Cap_mini]
> Lic 773985
> millersolar.com <http://www.millersolar.com/>
> 805-438-5600
>
>
>
> *From:* RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] *On
> Behalf Of *Jerry Shafer
> *Sent:* Sunday, November 04, 2018 6:37 PM
> *To:* RE-wrenches
> *Subje
sts.re-wrenches.org] *On
Behalf Of *Jerry Shafer
*Sent:* Sunday, November 04, 2018 6:37 PM
*To:* RE-wrenches
*Subject:* Re: [RE-wrenches] Conduit Bending
There is no substitute for practice, Utube videos only go so far, get some
pipe and a bender and start working. It's interesting how
ase consider the environment before printing this email.
>
>
>
>
>
> *From:* RE-wrenches *On
> Behalf Of *toddc...@finestplanet.com
> *Sent:* Friday, November 02, 2018 2:56 PM
> *To:* RE-wrenches
> *Subject:* Re: [RE-wrenches] Conduit Bending
>
>
>
>
>
t;
>
>
>
>
> From: RE-wrenches <mailto:re-wrenches-boun...@lists.re-wrenches.org>> On Behalf Of
> toddc...@finestplanet.com <mailto:toddc...@finestplanet.com>
> Sent: Friday, November 02, 2018 2:56 PM
> To: RE-wrenches <mailto:re-wrenches@lists.r
-136 www.solarwork.biz
>
> *"Responsible Technologies for Responsible People since 1988" *
>
> *P* Please consider the environment before printing this email.
>
>
>
>
>
> *From:* RE-wrenches *On
> Behalf Of *toddc...@finestplanet.com
&g
ttp://www.solarwork.biz>
www.solarwork.biz
"Responsible Technologies for Responsible People since 1988"
P Please consider the environment before printing this email.
From: RE-wrenches On Behalf Of
toddc...@finestplanet.com
Sent: Friday, November 02, 2018 2:56 PM
To: RE-wrenches
Subjec
On Friday, November 2, 2018 12:40pm, "Michael Morningstar"
said:
William,
When one is doing a lot of bending of rigid conduit, where the finished length
of pipe needs to be determined, after all bends are made, and threading happens
first due to bends interfering with the threading mach
William,
When one is doing a lot of bending of rigid conduit, where the finished length
of pipe needs to be determined, after all bends are made, and threading happens
first due to bends interfering with the threading machine, one develops a DOPE
sheet. The term being borrowed from long distanc
I usually do the bend and cut method, because it really is faster and
EMT is cheap. Look how much time you are already cooking doing research
and exploring various apps, etc? I too have wanted to be the cool pro,
and bend to exact measurements, but alas, the sun is setting much sooner
now, an
Colleagues:
I am always trying to improve my conduit bending skills. I came upon this
scenario and need some input:
I am bending stubs at less than 90 degrees. How do I calculate stub
heights at less than 90 degrees? I am using the old
bend-it-longer-and-cut-it-to-length method but that do
10 matches
Mail list logo