Re: [RE-wrenches] After market SMA TL inverter shade covers

2016-08-26 Thread Peter Giroux
Andrew We had some problems last year with some of the fronius primos leaking in rain / wind conditions. Customer had a local shop tig weld an aluminum shell / box that went around the unit. Had a shelf at the top that stuck out like the brim of a hat. Worked great. We had also looked for

Re: [RE-wrenches] NRTL certification question

2016-08-26 Thread Allan Sindelar
Jerry, it is for off grid, but that's not synonymous with non permitted. This is a house being built with standard permits. Unlisted modules are only appropriate for "unpermitted owner-built homes too remote to be discovered by the AHJs". It's a specific category of its own. We have

Re: [RE-wrenches] NRTL certification question

2016-08-26 Thread Brian Teitelbaum
Hi Allan, TUV is now an accepted NRTL, but the equipment still has to Listed to applicable UL Standards to mean anything. Testing only to European standards doesn’t cut it here. “CE” is meaningless here also. Brian Teitelbaum AEE Solar *From:* RE-wrenches

Re: [RE-wrenches] NRTL certification question

2016-08-26 Thread Jerry Shafer
Wrenches No UL or ETL they sould like for off grid non permitted non warranty systems, years ago they used to be called "red label" Jerry On Aug 26, 2016 8:56 AM, "Allan Sindelar" wrote: > Wrenches, > And now for something completely different... are TUV Rheinland or CE

[RE-wrenches] NRTL certification question

2016-08-26 Thread Isaac Opalinsky
Allan, OSHA maintains the list of NRTL’s: https://www.osha.gov/dts/otpca/nrtl/nrtllist.html. TUV Rheinland is included, but CE is not a NRTL – it is a manufacturer’s declaration of conformity (literally translated is European Conformity) to European requirements for product conformity. As a

[RE-wrenches] After market SMA TL inverter shade covers

2016-08-26 Thread Solar Energy Solutions
Has anyone used or had success with any kind of a shade cover?.. specifically for the SMA TL inverters?  We have one that is going to get hit by the sun pretty good. Thanks!  Andrew KoyaanisqatsiPresidentSolar Energy Solutions, Inc. The BRIGHT CHOICE Since 1987, helping you and your Portland

[RE-wrenches] NRTL certification question

2016-08-26 Thread Allan Sindelar
Wrenches, And now for something completely different... are TUV Rheinland or CE module certifications valid yet in the US? I was called to consult for an off grid client who had purchased 40 250W generic Chinese modules through a friend who got them on Ebay... yeah, right. I got to be the

Re: [RE-wrenches] Low array voltage stumper on legacy system

2016-08-26 Thread Allan Sindelar
Mike, Jay's suggestion to turn off string three, the low one, is good. Plus I can guide the homeowner by phone, thus avoiding the cost of another site visit, so that adds appeal. I just spoke with him. While he lacks the DMM and DC amp clamp, he is going to record V and I in and out for each

Re: [RE-wrenches] Grundfos SQ. power curves

2016-08-26 Thread Jay
Hi all I'm not looking for the SQFLEX but the SQ. Thanks Jay. Sent from my iPhone > On Aug 26, 2016, at 8:29 AM, Allan Sindelar wrote: > > > Allan Sindelar > al...@sindelarsolar.com > NABCEP Certified PV Installation Professional > NABCEP Certified Technical

Re: [RE-wrenches] Low array voltage stumper on legacy system

2016-08-26 Thread Mike Kocsmiersky
Your measurements of the Isc for the four stings seems to be odd in string 3 with only 2.4A. However, when you measure the circuit under load, you are getting 14.6A from all 4 strings, which averages 3.65A. I’d say check that string again, perhaps the current clamp wasn’t zeroed or something.

[RE-wrenches] Grundfos SQ. power curves

2016-08-26 Thread Jay
> Hi all, I can't find Grundfos SQ power curves, any ideas of where or anybody have them Thanks Jay ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings:

[RE-wrenches] Fwd: Schneider Electric possible quality issue affecting the Conext SW 4048

2016-08-26 Thread Tump
FYI dated 8/25/16 CSW4048 - AC output over voltage, unit is faulting with a F02 during load > Begin forwarded message: > >> >> Sorry for the delayed reply, I have been extremely busy today, I also tried >> calling you directly, I left a VM with the case notes and my contact >> information.

Re: [RE-wrenches] Low array voltage stumper on legacy system

2016-08-26 Thread Allan Sindelar
Steve, Yes, in the same sequence: 75.5V, 73.8V, 73.9V, 74.0V. All just about what I'd expect. Brian, I have seen that with KC120s over the years - good Voc and Isc but no MPP. That's a known failure that Kyocera (to their credit) continues to warrant 15 years out. But I haven't seen it with