I think Gary may be overthinking this. If the micro-inverters have a GEC
lug then you'll need to run a GEC.
If you run your GEC to a ground rod, then you don't need to use one
larger than #6 per 250.166(C). (note also (D) and (E) but they're less
useful to you here)
/
Commentary:/
It makes
Hi Charlie,
I can't help but be intrigued by your setup here. It seems like the
complete opposite of where our commercial systems are going with
transformerless 1000 V inverters entering the market. Anyway, I'm sure it's
an interesting project and there may very well be advantages to the system
I believe this is the tenK solar product being talked about.
Jay
Peltz power
Sent from my iPhone
On Sep 18, 2013, at 8:49 AM, August Goers aug...@luminalt.com wrote:
Hi Charlie,
I can't help but be intrigued by your setup here. It seems like the complete
opposite of where our
Dave, Gary, and Charlie,
First, the directions from the manufacturer should be the guide as to
whether a GEC is required or not. Just because a GEC terminal is located on
the equipment, does not mean that one is required. Case in point-Enphase's
new IG product does not require a GEC, yet it
Nick,
Thanks for the clarification-it is a mysterious threaded hole..
Bill.
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Nick Soleil
Sent: Wednesday, September 18, 2013 10:19 AM
To: RE-wrenches
Subject: Re:
Hi Bill,
We wanted to prevent any confusion with inspectors on this topic. So the
production units don't even have the threaded PEM nut; just a hole.
On Wed, Sep 18, 2013 at 12:42 PM, Bill Brooks billbroo...@yahoo.com wrote:
Nick,
** **
Thanks for the clarification—it is a mysterious
(20130918) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
--
___
List sponsored by Home Power magazine
List
7 matches
Mail list logo