I have found that single point grounding in large complex systems can
solve a lot strange problems. Just a thought.
BZ Products INC.
8801 Gravois Rd.
St.Louis MO 63123 USA
314-644-2490
www.bz-products.net
On 11/10/2016 3:20 PM, Drake wrote:
Is your array on a large metal roof, or is it where
The heat cycle sterilizes the dishes and should used.
BZ Products INC.
8801 Gravois Rd.
St.Louis MO 63123 USA
314-644-2490
www.bz-products.net
On 8/31/2016 3:50 PM, Kevin Pegg wrote:
For energy budgeting, I use 0.5 kWh per cycle with no heat dry / hot water temp
boost. If using heat dry or
Hi Dana,
Check Mouser or Future electronics.
BZ Products INC.
8801 Gravois Rd.
St.Louis MO 63123 USA
314-644-2490
www.bz-products.net
On 3/26/2015 12:28 PM, Dana wrote:
Hey All,
I am tasked to supply a frontage sign that uses 24 VDC but the voltage
window is a low 24 max of 25-26 volts.
Why not use a 2:1 step down transformer? The open circuit VOC would be
manageable. Cost is reasonable too.
Frank Lewon BZP.
BZ Products INC.
8801 Gravois Rd.
St.Louis MO 63123 USA
314-644-2490
www.bz-products.net
---
This email has been checked for viruses by Avast antivirus software.
, that might put the volts to low and get line loss issues.
My hydro guru uses multi tap transformers to get the best output voltage.
You'll need three, so,they don't have to be large for a 1kw turbine.
Jay
Peltz power
On Mar 20, 2015, at 5:59 AM, frank -bz products b...@brick.net wrote:
Why
Gust a thought. Look into switch mode power supplies. DC to DC buck
converters. They are very efficient and not to expensive. Try Mouser and
Future Electronics for industrial grade products.
Frank Lewon
BZ Products INC.
8801 Gravois Rd.
St. Louis MO 63123 USA
---
This email is free from
2 more cents worth. If your MPP control is powered by both the battery
and PV source (diode orred) you should be able to pump solar direct.
Several of our customers do this even though we do not specify the
feature. You also get great locked rotor start current. The LCB line we
made for Windy
2 cents worth. Boost/buck boost configuration converters use to increase
the PV voltage are only about 80 to 85 % efficient.
--
Frank Lewon
BZ Products INC.
8801 Gravois Rd.
St. Louis MO 63123 USA
___
List sponsored by Home Power magazine
List
Look into Amodon ferrite cores.
On 2/19/2013 1:30 PM, Vince McClellan wrote:
Hello Wrenches
I'm having an issue with a pair of Outback inverters producing
electromagnetic interference with the low band radios at a site we
installed recently. Other than a Faraday cage does anyone have any
9 matches
Mail list logo