Dave,
This was a Wrenches discussion topic, somewhere between 2001 and
2005.There was a fundamental incompatibility between the SW series
and the electronics of certain new model washers. The early Maytag
Neptunes and front-loading, electronically-controlled Frigidaires
Dave,
Do you know what it is that's failing?...electronics or motor? Is it
the same in both? Have these failures been happening since the 4048 was fired
up or more recently? Is there a lot of generator run time?
Bill
Feather River Solar Electric
- Original Message -
Fr
HI Dave,
Could be the SW, but I would check it on a scope to see the wave form.
Lots of other reasons for the failure.
New inverter might be in order, but I'd check to see what else is going on.
jay
peltz power
On Mar 26, 2015, at 5:24 PM, "Dave" wrote:
> Wrenches,
>
> Older off grid syste
Wrenches,
Older off grid system having trouble with Frigidaire washer and dryer
needing expensive repairs every year or so when run on a Xantrex SW 4048/S
inverter manufactured in June 2005.
Not one of my installs so I don't know the particulars.
Homeowners are looking for advice on wha
The website doesn't list all products, but their CV Constant Voltage series
will do this. Built to order to your needs. Give them a call.
http://www.solarconverters.com/index.php/products/85-dc-dc-step-up-controllers-cv
Kevin
-Original Message-
From: RE-wrenches [mailto:re-wrenches-bou
There is a liniar converter avalible they convert either from 48 to 24 and
the other way too. I am away till next week so i cant the brand.
Jerry
On Mar 26, 2015 10:47 AM, "Chris Worcester"
wrote:
> Hello fellow wrenches;
>
> We are attempting to control a small 24 VDC motorized damper motor on a
Hi Dana,
Check Mouser or Future electronics.
BZ Products INC.
8801 Gravois Rd.
St.Louis MO 63123 USA
314-644-2490
www.bz-products.net
On 3/26/2015 12:28 PM, Dana wrote:
Hey All,
I am tasked to supply a frontage sign that uses 24 VDC but the voltage
window is a low 24 & max of 25-26 volts.
Hello fellow wrenches;
We are attempting to control a small 24 VDC motorized damper motor on a
nominal 48 VDC off grid system. The damper is next to an Air Heater divert
load in a wall that is controlled by a MorningStar TS60 to take the top off
the 48 V battery bank at 56.8 volts. We have a 48 VD
Hey All,
I am tasked to supply a frontage sign that uses 24 VDC but the voltage
window is a low 24 & max of 25-26 volts.
Is anyone aware of an efficient DC/DC fixed power supply 24-29 vdc battery
range and 24-26 vdc output/ Load is 60-70 watts?
-
Do,you have a web site for them?
And do you mean 220kwh?
Jay
Peltz power
> On Mar 26, 2015, at 1:58 AM, Max Balchowsky wrote:
>
> Does anyone have any experience with the PowerGrid battery system (by Clean
> Energy)? we are getting ready to install a 27kW array with a 22kWH Battery
> Bank
Does anyone have any experience with the PowerGrid battery system (by Clean
Energy)? we are getting ready to install a 27kW array with a 22kWH Battery Bank
and 4 Schneider/Xantrex XW 6848's.
Max Balchowsky
Design Engineer
Golden Bridge Development
1048 Irvine Ave Suite 217
Newport Beach, Ca. 926
11 matches
Mail list logo
