Re: [RE-wrenches] Schneider SW 4048 error

2019-02-28 Thread Glenn Burt
This number and extension should only be used if you have previously filled out their online form to be included as an installer in their records. We had an extensive discussion revolving around this new procedure in the recent past here on this forum. From: RE-wrenches On Behalf Of

Re: [RE-wrenches] Schneider SW 4048 error

2019-02-28 Thread Howie Michaelson
Getting on the wrenches is perhaps a good enough filter for this purpose, but remember that the archives are available to anyone who takes the time to search, which may be a big enough impediment to most . Howie On Thu, Feb 28, 2019 at 8:16 PM Mac Lewis wrote: > Thanks Howie, > > Yes, I am

Re: [RE-wrenches] Schneider SW 4048 error

2019-02-28 Thread Mac Lewis
Thanks Howie, Yes, I am aware of this. I think getting on the REwrenches list is rigorous enough to allow a quick pass, but I could be wrong and/or overly optimistic. I fully understand Schneider's position on this and appreciate it (I really do). It is an easy filter to work through but a bit

Re: [RE-wrenches] Schneider SW 4048 error

2019-02-28 Thread Howie Michaelson
Mac, You may already know this, but Schneider has requested that installers not pass out their live tech phone number. I assume it is because they are trying to vet who calls in on it, keeping it to working wrenches and designers in order to keep our wait times and their costs down. You might

Re: [RE-wrenches] Schneider SW 4048 error

2019-02-28 Thread Dave Angelini Offgrid Solar
Hi Laura, Is this your CSW? If so you should get on their dealer/installer list and it will make it faster next time. Did you look at if there were warnings also? Is there a combox. If SCP only look at "view device info" under the CSW. It should be se set for advanced settings. Is there

Re: [RE-wrenches] Schneider SW 4048 error

2019-02-28 Thread Mac Lewis
Hi Laura, First thing I would try is to update the firmware. Eeprom is a type of memory so maybe you have a bad board but I have remedied this error with a firmware update. Here is what works with Schneider tech support last I checked: (833)391-8640 option 8 Good luck On Thu, Feb 28, 2019 at

[RE-wrenches] Schneider SW 4048 error

2019-02-28 Thread Laura Conchelos
Howdy, I have a Schneider 4048 being used off-grid and it keeps turning off. It shows errors 52-56, all of which are EEPROM ERROR. There is no fault light and the inverter can be turned on again and runs for a couple of hours before it seems to happen again. In the manual it says: "Clear the fault