Link to a Facebook page I set up.https://www.facebook.com/groups/809524229962511
Thanks,Bob
-Original Message-
From: 'Ronald Donahue' via R/C Tank Combat
To: rctankcombat@googlegroups.com; Derek Engelhaupt
Sent: Thu, Apr 29, 2021 7:21 pm
Subject: Re: [TANKS] Any life left in this group?
Okay, who are you and where are you located?Thanks,Bob
-Original Message-
From: 'jvragu47' via R/C Tank Combat
To: R/C Tank Combat
Sent: Fri, Jan 1, 2021 9:01 am
Subject: [TANKS] Re: Interest in Pennsylvania
Yup. On Thursday, December 31, 2020 at 1:15:05 PM UTC-5 gettysb...@aol.com
w
I'm building a Stug III Tank Destroyer because I like the vehicle and
just want to play the game.
Bob
Red Lion, Pa.
In a message dated 10/30/2011 1:23:23 P.M. Eastern Daylight Time,
t...@me.com writes:
Thanks for the experienced advice and links!
On Oct 30, 2011, at 10:41 AM, _tiger
Bill,
Sorry that the weekend turned out this way. Hope you can make it up in the
spring. My Stug will be running by then.
I was thinking earlier. The original date that the battle was to be held,
the weather was sunny and the temps were in the 70's. Less than a month
earlier.
My trees st
Just checked the locale weather radar. The radar shows rain in Gettysburg
and Chambersburg. Snow and sleet on the south mountain ridge. 0635.
Bob
Red Lion, Pa.
In a message dated 10/28/2011 5:25:08 P.M. Eastern Daylight Time,
mikem5...@yahoo.com writes:
Heya all,
Stopped off in Kno
It's a dry heat.
Bob
-Original Message-
From: Cobra
To: R/C Tank Combat
Sent: Mon, Oct 24, 2011 3:01 pm
Subject: [TANKS] Re: Gettysburg
If tankers dont play in temps over 100 degrees, then SCAB is regulated
o a 3 month season of play. 6 months if you want to play nights.
Aaron F
CAB
Very nice work.
Bob
Red Lion, Pa.
In a message dated 10/17/2011 7:48:16 P.M. Eastern Daylight Time,
frj...@gmail.com writes:
Sorry, wrong to link me, this I think it works, greetings and good luck
to all.
_http://imageshack.us/g/854/dsc02629640x480.jpg/_
(http://imageshack.us/g/854/d
Added 3 pics in my Photobucket Stug album showing the motors mounted and
the chain installed. Let the track work begin...
Thanks,
Bob
Red Lion, Pa.
_http://s956.photobucket.com/albums/ae43/Gettysburg114th/StugIII/_
(http://s956.photobucket.com/albums/ae43/Gettysburg114th/StugIII
Got the motors mounted and the chain cut and installed today.
Bob
Red Lion, Pa.
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group
Why am I always the last to be picked at the battles?
Bob
-Original Message-
From: Frank Pittelli
To: rctankcombat
Sent: Fri, Oct 14, 2011 9:37 am
Subject: Re: [TANKS] Re: Another Rule Change Proposal
On 10/14/2011 5:35 AM, Bill Byrnes wrote:
Speaking of teams, what are the teams f
On Oct 13, 6:05 pm, gettysburg11...@aol.com wrote:
> I just posted more pictures of My Stug III on Photobucket.
>
> _http://s956.photobucket.com/albums/ae43/Gettysburg114th/StugIII/_
> (http://s956.photobucket.com/albums/ae43/Gettysburg114th/StugIII/)
>
> Thanks,
> Bob
&
my 32 ounce
bat. LOL.
John" much calmer now" P.
On Oct 13, 6:05 pm, gettysburg11...@aol.com wrote:
> I just posted more pictures of My Stug III on Photobucket.
>
> _http://s956.photobucket.com/albums/ae43/Gettysburg114th/StugIII/_
> (http://s956.photobucket.com/albums/ae43/G
I just posted more pictures of My Stug III on Photobucket.
_http://s956.photobucket.com/albums/ae43/Gettysburg114th/StugIII/_
(http://s956.photobucket.com/albums/ae43/Gettysburg114th/StugIII/)
Thanks,
Bob
Red Lion, Pa
--
You are currently subscribed to the "R/C Tank Combat"
I mounted my 3 idler wheels on the left side of the Stug just now.
Bob
Red Lion, Pa.
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the gro
Chris,
You should check Ebay for what the motors are selling for.
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://gr
I'm using a M-43 hat. Black. Very nice, and it's German.
Bob
Red Lion, Pa.
-Original Message-
From: Bill Byrnes
To: rctankcombat
Sent: Fri, Oct 7, 2011 2:04 pm
Subject: Re: [TANKS] Hats
As old and used as the hat is, it might be safer to battle over it than in it.
Founding Me
Oh, there's plenty of activity John. I'm in the work shop every night. More
shop time, less internet. That's a good thing.
Bob
Red Lion, Pa.
-Original Message-
From: John Pittelli
To: tank club
Cc: Frank Pittelli
Sent: Tue, Oct 4, 2011 9:57 pm
Subject: [TANKS] Just a test
Not
Come on John. You know it's because of all the Oktoberfest celebrations
you've been going to.
The Panzer II looks great.
Bob
Red Lion, Pa.
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to
Thanks Neil,
The sprockets are the originals that came with the motors and are not going
to be used. Frank just sent out two, 15 tooth sprockets Friday.
I just came up from doing some work mounting the hopper. I hope to start
working on the drive system and tracks next week.
Bob
--
You are
That didn't work. Try this.
Sorry,
Bob
_http://s956.photobucket.com/albums/ae43/Gettysburg114th/StugIII/_
(http://s956.photobucket.com/albums/ae43/Gettysburg114th/StugIII/)
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email
I just figured out that I have a Photobucket account. I loaded pictures of
my 1/6 scale Stug that I am working on. Sorry that the pictures are not in
order.
Hope this works.
Thanks,
Bob
Red Lion, Pa.
Saukopf
Pig's Head
_http://s956.photobucket.com/upload/albums/Gettysburg114th/_
I have my calendar marked.
Bobo
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat
Very, very nice job.
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat
All the road wheels and spacers for the guide teeth are now cut to the
correct diameter. I started gluing them up.
I need to make the drive wheel. Does anyone have a drawing of one they can
email me that will work with the tread mill belt tracks?
Thanks,
Bob
_Gettysburg114th@aol.com_ (mailt
I did not realize that Frank was so athletic.
Bob
The Stug fighting compartment is getting real close to being done.
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr
That's the gears that come on the motors. I have to get with Frank and change
them to the correct size/pitch.
Thanks,
Bob
-Original Message-
From: OdysseySlipways
To: rctankcombat
Sent: Wed, Jul 6, 2011 7:59 am
Subject: Re: [TANKS] Re: Stug prorgess
on your motors you have a la
I don't understand the question.
Bob
-Original Message-
From: OdysseySlipways
To: rctankcombat
Sent: Tue, Jul 5, 2011 9:45 pm
Subject: Re: [TANKS] Re: Stug prorgess
bob, why the big(ger) sprockets on the motors? just guessing, but is it due to
the size of the sprockets to fit th
Steve,
I look at the servo for the gun elevate.
Thanks,
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.googl
John,
Does not have to be Futaba, just Futaba compatible.
??
Thanks,
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http:/
Andy,
I sent you a link via private email that might be of some help regarding
motors.
Bob
Red Lion, Pa.
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegro
Andy,
Both links worked fine. Very nice work. That is a monster! What scale
are you building to?
Bob
Red Lion, Pa.
Time to go do some biking.
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send ema
Andy,
Thanks for the kind words.
excellent work Bob, your motors are the same as many on this site must
be something that's 'the in thing' on the other side of the world.
hope you don't mind me asking how much they cost?
The motors have built in gears. This eliminates the home built
transmission
Well said Aaron.
Bob
Red Lion, Pa
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat
I'm looking for a source for futaba 1/4 scale servo with metla gears?
Anyone have one?
Thanks,
Bob
Red Lion, Pa.
Saukopf
(Pigs Head)
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rct
Thanks!!
I did some, well a lot of climbing this morning on my bike out near the
Gettysburg tank battle site. The ride started out at 59 degrees F. Nice Cat 4
climb of 5 + miles. Getting back to tanks.
I completed the upper hull engine compartment area and managed to get the
sides of the figh
Followed by their hands in the air.
:)
Bob
-Original Message-
From: Dave D.
To: rctankcombat
Sent: Mon, Jun 27, 2011 11:20 am
Subject: Re: [TANKS] What constitutes "front" for an SU-152?
And trust me Frank, as this was not the intention of my original
uestion
But I believe t
I recieved my motors from Joe Saturday. Sat them in the hull to check the
fit.
I glued more wheels today. Scaled the upper hull on the 1/35 scale model
up to 1/6 scale. I cut the fenders and have them tacked on to the lower
hull. The fenders will be the base for the upper hull and will li
Motors came yesterday from Joe!! Thanks for getting them here so quickly
Joe.
Bob
Red Lion, Pa.
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.co
Andy,
While it doesn't answer your question. Have you thought about going with
the smaller caliber marker that the guys are using in the Panzer II? Tank
#T077
Thanks,
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroup
The basic lower hull is complete. Birch aircraft plywood for the upper
hull has been ordered from Balsa USA. I started laying out the upper hull on
paper.
Bob
Red Lion, Pa.
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegrou
Thanks Steve,
That means a great deal coming from you. Your tanks are some of the best
looking and engineered that I have seen.
Up from the shop for a drink. I have three more pieces of the lower hull
cut, glue and screwed in place. I am going to start laying out the upper
hull on card stock.
I noticed that Joe.
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat
Now gentlemen, that was certainly a great time!
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/gr
Are the 50 cal. markers the wave of the future?
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat+unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/gr
Looks like I will be taking part in a bicycle ride from Harpers Ferry to
York tomorrow and Sunday morning.
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@goo
Thanks for the info Steve.
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcombat
Looking for a source for a cheap 12 volt auto door lock actuator?
Thanks,
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at h
Well thank you Steve. I appreciate that.
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rc
I'll be there to play. What should I bring?
Thanks,
Bob
Joe will you be sending directions out?
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Anyone looking to do a day trip out to Aberdeen on a Saturday?
Thanks,
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http
Nice pics Doug. Thanks for posting.
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankc
You could certainly say that Doug.
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com/group/rctankcom
Any good sources out there for Stug plans?
Thanks,
Bob
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.com
_http://www.co2science.org/_ (http://www.co2science.org/)
Found this site Chris. Anything could be possible.
Bobo
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr.
Guys,
I am still trying to unload the Tiger I that I have. Asking $290.00.
Thanks,
Bob
Red Lion, Pa.
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.
I have to get it from our shipping department at my work.
--~--~-~--~~~---~--~~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googleg
17356
--~--~-~--~~~---~--~~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://groups.google.co
Red Lion, Pa. 17356
--~--~-~--~~~---~--~~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://g
I would have to get an estimate from Fedex freight.
I would need you to send me you shipping address to my
_gettysburg11...@aol.com_ (mailto:gettysburg11...@aol.com) address.
Thanks,
Bob
--~--~-~--~~~---~--~~
You are currently subscribed to the "R/C Tank Combat" g
Yes, the tanks is still available.
Thanks,
Bob
--~--~-~--~~~---~--~~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
V
Not at this time.
--~--~-~--~~~---~--~~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at http://grou
I live in Red Lion, Pa. The reason for selling is because I have gotten
hooked up with a sponsored bicycle team and spend most my time training. I
have more invested in a bicycle than some people have in cars. I think I can
ship the tank from work. I would have to build some sort of wooden b
Derek,
The tank has the following. I will start with the turret:
Spyder marker, mounted and hooked to a auto door lock for the trigger.
Barrel.
Elevate for the marker.
Rotate via a motor and friction wheel and a Lazy Susan.
Magazine
Turret cover
The hull is constructed of Birch 5 ply aircraft pl
The Tiger I that I posted pictures of last week is still available.
I am looking to get $475 for it.
Thanks,
Bob
--~--~-~--~~~---~--~~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsu
Derek,
I have lowered the price to $475.
Thanks,
Bob
--~--~-~--~~~---~--~~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups
Chris,
You saw the tank a couple of years ago in Gettysburg.
Thanks,
Bob
--~--~-~--~~~---~--~~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsu
You are both correct.
Bob
--~--~-~--~~~---~--~~
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to rctankcombat@googlegroups.com
To unsubscribe, send email to rctankcombat-unsubscr...@googlegroups.com
Visit the group at htt
Derek,
The measurements are as follows:
Hull length 39"
Hull width 20 5/8"
Hull height 8 7/8"
Hull and turret height 13 7/8"
These are all approx. measurements. Might have to add a 16th here or there.
I talked to Frank who is one of the Founders and has seen the tank. I
asked him wh
Hey guys,
I have come to the conclusion that I will never be able to complete my
Tiger I. I am looking to see if there is anyone looking to buy a tank.
I have pictures that I can send via email for anyone interested.
Here is what you would get:
Tiger I hull, constructed of 1/4" birch aircraft
Anyone have the link for the wheels that Joe and Will had that looked like
Tiger 1 wheels? Will's link the wheels were orange with black tire area.
Thanks,
Bob
Red Lion, Pa
**Can love help you live longer? Find out now.
(http://personals.aol.com/articles/2009/02/18/longer-lives-throu
Mike,
I have the 32 plywood wheels. Just can't decide whether or not to use them.
Bob
**A Good Credit Score is 700 or Above. See yours in just 2 easy
steps!
(http://pr.atwola.com/promoclk/10075x1215855013x1201028747/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668
Hello all,
Has anyone ever used anything like 1/2 "V" belt for their guide teeth in
their track. I have 32 wheels made up out of 9 mm plywood. I was thinking
that
there may be less wear on the plywood wheels if this method was used. Speaking
of wheels, I really don't know if I should use the
Marc,
I'm glad your getting senile, I missed the address the last time it was
posted.
Thanks,
Bob
**Life should be easier. So should your homepage. Try the NEW
AOL.com.
(http://www.aol.com/?optin=new-dp&icid=aolcom40vanity&ncid=emlcntaolcom0002)
--~--~-~--~~-
In a message dated 11/16/2008 2:38:04 AM Eastern Standard Time,
[EMAIL PROTECTED] writes:
http://i91.photobucket.com/albums/k298/2AIFtigerace/Tanks/104.jpg
Very nice work Chris.
Bob
**Get the Moviefone Toolbar. Showtimes, theaters, movie news &
more!(http://pr.atwola.com/promoclk/
74 matches
Mail list logo
