When I was a C-46 contractor in California from 2000 to 2012, I used to do
about 1/3 of my business as grid-tied battery backup and off-grid. I came to
focus on the Outback solutions in general, and later the Radian 8048 and 240
A-hr AGM batteries.
That was obviously a while ago. I became an e
William,
Our typical battery support : Start with concrete slab
which should be the foundation for the shed the power system is in, next
pressure treated wood of various dimensions depending on battery height,
next 3/4" plywood, next 40 mil PVC shower pan liner on bottom and runs
Friends:
For years we have been supporting large form-factor flooded battery trays
by setting them on pressure treat 4X4s. We have developed a cradle we bolt
onto a special-order, narrow pallet jack and roll them over the wood
supports. It is not a seismic solution, but it works.
Just today
I'm talking about systems that exceed 52 IQ7+ microinverters. These systems
require an alternative AC load center. I have actually used the IQ combiner
to just house the Envoy in the past for simplicity's sake even though the
cost is somewhat higher. It is interesting to note that Enphase probably
4 matches
Mail list logo
