Re: [RBW] Re: V-Brake Measurement Request

Thank you, Will, for linking the archived v-brake page - I recall the original page existing but forgot to where the archives moved (bookmark now saved, thanks!) This helps a similar scenario on my Clem. I recall I first tried to install a Nitto Mini Campee 32f at some point in the past but

Re: [RBW] Re: V-Brake Measurement Request

I have found this list of v-brake arm length measurements useful on multiple occasions. Not directly related to request but may be of interest. Will On Sunday, September 17, 2023 at 7:47:59 PM UTC-4 Mark Schneider

Re: [RBW] Re: V-Brake Measurement Request

I should have mentioned this is on an Atlantis II. On Sunday, September 17, 2023 at 4:47:04 PM UTC-7 Mark Schneider wrote: > I have the same rack, and Deore XT V-brake, works fine. Just re-did the > cable today, cable is running on top. I don't bother with noodles. > > On Sunday, September 17,

Re: [RBW] Re: V-Brake Measurement Request

I have the same rack, and Deore XT V-brake, works fine. Just re-did the cable today, cable is running on top. I don't bother with noodles. On Sunday, September 17, 2023 at 1:46:01 PM UTC-7 Tony Lockhart wrote: > Thanks all! > > Just as I suspected, the Shimanos won’t work. BTW, forgot to

Re: [RBW] Re: V-Brake Measurement Request

Thanks all! Just as I suspected, the Shimanos won’t work. BTW, forgot to mention that my bike uses 700c wheels. Definitely too stubborn to remove my beloved Nitto rack, but curious enough to try the Tektros. Will post results when I get them in and attempt and install. Many thanks for the

Re: [RBW] Re: V-Brake Measurement Request

Assuming distance from brake boss to fender hole at the crown is consistent between models, you’re going to have a tough time fitting that rack with v-brakes. The straddle cable on my Shimano Alivios, used on my Appaloosa goes straight across the fender hole, if maybe slightly below. The case is