I just wired a 50 kw array using Mcmaster-carr #7429K42 www.Mcmaster.com
uv-resistant cable clamps. They worked great, attached to the Unirac rail
with SS screws. Certainly much neater than tie-wraps. I was never able to
get tie wraps to look that good in any installation. These little clamps,
Hi Allan,
So once the customer has done this, it never happens again?
jay
peltz power
On Dec 17, 2008, at 12:04 PM, Allan Sindelar wrote:
Wrenches,
On the issue of Outback Mates failing to control the AGS function
properly, I forwarded a few of the recent posts to one of our off-
grid
Hi Tump,
So just got a call from a customer.
Mate not auto starting the generator.
Mate set to auto.
Will start manually.
Time and date are perfect.
Volts got to 1.5v under 2 minute start and no start.
Getting frustrating.
jay
peltz power
___
Friends:
We have installed a number of single XW installations but only one dual
XW. The dual system is giving us some problems. When the generator is
started, both inverters will charge, but aft a minute or so, the slave will
stop charging. This is even with very low batteries where both
Hi William,
I have a couple of spares that I carry and just have them reprogrammed.
Just getting very old.
jay
On Dec 20, 2008, at 10:16 AM, William Miller wrote:
Jay:
I just had one of these yesterday. Had a rebuilt Mate on the
truck, swapped it out and problem solved. I suggest you
Hi Kirk,
Love it. Sounds clean. I think I understood your route. Question, was
this a ground mount array or at significant tilt, and would these nifty
2-conductor clamps and SS screw attachment be just as easy to attach and
work with for flush roof mounted array wire management along rails? I
Friends:
I need to build a Xantrex SWI cable (the sync cable for two SW
inverters). Do any of you have the specs. for one of these?
Thanks in advance, and happy solstice!
William Miller
___
List sponsored by Home Power magazine
List Address:
Hi, a client's rodents recently chewed up their SWI sync cable. I found that
the Trace connectors can be opened carefully, then reused with new ribbon cable.
20 conductor ribbon cable was not available in my podunk town but I had some
10 conductor ribbon with the correct spacing (.1 inch if I
Jim,
If you look at it the right way it may be a blessing in disguise.
We retired our old pathfinder for the Solmetric SunEye. It has become an
extremely valuable tool for site analysis as well as for marketing.
Our customers love that they can see right there on the spot what their solar
9 matches
Mail list logo
