i, January 21, 2011 1:36:57 PM
Subject: Re: [RE-wrenches] EnPhase male whips
Thanks, Nick. So you are continuing a daisy chain of inverters across a
required clear space or obstruction that necessitates a change of wiring
method. As you said, you end up needing both the male and female
nergy Solutions, LLC
PO Box 657
Petaluma, CA 94953
Cell: 707-321-2937
Office: 707-789-9537
Fax: 707-769-9037
From:
Kent Osterberg
To: RE-wrenches
Sent: Fri, January 21,
2011 11:20:18 AM
Subject: Re:
[RE-wrenches] EnPhase male whips
Nick,
Could you post a diagram showing w
terberg
To: RE-wrenches
Sent: Fri, January 21, 2011 11:20:18 AM
Subject: Re: [RE-wrenches] EnPhase male whips
Nick,
Could you post a diagram showing when a male whip is useful? I'm having a
really hard time envisioning a need for one.
Kent Osterberg
Blue Mountain Solar, Inc.
Nick Sole
33 PM
Subject: Re:
[RE-wrenches] EnPhase male whips
Eric:
You connect the factory provided termination kit to the Enphase array
on
each roof. All of the Enphase inverters on one array do not need to
be in a daisy configuration.
I have attached a drawing hat should illustrate
William M
-769-9037
From: William Miller
To: RE-wrenches
Sent: Thu, January 20, 2011 6:22:33 PM
Subject: Re: [RE-wrenches] EnPhase male whips
Eric:
You connect the factory provided termination kit to the Enphase array on each
roof. All of the Enphase inverters on one
Eric:
You connect the factory provided termination kit to the Enphase array on
each roof. All of the Enphase inverters on one array do not need to be in
a daisy configuration.
I have attached a drawing hat should illustrate
William Miller
805-440-5161 Cell
At 11:06 AM 1/20/2011, you wro
I'm looking for a ~10A charge controller for a 12V battery with
adjustable LVD that goes up to at least 12V. Priorities in order are:
1. Small in size
2. Good
3. Cheap
The best I can come up with now is the Xantrex C12. Looking for
alternatives. Recommendations?
Jaso
Eric,
Why doesn't a female whip (the standard Enphase branch circuit kit
component) work? Seems like both subarrays should have a female whip
going to a SolaDeck. Then from both SolaDecks to a j-box in the attic.
Kent Osterberg
Blue Mountain Solar.
Eric Thomas wrote:
I know its a funny
Does cutting the end off change any UL listing?
I'm going to be installing a similar system for the lab facility at school, and
see the same problem coming my way.
Jesse
Jesse
Sent from my iPhone
On Jan 20, 2011, at 1:37 PM, Kent Osterberg wrote:
> Eric,
>
> If the male end is energize
Eric,
If the male end is energized when disconnected, it's a hazard!
Kent Osterberg
Blue Mountain Solar, Inc.
Eric Thomas wrote:
I know its a funny title butwhy doesn't EnPhase make whips
with male connectors? We are having trouble laying out a system with
multiple sub arrays. We nee
E-wrenches'
*Subject:* Re: [RE-wrenches] EnPhase male whips
We cut the extensions all the time to jump from deck to deck. You used to
have to have the proper pin out schematic to pair the proper wires but now
they’re labeled L1,L2,L3, and then a green yellow wire for neutral. Just cap
the L3 if y
Chad Waits
Net Zero Solar
520.270.4873
chadwa...@netzerosolar.net
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Eric Thomas
Sent: Thursday, January 20, 2011 12:06 PM
To: re-wrenches@lists.re-wrenches.org
Subject: [RE-wrenches] En
I know its a funny title butwhy doesn't EnPhase make whips with male
connectors? We are having trouble laying out a system with multiple sub
arrays. We need to cable to sub arrays that are on different roof planes in
order to make up our circuits. From 5 micros on roof one, into attic, out of
S
13 matches
Mail list logo