Re: [RE-wrenches] Generac Ecogen (was RE: generator suggestions)

2013-07-07 Thread jay peltz
Hi Kirk One trick I learned from my generator guy is to hook up the remote start to the manual on position This bypass's the auto position and the extra load on the battery Best I can tell only difference on the Koehler anyway is how fast it starts. On auto right now On manual a few seconds

Re: [RE-wrenches] Generac Ecogen (was RE: generator suggestions)

2013-07-07 Thread John Blittersdorf
Kirk, I have 4 Eco-gens out there and working fine. I'm not sure about the phantom load but it does include the battery charging. My guess is that after the battery recovers from starting, the load probably drops to minimal. There is an hour meter in the menu under state which is many

Re: [RE-wrenches] Generac Ecogen (was RE: generator suggestions)

2013-07-07 Thread penobscotsolar
Hi Kirk, The Ecogens we have out there (3) have been working great, without needing service. We do leave the switch set to manual which I don't believe has a phantom load. It so, it is very minimal as we haven't had customers complaining of lack of power. I continue to recommend them for small

Re: [RE-wrenches] Generac Ecogen (was RE: generator suggestions)

2013-07-07 Thread Kirk Herander
Jay – I’ve done this before with the Kohler RES series to eliminate the phantom in auto-mode, BUT stressing to all that the generator could start automatically without notice – especially to the generator tech. As always, best to disconnect the starting battery when servicing. Kirk

Re: [RE-wrenches] Xantrex Power Station Manual and Gen relay

2013-07-07 Thread Drake
I'm looking for one also to purchase or rent. At 02:47 PM 7/6/2013, you wrote: Thanks boB and Jay. I'm familiar with the GSM, just didn't remember it was for the Power Station. Anyone one know where I might find an ALM or GSM? Howie Howie Michaelson Catamount Solar NABCEP Certified PV

Re: [RE-wrenches] Xantrex Power Station Manual and Gen relay

2013-07-07 Thread Howie Michaelson
This looks like the third year I'm going to miss SF - summers are just to busy and short. Kirk had already let me know he had a few so I signed on with him. If that doesn't work out I'll check back with you. Thanks for the note. Howie Howie Michaelson Catamount Solar NABCEP Certified PV

Re: [RE-wrenches] Xantrex Power Station Manual and Gen relay

2013-07-07 Thread Howie Michaelson
Sorry for the on list post - I thought I sent it off list... Howie Michaelson Catamount Solar NABCEP Certified PV Installer 802.272.0004 Sent from my cellphone - please excuse my brevity and/or typos. d...@foxfire-energy.com wrote: ___ List sponsored

Re: [RE-wrenches] Generac Ecogen (was RE: generator suggestions)

2013-07-07 Thread Allan Sindelar
Short message, off on a week long mountain bike trip (Durango to Moab) with 15yo son... I believe that the phantom load is 8 watts continuous if run off of AC. I have not tested this myself, as I had inverter AC at the Bennie hookup location and I'm hard wired so can't test it with a