. My favorite by far was the now discontinued Ariel briefcase. There is one on eBay but it is well worn. That would be my recommendation if you can find one. Attachment is typical Arkel, so rock solid. I think the rain

[RBW] Re: WTB/ISO: Handsome laptop-sized pannier

Here is an example of what a quick search found https://www.etsy.com/ca/listing/569539749/waterproof-cycle-bag-for-women-and There are many other options and I have no experience with this seller or the products. I have had great kick shopping on Etsy though and can recommend the site in

[RBW] Re: WTB/ISO: Handsome laptop-sized pannier

One option is to have a look on Etsy. I did a search for bicycle briefcase and some nice leather ones popped up. Some are quite expensive, but Etsy is a good place to find utilitarian things that don't look utilitarian. IanA Alberta Canada On Thursday, August 11, 2022 at 8:25:02 PM UTC-6

[RBW] Re: WTB/ISO: Handsome laptop-sized pannier

Ortlieb used to make one called the "Downtown." I have one and it's super sturdy but it's unwieldy too. It's even uglier than a regular bag, but it gets the job done. Mine looks like this:

[RBW] Re: WTB:48cm Nitto Noodles

Thanks to everyone that responded to my query. I have found what I was looking for. James On Sunday, August 7, 2022 at 1:24:29 PM UTC-5 MoVelo wrote: > I'm wondering if anyone on this list might be holding the above referenced > item they would like to rid themselves of. Straight and true

[RBW] Re: WTB: Black B-17

For what it's worth, Eric, I responded to you with the "reply to author" button earlier this week. I didn't get anything back from you. Maybe my response didn't work, maybe you pipe stuff from me to spam, and maybe you've already got your saddle needs filled. At any rate, my response said

Re: [RBW] Re: WTB: Atlantis 61cm Toyo

No mid fork braze one or dual fork tip eyelets on my totally stock 2004ish Atlantis. > On Aug 3, 2022, at 09:50, Julian Westerhout wrote: > > Yes, I think that is the original fork. I think the bike on eBay is an early > Atlantis -- the early ones did not have mid-fork braze-ons and dual

[RBW] Re: WTB: Atlantis 61cm Toyo

There is some variation in Riv specs -- then and now! :) On Wednesday, August 3, 2022 at 11:56:55 AM UTC-5 David Pulsipher wrote: > Weird - I wonder if it was optional - I swear based on that link that I > can see dual fork-tip eyelets, but some without. A mystery! > > On Wednesday, August 3,

[RBW] Re: WTB: Atlantis 61cm Toyo

Weird - I wonder if it was optional - I swear based on that link that I can see dual fork-tip eyelets, but some without. A mystery! On Wednesday, August 3, 2022 at 10:50:55 AM UTC-6 weste...@gmail.com wrote: > Yes, I think that is the original fork. I think the bike on eBay is an > early

[RBW] Re: WTB: Atlantis 61cm Toyo

Yes, I think that is the original fork. I think the bike on eBay is an early Atlantis -- the early ones did not have mid-fork braze-ons and dual fork-tip eyelets. See photos in the Riv brochure linked here: http://notfine.com/rivreader/Brochures/Rivendell%20Frames%20Atlantis%2001.pdf (I tried

[RBW] Re: WTB: Atlantis 61cm Toyo

Is that the original fork? It doesn't have mid-fork brazeons - or eyelets on the top of the axle like most? Odd. On Tuesday, August 2, 2022 at 2:01:19 PM UTC-6 Will M wrote: > Vince, > > Did you see? Posted Monday. And located in Minneapolis. > > https://www.ebay.com/itm/115481524046 > >

[RBW] Re: WTB: Atlantis 61cm Toyo

Vince, Did you see? Posted Monday. And located in Minneapolis. https://www.ebay.com/itm/115481524046 (Not mine.) Will NYC On Friday, July 29, 2022 at 6:29:11 PM UTC-4 vince.a...@gmail.com wrote: > Hey everyone, > > Probably a long shot but I am hoping to track down a Toyo built 61cm >

[RBW] Re: WTB/WTT: a few used parts for a commuter

Also seeking: 80mm (or so?) *tall* quill stem with 26.0 clamp Also can trade: Velo Orange Constructeur REAR rack for your FRONT Found: brake levers! Hello! In search of the following, used but functional is fine, looking for > low prices on your unwanted bits here before I go searching online

[RBW] Re: wtb: Rivendell x Nitto threadless Bullmoose B901 bars

Appreciate the first hand input Brian. I think the B904 could work (if they were in stock somewhere), maybe add some bar extenders and lock on grips for a bit more width. I loved the quill Rivendell bullmoose bars I had on an Appaloosa for a few years, but they were lent to a friends bike when

[RBW] Re: WTB: 68cm Atlantis

Thanks, all! I'm 6'7", but mercifully my pbh is sort of 6'4"ish, round about 96.5 or 97, with a saddle height of 85.5 or 86 depending on a few things. As you can imagine, I spent years on (non-Riv) 60s and 61s running a ton of seatpost to make it work. My 60cm Platypus (love it) is going to

[RBW] Re: wtb: Rivendell x Nitto threadless Bullmoose B901 bars

whatbars.com has all 3 bars in the database for the visual overlay On Thursday, July 28, 2022 at 2:46:04 PM UTC-4 Coal Bee Rye Anne wrote: > I recall also being somewhat confused by the different versions when > previously considering some bar changes. The Fairweather is definitely > wider

[RBW] Re: wtb: Rivendell x Nitto threadless Bullmoose B901 bars

I recall also being somewhat confused by the different versions when previously considering some bar changes. The Fairweather is definitely wider at 710mm and has less backsweep, less extension, and no rise it seems:

[RBW] Re: WTB: 68cm Atlantis

That’s a real bike! So much to love. Enjoy -Kai On Monday, July 18, 2022 at 12:13:23 PM UTC-6 penne...@gmail.com wrote: > Following up here just to say that, against the odds, this worked > amazingly well. Took 9 days from the WTB being posted for me to take > delivery of a 68cm Atlantis

[RBW] Re: WTB: 68cm Atlantis

Wow that is such a good looking bike. I don’t think I’ve ever seen a 68 before, xl frames just look so dang good to my eye. I love how you’ve built it too. I’m starting to think I could fit a much bigger atlantis than I previously thought, inspired by this picture.. On Tuesday, July 19, 2022

[RBW] Re: WTB: 68cm Atlantis

What a beautiful Atlantis! At just over 6’4” I can appreciate these bikes and hope to someday own a larger Atlantis. Great work and I bet it rides nice. Randy On Tuesday, July 19, 2022 at 9:49:12 AM UTC-5 brettjc...@gmail.com wrote: > What a great looking bike. The pink case on the Wahoo is a

[RBW] Re: WTB: 68cm Atlantis

What a great looking bike. The pink case on the Wahoo is a really nice touch. On Tuesday, July 19, 2022 at 7:39:11 AM UTC-7 mark etze wrote: > That's a great looking Atlantis. I am always sorta looking for 68cm Riv's > and when I saw your WTB I just figured there was no chance you would get

[RBW] Re: WTB: 68cm Atlantis

That's a great looking Atlantis. I am always sorta looking for 68cm Riv's and when I saw your WTB I just figured there was no chance you would get one because they are so rare. Congratulations on finding 2. On Monday, July 18, 2022 at 2:13:23 PM UTC-4 penne...@gmail.com wrote: > Following up

[RBW] Re: WTB: Nitto Bosco Bullmoose 54cm

Found! -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to rbw-owners-bunch+unsubscr...@googlegroups.com. To view this discussion on the web visit

[RBW] Re: WTB: Large MUSA Shorts and/or Sackville Toursacks

DM sent. I lied to myself about my weight and shoulda got XL  On Monday, July 18, 2022 at 11:13:51 AM UTC-7 Daniel Rooke wrote: > Hello, > > I hesitated too long and missed out on the new MUSA black shorts. Does > anyone want to sell theirs - or any MUSA shorts in size large? I got a > pair

[RBW] Re: WTB: Nitto Bosco Bullmoose 54cm

I actually ended up buying a 58cm version to try out and compare to the 54 Toscos that came with my Clem L. It came out to around $170 with shipping which is a good deal (I think) On Thursday, July 14, 2022 at 4:04:20 PM UTC-7 jan.ot...@gmail.com wrote: > Thank you. I will check Blue Lug. > >

[RBW] Re: WTB - Nitto Faceplater stem, 120-130ish 25.4 clamp.

The 120/25.4s are sold out. I wanted also. Hope they restock soon. On Thursday, July 14, 2022 at 4:47:14 PM UTC-6 Johnny Alien wrote: > The Jim Stem is available and seems to be quite nice and slightly lower in > price. Just an option. 120 and 25.4 > > On Thursday, July 14, 2022 at 1:46:22 PM

[RBW] Re: WTB: Nitto Bosco Bullmoose 54cm

Thank you. I will check Blue Lug. On Thursday, July 14, 2022 at 3:23:45 PM UTC+2 Bones wrote: > Heads up, Blue Lug just restocked these in 54mm and 58mm > . > Shipping will no doubt be bonkers but at $91.66, I'm sure

[RBW] Re: WTB - Nitto Faceplater stem, 120-130ish 25.4 clamp.

The Jim Stem is available and seems to be quite nice and slightly lower in price. Just an option. 120 and 25.4 On Thursday, July 14, 2022 at 1:46:22 PM UTC-5 Cal Patterson wrote: > Bump, still looking if anyone out there has a long length faceplater stem! > > Thanks, > Calvin > > On Saturday,

[RBW] Re: WTB - Nitto Faceplater stem, 120-130ish 25.4 clamp.

Bump, still looking if anyone out there has a long length faceplater stem! Thanks, Calvin On Saturday, June 4, 2022 at 10:08:32 AM UTC-7 Cal Patterson wrote: > Hello all, > > If anyone's got one they'd part with, I am looking for a Nitto faceplater > stem, either the tigged one (FW30?) or that

[RBW] Re: WTB: Nitto Bosco Bullmoose 54cm

Heads up, Blue Lug just restocked these in 54mm and 58mm . Shipping will no doubt be bonkers but at $91.66, I'm sure it will come in well under retail price at Riv (if they ever get them again). Bones On Thursday,

[RBW] Re: WTB - 58cm Bosco or 60cm tosco

Here's a link (late 2020) from Radavist announcing the sale of a "Tosco-moose" through Rivendell: https://theradavist.com/rivendells-new-60cm-tosco-bar-comes-in-31-8-and-25-4-clamp-or-1-1-8-direct-clamp/ My pal Taylor has a set of these on his Gus, and they're the only ones I've ever seen. I'm

Re: [RBW] Re: WTB - 58cm Bosco or 60cm tosco

Oh cool! What is the width and stem reach on that model? Thanks for reaching out. -Chris On Thu, Jul 7, 2022 at 7:59 AM Ray Varella wrote: > Rivendell offered the Bosco bullmoose in 1 1/8th threadless back in 2017 > when they had the first run of tandems. > Not sure if they still offer it. > I

[RBW] Re: WTB - 58cm Bosco or 60cm tosco

I'd also love to pick up a set of Tosco bars, but the widest ones (650mm, preferrably). Everyone seems to have them on their bike builds, but they're not in stock anywhere. I guess they proved to be tremendously popular! Blue Lug says they don't expect to get anymore, and Riv says maybe

[RBW] Re: WTB - 58cm Bosco or 60cm tosco

Rivendell offered the Bosco bullmoose in 1 1/8th threadless back in 2017 when they had the first run of tandems. Not sure if they still offer it. I would consider selling the one I have if you strike out with them. Ray On Wednesday, July 6, 2022 at 11:27:51 PM UTC-7 foe...@gmail.com wrote:

[RBW] Re: WTB - 58cm Bosco or 60cm tosco

Alternatively, wondering if anyone can verify if a Tosco/bosco bullmoose exists for 1 1/8 steerers. If so, anyone know where I can find one? Thanks! On Monday, June 20, 2022 at 10:00:33 AM UTC-7 Chris Copeland wrote: > Hi folks, >I am going to switch up my cockpit soon, and I've already

[RBW] Re: WTB: Nitto 27f rack

Hey Nikko, I am in fact! It's the 700C version. On Monday, July 4, 2022 at 2:24:46 PM UTC-7 Nikko in Oakland wrote: > I’m looking to throw racks on my low trail bike but have the versioning to > add more weight. Anybody holding a 27F (Campee front rack)? -- You received this message because

[RBW] Re: WTB: Nitto 27f rack

Assuming the rack we're talking about (Nitto uses the name "Campeé" for about six different dissimilar models; *thanks*, guys) is the randonneur-ish style with the bag tombstone near the head tube and the detachable lowrider racks that mount to the main rack with hooks and screws, I'd like to

[RBW] Re: WTB: Nitto 27f rack

I've got two leads! Thanks all! On Monday, July 4, 2022 at 2:24:46 PM UTC-7 Nikko in Oakland wrote: > I’m looking to throw racks on my low trail bike but have the versioning to > add more weight. Anybody holding a 27F (Campee front rack)? -- You received this message because you are

[RBW] Re: WTB: Nitto F16 Handlebar Bag Support

pm sent On Tuesday, June 21, 2022 at 9:28:01 AM UTC-7 campyo...@me.com wrote: > Anybody have one of these that you don’t need? > > --Eric Norris > campyo...@me.com > Insta: @CampyOnlyGuy > YouTube: YouTube.com/CampyOnlyGuy > > -- You received this message because you are subscribed to the

[RBW] Re: WTB: Nitto lugged seatpost

seatpost found! On Tuesday, May 31, 2022 at 11:05:27 PM UTC-7 jamin orrall wrote: > Howdy, I am looking for a used nitto s-84 lugged seatpost for my musa > Homer. 27.2, 250mm. Let me know if you have one! > > Thank you, > Jamin Orrall > -- You received this message because you are

[RBW] Re: WTB: Replacement fork for 58cm Hillborne

I've had great luck with local builders. depending on what the damage is, you could likely get them rebuilt for a reasonable price. On Monday, June 13, 2022 at 12:11:10 PM UTC-6 eric...@gmail.com wrote: > Yeah, I'm okay! Thanks Brendon. > > On Monday, June 13, 2022 at 3:21:21 AM UTC-4

[RBW] Re: WTB: Replacement fork for 58cm Hillborne

Yeah, I'm okay! Thanks Brendon. On Monday, June 13, 2022 at 3:21:21 AM UTC-4 brendonoid wrote: > Weird wreck? Are you okay? What happened? > > I do not have a fork, sorry. > > > -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To

[RBW] Re: WTB: 57-59cm Sam/Atlantis/Appaloosa

Justin, I sent you an email... Thanks, - Frank On Sunday, June 12, 2022 at 8:56:59 PM UTC-4 alltheworl...@gmail.com wrote: > Hi all, > > New-ish lurker, first time poster. I had the good fortune to pick up Bill > Lindsay's Yves Gomez for my partner. I'm building that up to my partner's >

[RBW] Re: WTB: Replacement fork for 58cm Hillborne

Weird wreck? Are you okay? What happened? I do not have a fork, sorry. -- You received this message because you are subscribed to the Google Groups "RBW Owners Bunch" group. To unsubscribe from this group and stop receiving emails from it, send an email to

[RBW] Re: WTB: Silver Crank Arms - 178mm

David, Where are the cracks formed? My guess it is in the webbing between the crank arm and the chainring mounting arm? Is it possible to file the crack out to avoid it spreading? Thanks, Reginald Alexis On Thursday, May 26, 2022 at 12:11:15 PM UTC-5 David B wrote: > Been a while since I've

<    1   2   3   4   5   6   7   8   9   10   >